Product Guid
e
PLC-Backup
CPSA-PCB100
Thank you for purchasing this product. The product you have purchased consists of the
following items.
Check, with the following list, that your package is complete.
If you find any item either missing or damaged, please contact the sales representative you
purchased the product from.
For appropriate usage, be certain to read the Reference Manual before using this product.
Visit our website for downloading free software or other software tools
The following manuals come with this product. Visit our website and download them by
entering the model type in "Downloads". Read them before using the product.
Name Contents How to get
Product Guide (This sheet) This lists the product configuration and
describes the precautions
Included in the
package (Printed
matter)
Reference Manual This describes the hardware and software
as
p
ects such as settin
g
s.
Download (PDF)
Download
https://www.contec.com/download/search/
1. About the Unit
This product is a controller which periodically obtains and saves programs and configured
data as well as parameters of the PLC used in a control device so that they can be restored
easily when the system fails.
It supports the PLCs of the most major manufacturers and backs up the specified area re-
quired by user.
Setting the backup area can be specified with ease through a browser.
2. Product Configuration
This product consists of the items listed below.
Check, with the following list, that your package is complete. If you discover damaged or
missing items, contact your retailer.
Product...1 End Cove
r
...1 Product Guide...1 Warrant
y
Certificate...1
Serial Number Label...1 3-pin Connecto
r
...1 6-Pin Connecto
r
...1 DIN rail...1
CODESYS Runtime
license...1
(attached on the side of
the product)
3. Safety Precautions
Understand the following definitions and precautions to use the product safely.
Safety Information
This document provides safety information using the following symbols to prevent acci-
dents resulting in injury or death and the destruction of equipment and resources. Under-
stand the meanings of these labels to operate the equipment safely.
DANGER
DANGER indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING
WARNING indicates a potentially hazardous situation
which, if not avoided, could result in death or serious in-
jury.
CAUTION
CAUTION indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate in-
jury or in property damage.
Handling Precautions
DANGER
Do not use the product in locations exposed to a flammable or corrosive gas. It may
cause explosion, fire, electrical shock, or malfunction.
Do not allow this device to come into contact with foreign substances (metal particles,
flammable substances, liquids, etc.) Otherwise, it can cause fire or electrical shock.
Do not place this device in an unstable location or use incomplete mountings. This may
cause the device to fall.
Be sure to connect the product to the stipulated power supply voltage. Connecting to a
different voltage might cause a fire or electrical shock.
If the product is used in a manner not specified by the manufacturer, the protection pro-
vided by the equipment may be impaired.
The product is not intended for use in aerospace, space, nuclear power, medical equip-
ment, or other applications that require a very high level of reliability. Do not use the
product in such applications.
If using the product in applications where safety is critical such as in railways, automotive,
or disaster prevention or security systems, please contact your retailer.
CAUTION
Be certain the following requirements are satisfied when using the product.
- Indoor use
- Altitude up to 5000m
- Applicable POLLUTION DEGREE 2
When using the product at high altitudes, refer to the relational expression below to
find an appropriate ambient temperature. The heat dissipation decreases due to air
pressure drop and could lead to damages or a shorter product life.
- Ambient temperature = 60[°C] - 0.005 x altitude [m]
An Example)
The product is used at 3000 meters
60°C - (0.005 x 3000m) = 45°C (Ambient temperature)
Do not use or store the product in a location exposed to extremely high or low temper-
ature or susceptible to a rapid temperature change.
Example: - Exposure to direct sun
- In the vicinity of a heat source
Do not use the product in extremely humid or dusty locations. It is extremely dangerous
to use the product with its interior penetrated by water or any other fluid or conductive
dust. If the product must be used in such an environment, install it on a dust-proof con-
trol panel, for example.
Avoid using or storing the product in locations subject to shock or vibration that exceeds
range of specification.
When transporting the product, take suitable measures to avoid applying shock or vibra-
tion directly to the product.
Impact resistance: 15G (11ms) below.
Use the product in the specified operating condition (temperature, humidity, vibration
and shock).
The product should always be grounded (earth).
Avoid installing in the place where ventilation of the product may compromise. Insuffi-
cient aeration could heat up the product and lead to malfunctions or damages.
Do not use the product in the vicinity of devices that generate strong magnetic force or
noise. Such products will cause the product to malfunction (stop, reboot).
Do not use or store the product in the presence of chemicals.
When removing connectors or cables, always unplug the power cables and confirm the
LEDs are turned off.
Do not modify the product. CONTEC will bear no responsibility for any problems, etc.,
resulting from modifying the product.
In the event of failure or abnormality (foul smells or excessive heat generation), unplug
the power cables immediately and contact your retailer.
