2. Crystorama
  3. 585-EB-GA
585-EB-GA

Crystorama 585-EB-GA User manual

  • Hello! I've reviewed the assembly instructions for the Crystorama 585-EB-GA light fixture. This document outlines the necessary steps for assembling the fixture, including installing the stem, candle sleeves, and adjusting the metal rings. It also provides important information on bulb requirements and safety precautions. I'm here to answer your questions about this light fixture and its assembly.
  • What type of bulbs are recommended?
    Is this fixture suitable for damp locations?
    How many bulbs are needed for this fixture?
21"
23"
ASSEMBLY INSTRUCTION MODEL #585-EB-GA
You will need 6 - Candelabra Base Bulb
40 Watts Recommended 60 Watts Max.
USE LED BULBS FOR EXTENDED USE
RECOMMENDED G16-1/2"
1.Attach one end of the stem
onto the wiring house and the
other end onto the swivel.
2.Place the candle sleeve onto
the socket and insert
recommended bulb (not
included).
3.Adjust the flat metal rings to
the preferred angle.
THIS FIXTURE IS DAMP RATED
PART NUMBER MODEL #585-EB-GA
A. (1) - Mounting Hardware
B. (1) - Canopy(W4.75",H0.75") #XRE580EBGACAN4.75IN
C. (1) - Collar Ring
D. (1) - Collar Loop
E. (2) - Quick Link
F. (1) - Hanging Chain(72",4mm) #XRE584EBGACHA4MM
G. (1) - Fixture Loop
H. (1) - Swivel
I. (1) - Center Stem(11.42",12.7mm) #XRE585EBGASTEM
J. (6) - Candle Sleeve(W0.87",H2.76") #XRE584EBGACDL2.76IN
K. (1) - Ball Finial #XRE584EBGAFIN
B
D
E
F
G
H
I
K
A
C
J
/