2. Modern Flames
  3. OTK-OR30-LG
OTK-OR30-LG

Modern Flames OTK-OR30-LG Installation guide

  • Hello! I have reviewed the installation instructions for the Orion Traditional optional surround. The document details the steps for removing the fireplace trim and installing the new surround, including diagrams and tool specifications. I am ready to answer your questions about the process.
  • How many screws should be removed from the perimeter of the fireplace when removing trim?
    What type of screwdriver is required to remove the screws?
    Where should the fireplace be positioned for ease of trim and surround installation?
877-246-9353 • customerservice@modernflames.com • modernflames.com
Orion® Traditional optional surround installation instructions
Remove the existing Orion® Traditional trim
Front
1Step 1 - From the rear of the
fireplace, remove 8 phillips
head screws from perimeter.
Use a P2 phillips head
screwdriver.
(Save screws for reuse)
For ease of trim removal and surround install,
lay fireplace on its back surface.
Back view of unit
06/2023
877-246-9353 • customerservice@modernflames.com • modernflames.com
Install the new Orion® Traditional optional surround
TOP
S
I
D
E
S
I
D
E
For ease of surround removal and install, lay fireplace on its back surface.
If thin surround on bottom
is desired, attach as noted
Front view of unit Back view of unit
Back view of unit
2Step 2 - Put the surround kit
face down on a soft towel or
cloth. Install both side
surround pieces to the top
surround piece using supplied
screw.
4Step 4 - Install
surround assembly
to fireplace using
screws from step 1
(8 screws total).
NOTE: Surrond installs inside
viewing area.
3Step 3 - Install bottom
surround to the two side
pieces using supplied screws.
3 3
2 2
/