Modern Flames OTK-OR30-LG Installation guide

877-246-9353 • customerservice@modernﬂames.com • modernﬂames.com

Orion® Traditional optional surround installation instructions

Remove the existing Orion® Traditional trim

Front

1Step 1 - From the rear of the

ﬁreplace, remove 8 phillips

head screws from perimeter.

Use a P2 phillips head

screwdriver.

(Save screws for reuse)

For ease of trim removal and surround install,

lay ﬁreplace on its back surface.

Back view of unit

06/2023

877-246-9353 • customerservice@modernﬂames.com • modernﬂames.com

Install the new Orion® Traditional optional surround

TOP

For ease of surround removal and install, lay ﬁreplace on its back surface.

If thin surround on bottom

is desired, attach as noted

Front view of unit Back view of unit

Back view of unit

2Step 2 - Put the surround kit

face down on a soft towel or

cloth. Install both side

surround pieces to the top

surround piece using supplied

screw.

4Step 4 - Install

surround assembly

to ﬁreplace using

screws from step 1

(8 screws total).

NOTE: Surrond installs inside

viewing area.

3Step 3 - Install bottom

surround to the two side

pieces using supplied screws.

3 3

2 2