Eton 3ESEQ3000 User manual

Brand: Eton

Model: 3ESEQ3000

Type: User manual

FULL stainless steel R2 series

Hot dog Machine

User Manual

Model:ET-R2-5

Please read the introduction before using it

The full stainless steel hot-dog maker was designed and

manufactured according to the highest standards . It has many

valuable features including an innovative design, quality

construction,, convenient operation, and quick heating elements……

I. Specifications

Model

Voltage

Power( KW)

Temperature

Range

Rollers

Dimension

( mm)

ET-R2-5

110V

0.75

0℃ - 250℃ the

℃～

580X255X170

ET-R2-7

110V

1.05

0℃ - 250℃

th℃～

580X330X170

ET-R2-9

110V

1.35

0℃ - 250℃ the

℃～

580X405X170

ET-R2-1

110V

1.65

0℃ - 250℃ the

℃～

580X480X170

II. Transport and Storage

During the transport the hot dog roller should be handled with

care and should be protected against strong vibrations and

convulsions; the machine shouldn’t be stored outside. it should be

stored in a well-ventilated room.

III. Operating instructions

a.)Volt value of any equipment should coincide with volt of the hot

dog roller.

b.)Protector and main socket-outlet shall be near the machine.

c) The machine maybe installed and attached only by authorized

personnel.

IV. Hot Dog Roller Cover Assembly

a), Take the hot dog machine, Glass cover, and sideboards carefully

out of the carton. Please review the parts list of the hot dog roller

cover as follow to ensure you have all parts to complete

assembly.(Figure 1)

Figure 1

b), Place the plastic base onto the machine and fasten the screws ,and

then place one of glass panels into one set of plastic base. Repeat for

other side. (Figure 2)

Figure 2

c), Put the curved top glass into plastic base and put it down. on the

machine body, fasten the cover to machine with bolt on right

place.(Figure3)

Figure3

d),Set the front stainless plate onto the edge of the top glass, and

Tighten the front stainless plate to the glass with nuts and bolts.

(Figure 4)

Figure 4

V. Operation.

a) Before the first use please apply some vegetable oil onto the reels,

so that they can move around smoothly.

b)Turn on the power switch.

c) Depending on the amount and desired degree of browning .you

could regulate the temperature of the wheel unit with using the

buttons integrated on front panel .The temperature control lamp

lights up by the time you adjust a selected temperature. Once the

selected temperature is reached, the temperature control lamp

switches off automatically. If the temperature should be reduced

again. The temperature control lamp lights again. The temperature

will automatically be adjusted. In the view its modern construction

and efficient design the machine is highly economical and

energy-saving.

d) Turn off the power switch after you are done cooking..

VI. Cleaning and Maintenance

a)Before any maintenance and cleaning or cleaning work, the

machine should be switched off in order to prevent any damage and

injuries.

b) For cleaning ,please do not use any hard metallic objects. A soft

dry cloth or pieces made of wood are sufficient to prevent any

damage to surface.

Eton 3ESEQ3000 User manual

Eton 3ESEQ3000 User manual

Eton 3ESEQ3000 User manual

Other documents