SANDELIER Wall Mount User guide

Wall Mount
Brand
SANDELIER
Model
Wall Mount
Type
User guide

SANDELIER Wall Mount allows you to create mesmerizing patterns with flowing sand, providing a tranquil and ever-changing display for your home or office. Each flip of the device generates unique, unrepeatable patterns due to its innovative design. Simply adjust the air level using the provided injector and needle to control the flow rate of the sand, creating dynamic and visually captivating displays.

SANDELIER Wall Mount allows you to create mesmerizing patterns with flowing sand, providing a tranquil and ever-changing display for your home or office. Each flip of the device generates unique, unrepeatable patterns due to its innovative design. Simply adjust the air level using the provided injector and needle to control the flow rate of the sand, creating dynamic and visually captivating displays.

The Journey Begins
www.sandelier.com contact@sandelier.com Sandelier sandelier_off
To the Sandelier family! You have now made your rst step into a wonderful
and neverending journey that will soothe your soul and ignite your curiosity. Let
your mind escape through the continuous cascade of owing sand and enjoy the
paradoxical tranquility of nature’s chaos as you gaze at your Sandelier.
But rst, you will have to learn how to make the best out of your art piece and
create mesmerizing patterns every day.
Every time you ip your Sandelier around, it will create new shapes that have never been
created before, and will never be created again. Do not expect to get the same patterns
every time. When you reset your Sandelier, make sure the layer of air bubbles is dispersed
evenly across the whole piece so that the sand will slowly fall in between these bubbles.
The amount of air in your Sandelier will determine how fast the sand ows and therefore
what shapes you create.
Too much air will cause the sand to stay above the bubbles without nding its way through.
Not enough air will make the sand fall rapidly at the bottom.
How to use your Sandelier
The Journey Begins
To change the amount of air in your Sandelier, simply use any injector with a 27 Ga needle
(not included for safety and legal reasons).
Find the whole on the frame of your Sandelier and insert the needle. This way, you can add or
remove small amounts of air until you get the desired quantity.
The air level will usually be right when you receive your Sandelier. Only regulate it if you feel
like the sand is not owing at the right speed no matter how you ip it around.
Maintenance
Over time, water can evaporate from your Sandelier. The regulation hole on the frame
allows you to add small amounts of water to keep your Sandelier brand new over the years.
Maintenance is only recommended once or twice a year.
Precautions
Do not ever remove water from your Sandelier. Only regulate the air when
needed, and add some water when needed.
Do not add too much water at once as the pressure could break the glass.
Do not leave your Sandelier near a child unattended.
Frequently Asked Questions
If you have any other question, you can visit our FAQ and download our
detailed user’s guide on our website sandelier.com.
You can reach out to us on our Facebook page, Instagram page, or by email.
We will be more than happy to assist you!
How to Regulate Air
www.sandelier.com contact@sandelier.com Sandelier sandelier_off
  • Page 1 1
  • Page 2 2

SANDELIER Wall Mount User guide

Wall Mount
Brand
SANDELIER
Model
Wall Mount
Type
User guide

SANDELIER Wall Mount allows you to create mesmerizing patterns with flowing sand, providing a tranquil and ever-changing display for your home or office. Each flip of the device generates unique, unrepeatable patterns due to its innovative design. Simply adjust the air level using the provided injector and needle to control the flow rate of the sand, creating dynamic and visually captivating displays.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents