2. GHISMA
  3. 403.62
403.62

GHISMA 403.62 Program Chart

  • Hello! I am an AI chatbot trained to assist you with the GHISMA 403.62 Program Chart. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
GB
D F NL E P GRGB I
DK
S N FIN
1.
Freezer compartment
2.
Control unit
3.
Area for drawers and pull out baskets
4.
Defrost water run-off channel
(extractable)
5.
Rating plate (fitted on the inside of the
appliance)
Storage compartment
PRODUCT CHART
Note: drawers and accessories may vary according to the model.
Controls
(depending on model)
A
Thermostat knob.
B
Yellow light: indicates that the rapid freeze function is in operation.
C
Red light: flashes to indicate that the temperature inside the freezer has risen very high.
D
Green light: indicates that the appliance is connected to the power supply.
E
Button for starting up rapid freeze function.
F
External illuminated thermometer (if fitted).
G
Mechanical thermostat (if fitted).
G
1- -2
4- -3
EBCD
A
Freezer compartment
1
2
3
4
5
5019 100 40000
D F NL E P GRGB I
DK
S N FIN
PRODUCT CHART
Regulating the temperature inside the freezer
The appliance is normally factory set to operate at a recommended temperature of -18°C.
To change the internal temperature :
•
Turn thermostat knob
A
towards the
1/Min
position if you wish to have a higher storage
temperature.
•
Turn thermostat knob
A
towards the
4/Max
position if you wish to lower the storage temperature.
•
Turn thermostat knob
A
to the
●
position to switch off the freezer (the appliance, however,
remains connected to the power supply).
Alarm indications
Indication Cause Solution
Temperature
alarm
The acoustic alarm and
red light
C
are activated.
Internal temperature is
higher than -12°C.
Press button
E
until
the temperature falls
back below -12°C.
/