Enough Power Technology GOLISI L2 User manual

  • Hello! I am an AI chatbot trained to assist you with the Enough Power Technology GOLISI L2 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
GOLISI® L2
Golisi L2 is a smart and compact mini charger developed by Shenzhen
Enough Power Technology according to customers' feedback.
As previous models, L2 is compatible with 3.6V/3.7V Li-ion batteries and 1.2V
Ni-cd / Ni-mh batteries. Batteries size: 31-70 mm in length, 30 mm in diameter
The biggest improvement on L2 is that L2 allows users to choose charging
current manually among 0.5a , 1.0a and 2.0a for Li-ion batteries.
We will explain to you more detail about the performance characteristics of the
product following,
I, L2 advantages and functions:
1. Micro USB DC 5V/2A input, two independent slots and micro-computer
management system;
2. Current selection: 3.6V/3.7V Lithium battery-- 0.5A/1.0A/2.0A; 1.2VNi-MH
battery-- 0.5A
3. LEDs display charging status: steady red light indicates charging, green light
indicates that the battery is not contacted properly or the battery has ceased
charging, flashing red and green light indicates reverse loading or short circuit
4. It identifies lithium-ion (Li-ion) batteries and Ni-cd / Ni-mh batteries and
allocate current accordingly.
5. activate 0V dormant batteries
6. safety protections: over charge/ discharge, short circuit, smart identification
of bad battery / reverse loading protections
7. Charging mode, constant current and constant voltage;
8. With USB adaptor (not included), the charger's working power is 5V/2A
II, Button operation and LEDs indication:
1. Button operation: selecting charging current--press and hold the selection
button for more than 2 seconds to switch among 0.5A/1.0A/2.0A
2.LED indication: When L2 is connected to the 5V/2A power supply, all LEDs
illuminate instantly.
When no batteries loaded, only the row 1 the 0.5A (LED) and row 2 status
LEDs illuminate green
when batteries loaded, status LED(s) on row 2 turns from green to red when
charging, then turns into green when battery (ies) fully charged.
III Parameters:
1. Input power: Micro USB DC 5V/2A
2, Output voltage: 1.42V (for Ni-cd / Ni-mh batteries)
4.20V ± 0.05V (for Li-ion bateries)
3. Output current: Ni-cd / Ni-mh: 0.5A*1 or 0.5A*2
Li-ion: 0.5A/1.0A/2.0A*1 0.5A/1.0A*2
Precautions:
This charger should be used indoor. DO NOT use in rainy, snowy, high or low
temperature environment, or exposed to direct sunlight.
Children should NOT use this product without a parent or adult supervision
Please DO NOT disassemble or assemble this charger
Please DO NOT use this charger out of the operating temperature ranging 0 to
40 Celsius
After sales service:
Thank you for choosing Golisi products.
GOLISI provides after sale service. A free replacement is provided for any
quality or manufacturing fault within 15 days of your purchase
1 year free warranty.
After 2 year warranty, consumers are still eligible for limited repair service. Key
components replacement fees will be charged accordingly.
Above After-Sale Service does not apply to following situations:
1. Man-made damages or disassembling
2. Damage caused by incorrect operation
3. Damage caused by charging wrong types of batteries
Remark: Please view GOLISI Website for any updated information on this
product
Authentication: please check the authenticity at www.golisi.com
/