CARACOLE TRADITIONAL
TWO PEOPLE AND PHILP'S SCREW DRIVE RREQUIRED
ASSEMBLY INSTRUCTIONS
UNPACK ALL PARTS AND CHECK THEM AGAINST PARTS LIST ON THIS INSTRUCTION SHEET BEFORE DISCARDING PACKING AND CARTONING!!
1) Connect the side rail and headboard/footboard by bolt (F).
2) Assemble the side rail and headboard/footboard using the curved washer (A),
flat washer (B), lock washer (C), and nut (D) tighten by wrench (E), as shown in Diagram A.
3) Assemble the support leg on the slat, as shown in Diagram B.
4) Mount the assembled support slats (done in step 3) onto the cleat of side rails with screws (G).
Use a Phillips Head Screwdriver to tighten screws, as shown in Diagram C.
KING BED
1
2
1
1
QTY
4
3
Slat (4)
Part Description Part No. QTY
TRA-QUEBED-021H/F/R
QUEEN BED
Headboard (1)
Footboard (2)
Side rail (3)
RTA Hardware(7)
1
1
2
1
Part No.
1 of 2
TRA-KINBED-021H /F/R
TRA-QUEBED-021H
Flat Washer(5/16"Dia)
Curved Washer(5/16"Dia)
Hardware List
RTA Hardware(7)
Q'ty(Queen bed)
G
RTA Hardware(6)
Hardware List
Screw(4.2x32)
16
RTA Hardware(6)
1
1
Support leg(5)
3 8
TRA-QUEBED-021F
TRA-QUEBED-021F-3067
TRA-KINBED-021H
CAL KING BED
1
2
1
1
QTY
4
Part No.
TRA-KINBED-021H/F-CALBED-021R
1
8
TRA-QUEBED-021R
TRA-QUEBED-021F-30305
TRA-QUEBED-021F-3001
TRA-QUEBED-021R-3001
TRA-KINBED-021F
TRA-QUEBED-021R
TRA-KINBED-021F-3067
TRA-KINBED-021F-30305
TRA-KINBED-021F-3001
TRA-QUEBED-021R-3001
TRA-KINBED-021H
TRA-KINBED-021F
TRA-CALBED-021R
TRA-KINBED-021F-3067
TRA-KINBED-021F-30305
TRA-KINBED-021F-3001
TRA-QUEBED-021R-3001
TRA-KINBED-QUEBED-CALBED-021H/F/R