FRONT BUMPER CAN AM MAVERICK SPORT
THANK YOU!
FOR PURCHASING AT AFX MOTORSPORTS
HOW TO INSTALL
Pieces included:
properly, misused, or modified.
Liability Statement
Tools needed (Not included):
Allen Key.
Combination Wrench.
(4x) 1/4 x 2” Bolts and nuts.
(8x) Flat washe
1
2
Place the bumper over the front tubes, aligning the
hardware (as it is shown in the image).
Use four 1/4 x 2” screws with nut and washer (as it is shown
in the image)(do no tighten yet).
Screw
Screw
Front bumper
Hardware:
Double
Washers