VEVOR ZIPLINE User manual

Brand: VEVOR

Model: ZIPLINE

Type: User manual

VEVOR ZIPLINE is an exciting outdoor adventure that lets you soar through the air on a thrilling ride. With a weight capacity of up to 330 lbs, it's perfect for adults and kids alike. Easy to set up between two trees or sturdy structures, the zipline provides hours of fun and entertainment. It includes a durable main cable, a sturdy trolley, a comfortable swing, and all the necessary hardware for secure installation. Unleash your adventurous spirit and create unforgettable memories with VEVOR ZIPLINE!

INSTRUCTION

MANUAL

Zipline Trolley

(OUTDOOR USE)

Ver.1

1. Always start from a secure and stable platform.

2. Always hold the trolley firmly with both hands (or hold on tight to the rope of the

monkey swing if applicable).

3. Release the trolley only when it has reached complete standstill, and feet can be

placed onto the ground/platform.

4. Always use the product under supervision of an adult.

5. Always check the structure, fixings, trolley, cable tensioners, cable spanner and cable

before using the zip wire.

6. Do not allow children under, next to or in the neighbourhood of the construction when

it is in use.

7. Do not wear loose fitting clothing (ponchos, scarfs…) when using the zip wire. This

can be dangerous because of entrapment risk.

8. Do not use the zip wire when the construction and the trolley are wet.

9. Only the KBT monkey seat with special D-shackle is permitted to be attached to the

trolley of the zip wire. The use of any other seats, ropes…. is considered as inappropriate

use and is deemed to be dangerous.

The frequency of inspection and maintenance will vary with the type of equipement or

materials used or other factors (e.g. heavy use, levels of vandalisme, coastal location, air

pollution, age of equipment, ...). All parts of the product need to be checked regularly by

the user to minimise the risk of accidents. Special attention should be paid to the cable

tensioners, cable spanner and trolley.

Routine visual inspection (weekly to monthly)

- Always check that the bolts and nuts are securely fastened.

- Check the shock absorbing surface for objects that don’t belong there.

- Check for missing parts.

- Check the equipment ground clearances.

Operational inspection (1 to 3 months)

- Check the stability of the construction.

- Check every part for excessive wair and remove when necessary.

Annual inspection (1 up to 2 times per year)

- Check for rust and corrosion.

- Check every part for excessive wair and remove when necessary.

GUIDLINES FOR USE

INSPECTION AND MAINTENANCE

In order to assemble the zip wire correctly and safely, the following height requirements

need to be followed. One end of the cable must be mounted at a higher level than the

other end. These heights are dependant on the height of the user and the distance

between the fixing points. In order to determine the right heights, the following steps

must be.

FOLLOWED:

Measure the height of the user. If there is more than one user, and the difference in

height is less than 15 cm, use the height of the tallest user. If the difference is more

than 15 cm, the zip wire needs to be adjusted every time the user’s height is outside

the specified range.

Add 75 cm to the measured height of the user and mark this point on the tree or

construction frame.

Measure the distance between the 2 fixing points. Determine the corresponding

height in the following table and mark this height on the tree / construction at the

other side.

01.

02.

03.

Height

user

Height highest fixing point according to the following distances

between the 2 fixing points (y)

Height lowest

fixing point (x)

18,5m

2,6m

2,75m

2,9m

3,2m

15,5m

2,45m

2,6m

2,75m

2,9m

12,5m

2,3m

2,45m

2,6m

2,75m

2,9m

21,5m

2,75m

2,9m

3,2m

3,35m

1,2m

1,4m

1,5m

1,7m

1,8m

HIGHEST

2,1m

2,3m

2,45m

2,6m

24,5m

2,9m

3,2m

3,35m

3,5m

INSTRUCTIONS FOR CABLE HEIGHT

MINIMUM

RIGHT

WRONG

4 5

Y-TYPE

SOCKET KEY

TOOLS REQUIRED

OPTIONAL ACCESSORIES

HARDWARE

TURNBUCKLE ×1 PC SWING ×1 PC

CABLE SLING ×1 PC

L-T YP E S O CKE T

WRENCH M8/M10/M12

×1 PC

THE NEUTRAL MANUAL FOR THE ALL SPARE PARTS, IT DOESN'T MEAN THAT THE ITEM INCLUDES ALL THE

ACCESSORIES. IT JUST DEPENDS ON WHICH SET YOU CHOOSE.

U CLAMPS

×3 PCS

ZIPLINE TROLLEY ×1 PC

MAIN CABLE ×1 PC

ABC

WRENCH M13

×1 PC

330 LBS

CAPACITY

(COMBINED)

2 PERSON

ASSEMBLY

APPROXIMATELY

30 MIN.

ASSEMBLY

SPRING BRAKE

×1 PC

THICK GLOVES

Recommend to wear

thick gloves when

assembling (Not included).

1Wrap the cable sling around the tree.Pass the looped ends of the cables-

ling through the turnbuckle.Use M13 wrenche to fix one end and use

Y-type socket key M12 to tighten theturnbuckle's screws. Both ends are

fixed in the same way

2Pass the main cable through the zipline trolley and spring brake.

PRODUCT ASSEMBLY

AM12

M13 B

53THE NEUTRAL MANUAL FOR THE ALL SPARE

PARTS, IT DOESN'T MEAN THAT THE ITEM

INCLUDES ALL THE ACCESSORIES. IT JUST

DEPENDS ON WHICH SET YOU CHOOSE.

3Wrap the main cable around the another tree.Fix the main cable with

U-clamps.Tighten the screws of the U-clamps with Y-type socket key M8.

At least three U-clamps(the more the better) are required for fixing the main cable.

4Open the lock under the zip line trolley and

install the swing on the lock.

5Tighten the turnbuckle as shown in the figure to keep the main cable straight.

PRODUCT ASSEMBLY

1. Please keep this instruction sheet safely for future reference, and ensure that you

review it with all users.

2. Inappropriate use or faulty application of the product is explicitly forbidden and

absolves the manufacturer of all liability.

3. The use of the item is allowed only under continuous supervision by an adult. The

product is only intended for use as a zip wire between two points, for 1 user older than 8

years and with a maximum weight of up to 150 kg.

4. The zip wire should only be used after it has been properly installed according to the

following guidelines.

5. The application of the item as part of a play frame or any other construction will have

to be such that it excludes all risk of entrapment.

6. When mounting or assembling the product, attention should be given to the minimum

required distance between the product and eventual obstacles: walls, fencing, … This

distance should be a minimum of 2 metres.

7. In this safety area no hard, angular or pointed objects should be present. The surface

underneath the product should be flat and shock absorbing. The product must not be

placed on tarmac, concrete or any other hard surface. We advise the removal and

storage of all accessories during winter because the characteristics of the soil (when

frozen) are not suitable for safe play.

8. Please ensure that the tree, branch or construction to which the zip wire is attached, is

able to support a weight of 300 kg.

Adult assembly and supervision required.

This product should be unpacked and assembled by an adult,including

site and tree selection.

In unassembled state, it contains potentially hazardous small objects,

please keep out of children's reach.

Max User Weight 150kg

User Age 3+

Make sure overhead can support 300kg

WARNING

INSTRUCTIONS FOR USE

VEVOR ZIPLINE User manual

VEVOR ZIPLINE User manual

Other documents