2. Fisher & Paykel
  3. DD60SI9
DD60SI9

Fisher & Paykel DD60SI9 User guide

  • Hello, I'm a chat assistant who has read the Fisher & Paykel Specification Guide for the Series 9 DishDrawer dishwashers, models DD60SI9 and DD60SHI9. This document outlines the features of the compact, integrated dishwasher, including its six wash programs, flexible racking, and soft-close mechanism. I'm ready to answer any questions you may have about these dishwashers.
  • What are the available wash programs?
    What additional wash options are available?
    Can the racking be adjusted for larger dishes?
SPECIFICATION GUIDE INTEGRATED SINGLE DISHDRAWER™ DISHWASHER, SANTISE
SERIES 9, INTERGRATED STYLE
Date: 22.07.2021 | The models shown in this Specification Guide (SG) may not be available in all markets and are subject to change at any time. Product specifications may vary from those shown. This
SG should not be used as installation guidance for any product. Further information is required to safely and correctly install the products featured here. Specific installation guidance will be available
with the product on delivery and on our website fisherpaykel.com
OVERVIEW
A compact size to fit anywhere, room to wash a half load
and less bending.
MODELS
Integrated Single DishDrawer™ Dishwasher, Sanitise
Panel Ready
DD60SI9
Integrated Single DishDrawer™ Dishwasher, Sanitise
Panel Ready
DD60SHI9
SERIES & STYLE
Series 9
Integrated Style
FEATURES
1Customize with your own kitchen cabinetry or
purchase our stainless steel door panel accessory
2Six wash program, from delicate to heavy to suit any
load
3Additional Quick wash, Sanitise and Extra Dry
options
4 Can be positioned at bench height, for easy of
loading and minimal bending.
5Flexible racking can be folded down to fit bigger
dishes
6Spray arm sensing, for a more reliable wash
7With soft-close mechanism and knock-to-pause
function
ACCESORIES
1Optional contemporary square handle kit
2Optional contemporary round handle kit
3Optional stainless steel door kit
4Cutlery basket
5Knife clip and multipurpose clip
SPECIFICATION GUIDE INTEGRATED SINGLE DISHDRAWER™ DISHWASHER, SANTISE
SERIES 9, INTERGRATED STYLE
Date: 22.07.2021 | The models shown in this Specification Guide (SG) may not be available in all markets and are subject to change at any time. Product specifications may vary from those shown. This
SG should not be used as installation guidance for any product. Further information is required to safely and correctly install the products featured here. Specific installation guidance will be available
with the product on delivery and on our website fisherpaykel.com
PRODUCT DIMENSIONS
mm
A Overall height of chassis* 410
B Overall width of chassis* 599
C Overall depthof chassis* 553
D Minimum height of custom front panel 408
E Width of custom front panel 596 - 615
F Depth of custom front panel 16 - 20
G Height of gap below front panel min 2
H Depth of open drawer 527
*Does not include custom front panel
CAVITY DIMENSIONS: STANDARD INSTALLATION
mm
A Overall height min 412
B Overall width 600
C Minimum overall depth of cavity* 579
*Assumes a door panel thickness of 19mm
SPECIFICATIONS
Model No. DD60SI9, DD60SHI9
Dimensions H 454mm x W 599mm x D 571mm
Electrical
Supply 220 240V, 50Hz
Service 4.2A
Receptacle 3 pin earthing-type
Plumbing
Supply 3/4“ BSP (GB20) to suit flat washer
Pressure
Water softener models: max. 1 MPa (145 psi), min.
0.1 MPa (14.5 psi)
Non-water softener models: max. 1 MPa (145 psi),
min. 0.03 MPa (4.3 psi)
ISO VIEW PROFILE VIEW ISO VIEW
PLUMBING AND ELECTRICAL
ISO VIEWREAR VIEW
Service outlet at rear extends both sides, hoses and cords can be routed to either or both sides
a
b
c
a
bc
d
e
f
h
g
62
67
/