To connect with peripherals, use a grounded, shielded cable.
To clean the product, wipe it gently with a soft cloth dampened with either water or mild
detergent. Do not use chemicals or a volatile solvent, such as benzene or thinner, to
prevent the paint to be scraped or discolored.
When connecting cables, first check the shapes of connectors, and then insert them in
the correct orientation. After they are connected, do not put too much load on the con-
nected part. Doing so may result in poor contact or damage to the product and the
connected part.
Do not touch metal parts or terminals with your hands when the product is in operation.
Otherwise, the product may malfunction, or cause failure.
Do not touch the product or connectors with a wet hand to avoid electric shock.
The specifications of the product are subject to change without notice for enhancement
and quality improvement. Even when using the product continuously, be sure to read the
manual in the CONTEC's website and understand the contents.
When the product is used in a place that is affected by overcurrent or overvoltage (light-
ning surge), select appropriate surge protection device for all of the route (Power line,
signal line, earth, etc.). Consult with the specialist regarding selecting, purchasing, and
setting the surge protection device.
When disposing of the product, follow the disposal procedures stipulated under the rel-
evant laws and municipal ordinances.
Always attach the end cover while power is active.
The product is an open-type device (a device designed to be housed inside other equip-
ment) and must always be mounted inside a mechanical enclosure having enough
strength.
Disconnection between the product and the module during the operation may lead to
damages. To prevent the disconnection, always mount both of them on DIN rail for op-
erations.
The product can become extremely hot during the operation. When you intend to
touch the product for the maintenance work, turn off the power first, and leave it to cool
off for 20 minutes, then start the works.
About a caution mark on the product : Touching the product may cause a burn as the
surface becomes extremely hot during the operation.
Regardless of the foregoing statements, CONTEC is not liable for any damages whatso-
ever.
(Including damages for loss of business profits) arising out of the use or inability to use
this CONTEC product or the information contained herein.
About the handling of the battery and the
storage battery in EU signatory
Note:
This symbol mark is according to the directive 2006/66/EC
Article 20 Information for end-users and Annex II.
This symbol mark is according to the directive 2006/66/EC Article 20 Information for end-
users and Annex II.
This symbol means that batteries and accumulators, at their end-of-life, should be disposed
of separately from your household waste.
If a chemical symbol is printed beneath the symbol shown above, this chemical symbol
means that the battery or accumulator contains a heavy metal at a certain concentration.
This will be indicated as follows:
Hg: mercury (0.0005%), Cd: cadmium (0.002%), Pb: lead (0.004%)
These ingredients may cause serious hazardous for human and the global environment.
Please refer to the Reference Manual for the annulment of detaching a detailed battery
specification and the battery and the batteries.
4. SOFTWARE LICENSE AGREEMENT
PLEASE READ THIS SOFTWARE LICENSE AGREEMENT (the “Agreement”) CAREFULLY BE-
FORE OPENING THE PACKAGE OF, DOWNLOADING, INSTALLING, OR USING THE CONTEC’S
SOFTWARE. THIS AGREEMENT SET FORTH TERMS AND CONDITIONS REGARDING THE LI-
CENSE TO USE CONTEC’S SOFTWARE DESCRIBED IN THE LICENSE SHEET (the “Software”).
BY OPENING THE PACKAGE, DOWNLOADING, INSTALLING OR USING THE SOFTWARE,
CUSTOMERS ARE AGREEING TO BE BOUND BY THE AGREEMENT. IF CUSTOMERS DO NOT
AGREE TO THE AGREEMENT, CUSTOMERS MAY RETURN THE PRODUCT, WITHOUT OPEN-
ING THE PACKAGE, TO THE PLACE WHETERE CUSTOMERS OBTAINED IT FOR A REFUND.
CUSTOMERS MAY NOT OPEN THE PACKAGE OF, DOWNLOAD, INSTALL OR USE THE SOFT-
WARE WITHOUT AGREEING TO THE AGREEMENT.
Article 1. Intellectual Property Rights
The copyright, patent right or any other intellectual property right pertaining to the Soft-
ware or any documentary attachments, such as manuals or license sheets, as well as any
copies thereof (the “Software and the Like”)shall belong to CONTEC, and customers shall
have no rights therefor other than those expressly authorized herein.
Article 2. Permitted License
1. CONTEC grants customers a non-exclusive right to install and use, free of charge, the
Software solely for the purpose of using hardware products onto which the Software
has been installed.
2. Customers may copy the Software for a minimum number of times as necessary solely
for emergency backup purposes in using the Software. However, description regarding
any of the rights pertaining to the Software supplied by CONTEC shall be attached to
any such copies.
3. Customers may incorporate software provided by CONTEC as a library onto software
created by the customer.
Article 3. Restrictions on Use
Customers shall not:
(1) Create any derivative software from the Software other than as set forth herein;
(2) Copy the Software other than as set forth therein;
(3) Modify, adapt, decompile, disassemble or reverseengineer the Software; or
(4) Delete or alter the representation or trademark of the rights of the Software.
Article 4. Limited Liabilities
1. Except expressly warranted in article 7, CONTEC hereby disclaims any warranty with re-
spect to the software, either express, implied or statutory, including but not limited to,
the implied warranties of merchantability, of satisfactory quality, or fitness for a particu-
lar purpose and/or noninfringement of third party rights.
2. To the extent not prohibited by law, in no event shall CONTEC be lilable for personal in-
jury, or any incidental, special, indirect or any other commercial damages or losses, aris-
ing out of or related to your use or inability to use the software and the like.
Article 5. Transfer
1. Customers may transfer their rights authorized in accordance with this Agreement, to a
third party only when the customer satisfies all of the following conditions:
(1) The customer transfers the Software and the Like, or the Software installed in the
hardware to such third party together with the Agreement and the license sheet; and
(2) The recipient of the transfer agrees to the terms and conditions herein.
2. When the Software and the rights are transferred in accordance with Section 1 of Arti-
cle 5, the recipient of the transfer shall be deemed to be bound by the Agreement from
the time of such transfer.
Article 6. Termination
1. CONTEC may terminate the Agreement with immediate effect without any notice or de-
mand to the customer if the customer fails to comply with any of the provisions herein.
2. Upon the termination of the Agreement, the customer’s license shall cease to be effec-
tive. The customer shall immediately discontinue using the Software in any way, and
shall uninstall and destruct any reproduction of the Software.
Article 7. Limited Warranty on Media
1. CONTEC warrants the media on which the Software is recorded and delivered by CON-
TEC to be free from defects in materials and workmanship under normal use for a pe-
riod of 30 days from the original retail purchase. Customers exclusive remedy shall be
replacement of the Software which is returned to CONTEC through the distributor.
Article 8. Information regarding the Software
1. The information and/or updated program will be delivered through the website of
CONTEC.
2. The information and/or updated program will be licensed to the Customers in accord-
ance with the Agreement.
Customers may use the information and/or updated program at their discretions and re-
sponsibilities, however, in case the Customers use such information and/or updated pro-
gram they shall comply with the terms and conditions of the Agreement.
Article 9. Export Control
1. Customers shall comply with the Foreign Exchange and Foreign Trade Act of Japan, the
U.S. Export Administration Regulation and the laws and regulations of any other coun-
try when taking the Software and the Like outside Japan.
2. Customers shall not transfer, export or re-export the Software and the Like to any indi-
vidual or entity that is likely to use the Software and the Like to design, develop or
manufacture nuclear weapons, biochemical weapons, or to design, develop or manu-
facture missiles.
3. Customers shall not transfer, export or re-export the Software and the Like to any indi-
viduals or entities set forth in the following countries or regions:
(1) The Republic of Cuba, The Islamic Republic of Iran, the Republic of Iraq, the Great
Socialist People’s Libyan Arab Jamahiriya or North Korea;
(2) Any individuals or entities on the “List of Foreign Users” based on the Import Trade
Control Order or the U.S.
Department of Commerce Denied Person’s List or Entity List; or
(3) Any country, region, individual or entity designated by the government of Japan, the
U.S. or any other relevant country.
Article 10. Governing Law
The provisions herein shall be construed and governed in accordance with the laws of Japan.
This Agreement shall not be governed by the United Nations Convention on Contracts for
the International Sale of Goods, the application of which is expressly excluded.
Article 11. Dispute Resolution
Upon the occurrence of any dispute in relation to the Agreement or the Software, if any
legal procedures are required, such as the filing of a petition for a lawsuit, the Osaka District
Court shall have the exclusive jurisdiction over such dispute.
Article 12. Severability
If for any reason any portion of the provisions set forth herein is found to be invalid or
unenforceable, the remainder of the Agreement shall not be affected in any way and shall
be valid and enforceable to the extent permitted by law.
CONTEC CO.
,
LTD.
3-9-31
,
Himesato
,
Nishi
y
odo
g
awa-ku
,
Osaka 555-0025
,
Ja
p
an
https://www.contec.com
/
No part of this document may be copied or reproduced in any form by any means
without prior written consent of CONTEC CO., LTD.
