I. QC-100 OPERATING INSTRUCTIONS
1. Remove and discard any used QuickCheck Vial (QCV). If a vial is
!"#$"
saturated. This is especially a concern if more than one gas type of
%$
2. &'&$*
"*!$#
+!/**1$!+3$
!( Note::"$;"<
$=
3. %!#
4. >?%"#!$/PINCH
HERE TO BREAK INNER AMPOULE1 B ! >
$$!3"
Install the QCV into the QC-100, To install insert the QCV snuggly
into the opening on the right side of the instrument near the top.
6. *#$$ Note: A three
"#$!
$""#$
"#"!$
7. +$$
$
8. <$
< $# G 3!= G
3!=<<
9. HIJ#$+Note: Do not
continue testing if the QCV is depleted.
Page 2