Installation Notes
I. Accessories
①Door Panel (40*45cm/15.75*17.71in) ②Back Panel (40*45cm/15.75*17.71in)
③Side Panel(30*45cm/11.81*17.71in) ④Base Panel/Horizontal Board (30*40cm/11.81*15.75in)
⑤Small Hook ⑥Double-ended Small Hook ⑦Clip
Note: Please check the number of accessories before installation!
II. Installing Steps
1. Installing the Hooks
Attach hooks to the two side panels and the middle side panel. (30*45cm/11.81*17.71in as shown in
the yellow marking panel). (2 small hooks on each plate face the same way.)
①Side Panels on Both Sides ②Middle Side Panel
2. Installing the First Base Panels
Attach the round clips to the base plate (30*40cm/11.81*15.75in). The clips stand upright with the
round side facing the front or back.
3. Installing the Side Panels
Insert the side panels (30*45cm/11.81*17.71in) with hooks into the left and right side clips of the
base plate (the clips must be in place, and pay attention to the front and back.)