Crystorama 718-OB-CL-S User manual

Crystorama
Brand
Crystorama
Model
718-OB-CL-S
Type
User manual

Crystorama 718-OB-CL-S is a 42-light chandelier with a classic design and oil-rubbed bronze finish. It requires 4 candelabra base bulbs (40W recommended, 60W max) and is compatible with LED bulbs for extended use. The fixture is dry rated and suitable for indoor use only. Installation involves assembling the mounting bar, frame, stem, tubes, and crystals, followed by attaching the vase cap and finial. Please consult the assembly instructions for detailed steps and safety precautions.

Crystorama 718-OB-CL-S is a 42-light chandelier with a classic design and oil-rubbed bronze finish. It requires 4 candelabra base bulbs (40W recommended, 60W max) and is compatible with LED bulbs for extended use. The fixture is dry rated and suitable for indoor use only. Installation involves assembling the mounting bar, frame, stem, tubes, and crystals, followed by attaching the vase cap and finial. Please consult the assembly instructions for detailed steps and safety precautions.

ASSEMBLY INSTRUCTION MODEL #718-OB-CL-S
LIGHTING THE WAY FOR SIXTY YEARS
WARNING:
Electrical Danger
Turn Power Off
You will need 4- Candelabra Base Bulb
40 Watts recommended 60 Watts Max.
USE LED BULBS FOR EXTENDED USE
All electrical components must be
installed by a licensed electrician
in accordance with the National
Electric Code and the appropriate
local electrical codes
The fixture is Dry rated
WARNING:This product can expose you to Lead,
which is known to the State of California to cause cancer
and/or birth defects or reproductive harm.For more
information go to www.p65warnings.ca.gov
HOW TO INSTALL:
Place the fixture parts on a soft
cloth-covered platform before
installation of fixture.
1. Install the mounting bar onto the
outlet box.
5. Dress the crystals as illustrated.
Crystorama.com
2. Raise the Frame up over the threaded nipple
on the mounting bar.
After the wire connection is completed,
Secure with the coupling.
3. Screw the stem onto the coupling
on the frame and secure with a hex nut.
Slide the smaller tube, check ring ,
metal ring, check ring, lager tube
and check ring in that order over the
stem.
Secure with a hex nut.
4. Place the vase cap over the end of the
stem and secure with the finial.
A.
Crystal Sets
B.
42Sets. (1)30mm + (1)28mm + (1)24mm + (1)22mm
+ (1)20mm + (1)16mm + (1)14mm
21Sets. (1)28mm + (1)24mm + (1)22mm + (1)16mm
+(1)14mm
ASSEMBLY INSTRUCTION MODEL #718-OB-CL-S
LIGHTING THE WAY FOR SIXTY YEARS
Part Number
Part Numbers
O. (1)-Vase Cap ; Ø3" ; 21 pin holes-XSN718OBCAP
P. (1)-Finial-XSN718OBFIN
Crystorama.com
Outlet Box
A
D
BC
E
F
J
G
L
G
N
G
M
G
O
P
H
I
I
K
A. (2)-Wire Connector
B. (1)-Mounting bar
C. (2)-Screw
D. (1)-Hex nut
E. (1)-Thread nipple
F. (1)-Frame ; Ø18" ; 42 pin holes ; with inner
plate.
G. (4)-Check ring
H. (1)-Coupling
I. (2)-Hex Nut
J. (4)-Socket
K. (1)-Stem ; H10"-XSN718OBSTEM10IN
L. (1)-Tube ; H4 1/8"-XSN718OBSTEM4.125IN
M. (1)-Tube ; H5"-XSN718OBSTEM5IN
N. (1)-Metal ring ; Ø9" ; 42 pin holes for up side ;
21 pin holes for lower side.
42 pin holes
21 pin holes
  • Page 1 1
  • Page 2 2

Crystorama 718-OB-CL-S User manual

Crystorama
Brand
Crystorama
Model
718-OB-CL-S
Type
User manual

Crystorama 718-OB-CL-S is a 42-light chandelier with a classic design and oil-rubbed bronze finish. It requires 4 candelabra base bulbs (40W recommended, 60W max) and is compatible with LED bulbs for extended use. The fixture is dry rated and suitable for indoor use only. Installation involves assembling the mounting bar, frame, stem, tubes, and crystals, followed by attaching the vase cap and finial. Please consult the assembly instructions for detailed steps and safety precautions.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers