MPG PC7555B Operating instructions

PC7555A/B/C/D

Christmas Topiary

Assembly Instruction

Note: Current packaging is the way Topiary

should be stored when not in use

Instructions

Step 1 Twist the bottom locking cap counter-clockwise to remove finial from topiary body

Step 2 Pull the bottom locking cap from its place very carefully, removing attached finial

Step 3 Twist the bottom locking cap counter-clockwise to detach finial from bottom locking cap

Step 4 Detach the bottom locking cap from the finial

Step 5 Return bottom locking cap back to its original position

Step 6 Turn bottom locking cap clockwise until it locks in place

Step 7 Insert the bottom of the finial into the thread in the top of the base as pictured

Step 8 Turn finial clockwise until it locks in place

Add Counterbalance (Optional)

Step 1 Remove the bottom lock from its place

Step 2 Pour in a fair amount of pebbles or sand

Step 3 Put bottom locking cap back in place and twist to lock in place

Apply Felt Pads if Using With an Urn or Container

This manual is also suitable for

Download PDF