NA06316 (LYWE193) 11012018_rev3 [10222018] Vovember 2018 Edition
5. Specifications
Hardware Specifications
Item CPSA-PCB100
CPU ARM Cortex-A8 600MHz
Memor
y
On Board 512MB DDR3 SDRAM
ROM On-Board 32MB NOR Flash for OS
LAN Transmission standard 10BASE-T/100BASE-TX
The number of channels 2 (Occupied)
Connecto
r
RJ-45 Connecto
r
LED Speed (Yellow), Link/Act (Green)
USB (unavailable)
SD card
slot
(Occupied)
Standard SD standard follow
Connecto
r
SD memor
y
card slot
LED Read/Write (Green)
RS-232C Baud Rate 300bps - 115.2kbps
Data len
g
th 5, 6, 7, 8 bit 1, 1.5, 2 stopbit
Parit
y
check Even, Odd, Non-parit
y
Isolation/Resistance Non-isolated
The number of channels 1
Connecto
r
9-pin D-SUB connector (Male)
LED Transmission (Green), Reception (Green)
Di
g
ital input and Output (unavailable)
Stack Bus The maximum number of
stack buses
16 *1
LED Power (Green)/Status 1 (Green)/Status 2 (Red) /
Error (Red)
Switch Power SW, Rotary SW, DIP SW
(unavailable)
RTC RTC built-in (batter
y
within)
Power
supply *2
Rated input volta
g
e 24VDC
Input volta
g
e ran
g
e 21.6 - 26.4VDC
Power consumption Controller alone: 24V 0.3A (Max.)
With module(s): 24V 3.6A (Max.)
Connecto
r
2-piece 3.5mm pitch 3-pin terminal (V+, V-, FG)
Applicable wire AWG20 - 16
Surge protection element
V+ - V-, V- - FG
Interactive TVS diode
Stand off voltage: ±30V,
Peak pulse power: 400W(1msec)
Ph
y
sical dimensions (mm) 44.7(W)×94.7(D)×124.8(H) (No pro
j
ection included)
Wei
g
ht 300
g
Installation method Quick mountin
g
on the 35mm DIN rail
OS Linux kernel 3.2
*1 The total current consumption of the devices should be less than 3.3A
*2 Use power cable within 3 meters.
Installation Environment Requirements
Item CPSA-PCB100
Operatin
g
ambient temperature -20 - +60°C *3
Operatin
g
ambient humidit
y
10 - 90%RH (No condensation)
Non-operating ambient tempera-
ture
-20 - +60°C
aNon-operatin
g
ambient humidit
y
10 - 90%RH (No condensation)
Floatin
g
dust particles Not to be excessive
Corrosive
g
ases None
Line-noise
resistance
Line noise AC Line /±2kV *4
Signal Line /±1kV (IEC61000-4-4 Level 3, EN61000-4-4
Level 3)
Static electricity
resistance
Touch /±4kV (IEC61000-4-2 Level 2, EN61000-4-2 Level 2)
Air /±8kV (IEC61000-4-2 Level 3, EN61000-4-2 Level 3)
Vibration re-
sistance
Sweep resistance 10 - 57Hz *5
/
semi-amplitude vibration 0.15mm,
57 - 500Hz/2.0G
40minutes each in X, Y, and Z directions (JIS C60068-2-6-
compliant, IEC60068-2-6-compliant)
Shock resistance 15G half-sine shock for 11ms in X, Y, and Z directions
(JIS C 60068-2-6
–
compliant, IEC 60068-2-6 -compliant)
Groundin
g
Class D
g
roundin
g
, SG-FG / non-conduction
Standard VCCI Class A, FCC Class A,
CE Markin
g
(EMC Directive Class A, RoHS Directive)
*3 If you use the USB with bus power, operate the product at between -20 and +55°C.
*4 When you use an optional power product
*5 When you use an optional power product: 10-55Hz (See the manual of optional power prod-
uct for details)
Function Specifications
Item CPSA-PCB100
Supportable PLC *6 Up to 5 PLCs can be connected per series.
SHARP JW300 series: JW50H/70H/100H series, JW30H series
Connection method Ethernet or RS-422 (one-on-one connection)
Communication speed 4800/9600/19200 BPS
(Dependin
g
on the PLC functions)
*6 Please visit the Contec website to check the latest supportable PLC in the Reference Manual.
6. Physical Dimensions
[mm]
94.75.1
44.7
124.8
(14)
Open
Lock
4
(18)
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Contec CPS-SSI-4P Owner's manual
-
Contec DX-U1100P1 NEW Owner's manual
-
-
-
Contec CPS-TM341GMB-ADSC1-931 Owner's manual
-
-
-
Contec CPS-MC341-ADSC1-931 Owner's manual
-
-
Contec CPS-MC341-DS1-111 Owner's manual