SOLTEC SUNDIAL Installation guide

Type
Installation guide

SOLTEC SUNDIAL is a solar-powered LED bollard light designed to provide bright, energy-efficient illumination for pathways, gardens, and other outdoor areas. With its 3W LED and 360-degree solar panel, it delivers up to 300 lumens of warm white light (3000K) and can operate for up to 48 hours on a single charge. The durable polycarbonate construction and IP65 waterproof rating make it suitable for year-round outdoor use, while the simple installation process allows for easy mounting on walls or in-ground.

SOLTEC SUNDIAL is a solar-powered LED bollard light designed to provide bright, energy-efficient illumination for pathways, gardens, and other outdoor areas. With its 3W LED and 360-degree solar panel, it delivers up to 300 lumens of warm white light (3000K) and can operate for up to 48 hours on a single charge. The durable polycarbonate construction and IP65 waterproof rating make it suitable for year-round outdoor use, while the simple installation process allows for easy mounting on walls or in-ground.

01
SUNDIAL
Solar Bollard Light
3W
Installation Manual
SOLTECH Provides Advanced LED
Technology Powered With Eco-friendly,
Clean, Solar Energy.
02 03
01 Introduction 02 Specification
Thank you for purchasing SUNDIAL Urban Lighting Products.
Important
Please read these instructions before installation to ensure optimum results
and longevity of your lights. The solar panel should be charged in full
sunlight for 8 to 9 hours before initial first use to provide optimum results.
Features
• Solar panel has a full 360 design to track full sunlight source.
• Polycarbonate PC protective light cover.
Notice & Warning
1. The SUNDIAL will provide optimum performance where there is
enough sunshine.
2. Please note the lighting time depends on sunshine exposure
and weather.
3. The lamp will automatically turn on at dusk.
4. Non-professionals please do not disassemble the lamp.
5. The battery contains hazardous chemicals. Please dispose of
used batteries properly.
Please Note
Continuous rain or cloudy days will not fully charge the battery,
so the light’s output length will decrease.
Ordering Information Chart
SUNDIAL 3W
3W 3W 3W
Mono-Crystalline 4.3V 3W Mono-Crystalline 4.3V 3W Mono-Crystalline 4.3V 3W
3.7V 10AH3.7V 10AH 3.7V 10AH
300300 300
LED Nominal Power
Solar Panel
Lithium Ion Battery
CCT
Lumen Output@3000K
Beam Angle
70 70 70
Light Head 8.4 X 8.0 Inches
Ground Mount 24.0 Inches
Light Head 8.4 X 8.0 Inches
Ground Mount 42.0 Inches
Light Head 8.4 X 8.0 Inches
Wall Mount 13.0 Inches
217°217° 217°
3,000K3,000K 3,000K
CRI
Product Size
1 Mode1 Mode 1 Mode
PC & Aluminum PC & Aluminum PC & Aluminum
100 lm/W100 lm/W 100 lm/W
14hrs (1000W/m2)14hrs (1000W/m2)14hrs (1000W/m2)
48 Hrs48 Hrs 48 Hrs
-4 °F to 130 °F -4 °F to 130 °F -4 °F to 130 °F
5 °F to 140 °F 5 °F to 140 °F 5 °F to 140 °F
IP65IP65 IP65
Waterproof Rate
Casting
Efficiency@3000K
* Charging Time
Run Time (@Full Power)
Operation Mode
* Operating Temperature
* Charging Temperature
* The temperature can impact the battery’s charging and normal operation. * The solar charge time data is base on 77 degree F ambient temperature with the
panel pointed directly at the solar radiation. The standard radiation value is 1000W/m2.
SUNDIAL 3W 42”SUNDIAL 3W 24 SUNDIAL 3W 13“
Specifications
STL-SDL
=SUNDIAL
SERIES WATTAGE COLOR
TEMPERATURE
MOUNTING
OPTIONS SIZE
03=3W 300 Lumens 3=3000K GR=Ground Mount
WM=Wall Mount
24=24 inches
42=42 inches
13=13 inches
- - - -
8.0 inches
42.0 inches
24.0 inches
8.4 inches 8.4 inches 8.4 inches
13.0 inches
04 05
03 Installation
GROUND MOUNT
01 0103 03
04 04
WALL MOUNT
Drill three holes in the
base material, then use
the screw kit to secure
the ground mount base.
Drill three holes on the base
of the existing surface then
use the screw kit to secure
the surface mount base.
Press the red button on
the bottom of the fixture to
turn it on.
Press the red button on the
bottom of the fixture to turn
it on.
Use the screw kit to fix the
light onto the pole.
Use the screw kit to fix the light
onto the pole.
Use the screw kit to fix
the pole onto the ground
mount base.
Use the screw kit to fox
the pole onto the surface
mount base.
02 02
When installing the ground
mount base, please put
Part A and Part B into the
ground holes first then
install the ground mount
base on top.
Part A
Part B
Ground Mount Base
When installing the surface
mount base, please put
Part A and Part B into the
surface holes first then
install the surface mount
base on top.
Part A
Part B
Wall Mount Base
06 07
04 Luminous Distribution
SUNDIAL 3W
05 Warranty
SUNDIAL is covered by a 3 year limited warranty. SOLTECH
urban light warrants to the original purchaser that this
product is free from defects in materials and workmanship
for the period of 3 years from date of purchase. To obtain
warranty service please contact your local distributor or sales
rep for further instruction.
SOLTECH Provides
Advanced LED
Technology Powered
With Eco-friendly,
Clean, Solar Energy.
08
Copyright©2021–2022 SOLTECH LLC,
All Rights Reserved.
SOLTECH LLC reserves the right to update all
product data sheets at any time. Consult SOLTECH
marketing specialists for publication updates at
1460 Park Avenue.
Emeryville, CA 94608 USA
www.soltechlighting.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

SOLTEC SUNDIAL Installation guide

Type
Installation guide

SOLTEC SUNDIAL is a solar-powered LED bollard light designed to provide bright, energy-efficient illumination for pathways, gardens, and other outdoor areas. With its 3W LED and 360-degree solar panel, it delivers up to 300 lumens of warm white light (3000K) and can operate for up to 48 hours on a single charge. The durable polycarbonate construction and IP65 waterproof rating make it suitable for year-round outdoor use, while the simple installation process allows for easy mounting on walls or in-ground.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI