RayRun BR03-CG User manual

Brand
RayRun
Model
BR03-CG
Type
User manual

RayRun BR03-CG is a multi-channel LED remote controller that allows you to control various lighting functions such as dimming, color changing, scene setting, and grouping. With its wireless connectivity, you can easily pair it with up to 5 receivers and control multiple lights simultaneously. The remote features a user-friendly interface with dedicated buttons for power, color adjustment, group selection, and scene control.

RayRun BR03-CG is a multi-channel LED remote controller that allows you to control various lighting functions such as dimming, color changing, scene setting, and grouping. With its wireless connectivity, you can easily pair it with up to 5 receivers and control multiple lights simultaneously. The remote features a user-friendly interface with dedicated buttons for power, color adjustment, group selection, and scene control.

LED Remote Controller
Model: BR03-CG
Turn ON/OFF
Activate color changing.
Double click to change
color mixing mode.
Switch group or scene
function for the digit keys.
The indicator will flash for
a while at group mode.
Dimming / Changing color.
Switch group mode to all
members. All paired receivers
will response to the remote
after pressing this key.
At scene mode: click to recall
the scene, hold press to save
current status to the scene
position.
At group mode: select
destination group, only
current group member will
response to the remote after
selection.
Indicator
Function
Operation
1. Pair and unpair the remote to receiver
Specification
Working voltage
Wireless protocol
Frequency band
Wireless power
Working temperature
DC 3V, CR2032 battery
Umi protocol based on SIG BLE Mesh
2.4GHz ISM band
< 7dBm
-20-55 C(-4-131 F)
Battery:
CR2032
Remove
before use
For Multi-Channel
Dimming / Color
Scene / Group
The remote controller needs to be paired to receiver to work. User can pair up to 5
remote controllers to one receiver and each remote controller can be paired to any
receiver.
To pair or unpair remote to the receiver, please operate with following steps:
1). Cut off the power of receiver and power on again after more than 5 seconds.
2). Press remote and key simultaneously and briefly within 10 seconds after
receiver powered on.
3). Release all keys, then press key or 1-4 digit key within 10 seconds. For
key, the receiver will be paired without group feature, for 1-4 key the receiver will be
paired to 1-4 target group.
4). To unpair the remote from receiver, do the step 1-2 first, then release all keys
and press key within 10 seconds.
Umi Smart Wireless
3
1
4
2
2. Adjust color
Press the key to activate color adjusting. The + and - key will swap to color
adjusting function shortly. The indicator will flash at color adjusting mode.
3. Change RGB/White mixing mode
Double click the key to change color mixing mode.
For RGB+White and RGB+CCT receivers, the color mixing mode can be switched
between white(CCT), RGB and White(CCT)+RGB mode.
5. Switch target group
To switch the target group, please press the key first, then press the target
group digit key. For example, to switch to group one, please press then key. The
remote controller function will switch to the target group shortly. To restore the remote
controller to all groups, please press key.
4. Load and save scenes
The default function of 1-4 digit keys are for scene function. User can short press 1-4
key to load scene. To save a scene, please adjust the favorite light status first, then hold
press 1-4 digit key to save current status to relative scene position. After saving
operation, user can load the saved scene by short press the digit key.
型号:BR03-CG
单击激活颜⾊调节，
双击更改颜⾊混合模式
3
1
4
2
2.调节颜⾊
按键激活颜⾊调节功能。激活颜⾊调节功能后，+和-键将短时间切换到颜⾊调
节功能。在颜⾊调节模式下遥控器指⽰灯会慢速闪烁。
3.更改RGB/⽩⾊混合模式
双击键可更改颜⾊混合模式。
对于RGBW和RGB+CCT控制器，混⾊模式可以在⽩⾊（CCT）、RGB和⽩⾊（CCT）
+RGB模式之间切换。
4.调出和保存场景
1-4数字键的默认功能为场景功能。⽤⼾可以短按1-4键调出已保存的场景。
若要保存场景，请⻓按1-4数字键将当前灯光效果保存到相应的场景位置。保存场
景后，可以通过短按数字键调出保存的场景。
功能
开/关 指⽰灯
调节亮度/颜⾊
切换场景和分组功能，
激活分组模式后
遥控器指⽰灯会闪烁
从分组模式切换到全体模式。
按下此键后，所有已配对的灯
具/控制器均会响应遥控器。
场景模式下（默认）：点击调⽤
场景，⻓按保存当前状态到场
景位置。
分组模式下：选择分组后只有
⽬标群组会响应遥控器。
电池:
CR2032
使⽤前取
下绝缘⽚
操作⽅法
1.配对到灯具或控制器
遥控器需要与灯具或控制器配对才能⼯作。⼀个灯具或控制器最多可以配对5个
遥控器，遥控器则可以与任意灯具或控制器配对。
请按以下步骤操作来完成遥控器配对或取消配对：
1).将⽬标灯具或控制器断电，在超过5秒后再通电。
2).在灯具或控制器通电后的10秒内，同时短按遥控器上的与键。
3).松开所有按键，然后在10秒内按键或1到4任意数字键。如果按下
键，灯具或控制器会与遥控器配对但不会被分配到任何分组；如果按下1到4号数字按
键，灯具或控制器会与遥控器配对且被分配到相应数字的分组。
4).若要取消遥控器与控制器的配对，请先执⾏步骤1-2，然后松开所有键并在10
秒内按下键。
5.切换⽬标群组
要切换分组，请先按键，然后随即按下⽬标组数字键。例如，要切换到第⼀组，
请按再按键，遥控器的所有控制功能将切换到分组1。要将遥控器切换到所有
灯具或控制器，请按下键。
规格
⼯作电压
⽆线协议
频段
⽆线功率
⼯作温度
DC3V,CR2032纽扣电池
Umi协议，基于SIGBLEMesh
2.4GHzISMband
<7dBm
-20-55°C(-4-131°F)
Umi智能⽆线
LED遥控器 适用各类多通道机型
场景/分组功能
可调光/调色
  • Page 1 1
  • Page 2 2

RayRun BR03-CG User manual

Brand
RayRun
Model
BR03-CG
Type
User manual

RayRun BR03-CG is a multi-channel LED remote controller that allows you to control various lighting functions such as dimming, color changing, scene setting, and grouping. With its wireless connectivity, you can easily pair it with up to 5 receivers and control multiple lights simultaneously. The remote features a user-friendly interface with dedicated buttons for power, color adjustment, group selection, and scene control.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents