Panasonic SCBTT885EG Owner's manual

Brand: Panasonic

Model: SCBTT885EG

Category: Blu-Ray players

Type: Owner's manual

This manual is also suitable for

VQT5F69-2

until

2014/05/24

Owner’s Manual

Blu-ray Disc

Home Theater Sound System

Model No. SC-BTT885

SC-BTT865

SC-BTT505

Unless otherwise indicated, illustrations in these operating instructions are of SC-BTT885.

Thank you for purchasing this product.

Please read these instructions carefully before using this product, and save this manual for future use.

Firmware updates

Panasonic is constantly improving the unit’s firmware to ensure that our

customers are enjoying the latest technology.

Panasonic recommends updating your firmware as soon as you are

notified.

For details, refer to “Firmware updates” (> 15) or

http://panasonic.jp/support/global/cs/ (This site is in English only.)

SC-BTT885&865&505EG-VQT5F69_mst.book 1 ページ２０１４年３月１９日　水曜日　午後５時２５分

- 2 -

Precautions

Unit

To reduce the risk of fire, electric shock or product damage,

≥ Do not expose this unit to rain, moisture, dripping or splashing.

≥

Do not place objects filled with liquids, such as vases, on this unit.

≥ Use only the recommended accessories.

≥ Do not remove covers.

≥ Do not repair this unit by yourself. Refer servicing to qualified

service personnel.

≥ Do not let metal objects fall inside this unit.

≥ Do not place heavy items on this unit.

AC mains lead

To reduce the risk of fire, electric shock or product damage,

≥ Ensure that the power supply voltage corresponds to the

voltage printed on this unit.

≥ Insert the mains plug fully into the socket outlet.

≥ Do not pull, bend, or place heavy items on the lead.

≥ Do not handle the plug with wet hands.

≥ Hold onto the mains plug body when disconnecting the plug.

≥ Do not use a damaged mains plug or socket outlet.

The mains plug is the disconnecting device.

Install this unit so that the mains plug can be unplugged from the

socket outlet immediately.

Speaker

To prevent injury, this apparatus must be securely attached to the

wall in accordance with the installation instructions.

Small object

≥ Keep the screws out of reach of children to prevent swallowing.

Unit

≥ This unit utilizes a laser. Use of controls or adjustments or

performance of procedures other than those specified herein

may result in hazardous radiation exposure.

≥ Do not place sources of naked flames, such as lighted candles,

on this unit.

≥ This unit may receive radio interference caused by mobile

telephones during use. If such interference occurs, please

increase separation between this unit and the mobile

telephone.

≥ This unit is intended for use in moderate climates.

Placement

Place this unit on an even surface.

To reduce the risk of fire, electric shock or product damage,

≥ Do not install or place this unit in a bookcase, built-in cabinet or

in another confined space. Ensure this unit is well ventilated.

≥ Do not obstruct this unit’s ventilation openings with

newspapers, tablecloths, curtains, and similar items.

≥ Do not expose this unit to direct sunlight, high temperatures,

high humidity, and excessive vibration.

Speaker

≥

Use only supplied speakers

The main unit and supplied speakers are to be used only as

indicated in these operating instructions. Failure to do so may lead

to damage to the amplifier and/or the speakers, and may result in

the risk of fire. Consult a qualified service person if damage has

occurred or if you experience a sudden change in performance.

≥ Be careful not to cross (short-circuit) or reverse the polarity of

the speaker wires as doing so may damage the speakers.

≥ Hold the speaker firmly to avoid injury by dropping the speaker

when carrying.

≥ You can damage your speakers and shorten their useful life if

you play sound at high levels over extended periods.

≥ Do not touch the front area of the speakers. Hold by the sides.

≥ Place speakers on flat, secure surfaces.

≥ To avoid injury by falling or dropping the speaker, place the

speaker cables with care not to stumble or hook.

≥

Do not stand on the speaker. Be cautious when children are near.

Batteries

Mishandling of batteries can cause electrolyte leakage and may

cause a fire.

≥ Danger of explosion if battery is incorrectly replaced. Replace

only with the type recommended by the manufacturer.

≥ When disposing of the batteries, please contact your local

authorities or dealer and ask for the correct method of disposal.

≥

Do not mix old and new batteries or different types at the same time.

≥ Do not heat or expose to flame.

≥ Do not leave the battery(ies) in a car exposed to direct sunlight

for a long period of time with doors and windows closed.

≥ Do not take apart or short circuit.

≥ Do not recharge alkaline or manganese batteries.

≥ Do not use batteries if the covering has been peeled off.

Remove batteries if you do not intend to use the remote control for

a long period of time. Store in a cool, dark place.

WARNING

CAUTION

SC-BTT885&865&505EG-VQT5F69_mst.book 2 ページ２０１４年２月１８日　火曜日　午後３時２４分

- 3 -

The following limits are in place regarding the usage of this unit.

You must be aware of these limits before using this unit.

Panasonic will in no way be responsible for any incidental damage

which may arise due to a failure to obey these limits, or to any

condition of use or disuse of this unit.

≥ Data transmitted and received over radio waves may be

intercepted and monitored.

≥ This unit contains delicate electronic components.

Please use this unit in the manner in which it was intended and

follow the following points:

– Do not expose this unit to high temperatures or direct

sunlight.

– Do not bend, or subject this unit to strong impacts.

– Keep this unit away from moisture.

– Do not disassemble or alter this unit in any way.

This product is intended for general consumer. (Category 3)

The WLAN feature of this product shall exclusively be used inside

buildings.

This product on purpose to connect to access point of 2.4 GHz or

5GHz WLAN.

The unit may keep the user settings information in the unit. If you

discard this unit either by disposal or transfer, then follow the

procedure to return all the settings to the factory presets to delete

the user settings. (> 38, "To return all settings to the factory

preset.")

≥

The operation history may be recorded in the memory of this unit.

Disposal of Old Equipment and Batteries

Only for European Union and countries with recycling

systems

These symbols on the products, packaging, and/or

accompanying documents mean that used electrical

and electronic products and batteries must not be

mixed with general household waste.

For proper treatment, recovery and recycling of old

products and used batteries, please take them to

applicable collection points in accordance with your

national legislation.

By disposing of them correctly, you will help to save

valuable resources and prevent any potential

negative effects on human health and the

environment.

For more information about collection and recycling,

please contact your local municipality.

Penalties may be applicable for incorrect disposal of

this waste, in accordance with national legislation.

Note for the battery symbol (bottom symbol):

This symbol might be used in combination with a

chemical symbol. In this case it complies with the

requirement set by the Directive for the chemical

involved.

This unit adopts the following technology for copyright protection.

Cinavia Notice

This product uses Cinavia technology to limit the use of unauthorized

copies of some commercially-produced film and videos and their

soundtracks. When a prohibited use of an unauthorized copy is

detected, a message will be displayed and playback or copying will be

interrupted.

More information about Cinavia technology is provided at the Cinavia

Online Consumer Information Center at http://www.cinavia.com. To

request additional information about Cinavia by mail, send a postcard

with your mailing address to:

Cinavia Consumer Information Center, P.O. Box 86851, San Diego,

CA, 92138, USA.

Wireless LAN connection

Declaration of Conformity (DoC)

Hereby, “Panasonic Corporation” declares that this product is in

compliance with the essential requirements and other relevant

provisions of Directive 1999/5/EC.

Customers can download a copy of the original DoC to our

R&TTE products from our DoC server:

http://www.doc.panasonic.de

Contact to Authorized Representative:

Panasonic Marketing Europe GmbH, Panasonic Testing

Centre, Winsbergring 15, 22525 Hamburg, Germany

This product is intended to be used in the following countries:

AT, BE, BG, CH, CY, CZ, DE, DK, ES, FI, FR, GB, GR, HU, HR,

IE, IS, IT, LU, MT, NL, NO, PL, PT, RO, SE, SI, SK, TR

To dispose or transfer this unit

Restriction on use of

unauthorized copied content

SC-BTT885&865&505EG-VQT5F69_mst.book 3 ページ２０１４年２月１８日　火曜日　午後３時２４分

- 4 -

Table of contents

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Getting started

Package contents and accessories . . . . . . . . 5

Unit and media care . . . . . . . . . . . . . . . . . . . . 6

Playable media. . . . . . . . . . . . . . . . . . . . . . . . 7

Control reference guide . . . . . . . . . . . . . . . . . 9

Setting up the system. . . . . . . . . . . . . . . . . . 11

Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Inserting or removing media. . . . . . . . . . . . . 15

Enjoying TV with the speakers of the

system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

HOME menu . . . . . . . . . . . . . . . . . . . . . . . . 16

Multi User Mode . . . . . . . . . . . . . . . . . . . . . . 17

Playback

Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Using the iPod/iPhone . . . . . . . . . . . . . . . . . 20

Enjoying Bluetooth

. . . . . . . . . . . . . . . . . . . 21

TV & Radio

“HDMI CEC” . . . . . . . . . . . . . . . . . . . . . . . . . 23

Listening to the Radio . . . . . . . . . . . . . . . . . 24

Advanced operations

Enjoying Network Service . . . . . . . . . . . . . . 25

Home Network feature . . . . . . . . . . . . . . . . . 26

Option menu. . . . . . . . . . . . . . . . . . . . . . . . . 27

Setup menu . . . . . . . . . . . . . . . . . . . . . . . . . 30

Speaker installation option . . . . . . . . . . . . . . 36

Reference

Troubleshooting guide . . . . . . . . . . . . . . . . . 38

Specifications . . . . . . . . . . . . . . . . . . . . . . . . 43

SC-BTT885&865&505EG-VQT5F69_mst.book 4 ページ２０１４年２月１８日　火曜日　午後３時２４分

Getting started

- 5 -

Getting started

Package contents and accessories

Check the package contents and supplied accessories before using this unit.

Package contents

(SA-BTT885)

(SA-BTT505)(SA-BTT865)

FRONT

(SB-HFS5810)

SURROUND

(SB-HFS5810)

FRONT

(SB-HFS5810)

SURROUND

(SB-HFS5310)

FRONT

(SB-HFS5310)

SURROUND

(SB-HFS5310)

(SH-FX82) (SH-FX82)

SUBWOOFER

(SB-HW8010)

CENTER

(SB-HC5810)

SUBWOOFER

(SB-HW8010)

CENTER

(SB-HC5810)

SUBWOOFER

(SB-HW8010)

CENTER

(SB-HC5810)

Main unit

(Stands)

(Speakers)

(Bases)

(Screws)

Main unit

Wireless system

(Speakers) (Speakers)

(Stands)

(Bases)

(Screws) (Screws)

(Stands)

Wireless system

(Speaker cables) (Speaker cables)

(Bottom covers) (Bottom covers)

(Speaker cables)

(Bottom covers)

(Speaker cables) (Speaker cables)

SC-BTT885&865&505EG-VQT5F69_mst.book 5 ページ２０１４年２月１８日　火曜日　午後３時２４分

Getting started

- 6 -

∏ 1 Remote control

(N2QAYB000971)

∏ 2 Batteries for remote control

∏ [BTT885] [BTT865] 2 AC mains leads

[BTT505] 1 AC mains lead

∏ 1 FM indoor antenna

∏ 2 Sheets of speaker cable sticker

∏ 1 CD-ROM



≥ Product numbers provided in these operating instructions

are correct as of February 2014. These may be subject to

change.

≥ Do not use AC mains lead with other equipment.

Unit and media care

∫ Clean this unit with a soft, dry cloth

≥ Never use alcohol, paint thinner or benzine to

clean this unit.

≥ Before using chemically treated cloth, carefully

read the instructions that came with the cloth.

∫ This unit’s lens

∫ Clean discs

Wipe with a damp cloth and then wipe dry with a

dry cloth.

∫ Disc handling precautions

≥ Handle discs by the edges to avoid inadvertent

scratches or fingerprints on the disc.

≥ Do not attach labels or stickers to discs.

≥ Do not use disc cleaning sprays, benzine,

thinner, static electricity prevention liquids or

any other solvent.

≥ Do not use the following discs:

– Discs with exposed adhesive from removed

stickers or labels (rented discs, etc.).

– Discs that are badly warped or cracked.

– Irregularly shaped discs, such as heart

shapes.

Accessories

Lens cleaner: RP-CL720AE

≥ This lens cleaner may not be available for

sale in all countries, e.g. not available in

Germany, please consult your Panasonic

dealer for advice.

≥ This lens cleaner is sold as specific for DIGA,

but can be used on this unit as well.

DO DO NOT

SC-BTT885&865&505EG-VQT5F69_mst.book 6 ページ２０１４年２月１８日　火曜日　午後３時２４分

Getting started

- 7 -

Playable media

≥ See pages 8 and 45 for more information on the types of content that can be played.

Device Media markings Device types Contents format

BD-Video Video

BD-RE Video, JPEG, MPO

BD-R Video, MKV, Xvid

DVD-Video Video

DVD-R

Video, AVCHD, MKV,

Xvid, JPEG, MPO,

AAC, FLAC, MP3,

WAV, WMA

DVD-R DL

DVD-RW

Video, AVCHD

—

+R/+RW/+R DL

Music CD Music [CD-DA]

—

CD-R

CD-RW

MKV, Xvid, JPEG,

MPO, AAC, FLAC,

MP3, Music [CD-DA],

WAV, WMA

—

USB devices

(up to 2 TB)

MKV, MP4, MPEG2,

Xvid, JPEG, MPO,

AAC, FLAC, MP3,

WAV, WMA

DVD

USB

SC-BTT885&865&505EG-VQT5F69_mst.book 7 ページ２０１４年２月１８日　火曜日　午後３時２４分

Getting started

- 8 -

∫ Types of discs that cannot be played

by this unit

Any other disc that is not specifically

supported or previously described.

≥ DVD-RAM

≥ Super Audio CD

≥ Photo CD

≥ DVD-Audio

≥ Video CD and Super Video CD

≥ HD DVD

∫ Region management information

The unit can playback BD-Video/DVD-Video discs

of the following regions codes, including “ALL”:

∫ Finalize

Any DVD-R/RW/R DL, +R/+RW/+R DL and

CD-R/RW that are recorded by a recorder need to

be finalized by the recorder to play on this unit.

Please refer to the recorder’s instructions.

∫ BD-Video

This unit supports high bit rate audio (Dolby

Digital Plus, Dolby

TrueHD, DTS-HD High

Resolution Audio

and DTS-HD Master Audio

)

adopted in BD-Video.

∫ 3D

≥ 3D videos and 3D still pictures can be played

back when this unit is connected to a 3D

compatible TV using a High Speed HDMI

Cable.

≥ 2D video can be enjoyed as 3D virtually. (> 29)

∫ Music CD

Operation and sound quality of CDs that do not

comply with CD-DA specifications (copy control

CDs, etc.) cannot be guaranteed to work.

∫ USB device

≥ This unit does not guarantee connection with all

USB devices.

≥ This unit does not support USB device

charging.

≥ FAT16, FAT32, and NTFS file systems are

supported.

≥ This unit supports USB2.0 High Speed.

≥ This unit supports an HDD formatted in FAT32

and NTFS. If the HDD is not recognized, the

power to the HDD may not be supplied. Supply

power from an external source.

∫ BD-RE, BD-R

Discs recorded in DR mode using Panasonic

Blu-ray Disc recorders may not play back the

audio etc., correctly.



≥ It may not be possible to play the above media in some

cases due to the type of media, the condition of the

recording, the recording method, and how the files were

created.

≥ The producers of the disc can control how discs are

played, so you may not always be able to control play as

described in these operating instructions. Read the disc’s

instructions carefully.

Example:

BD-Video DVD-Video

SC-BTT885&865&505EG-VQT5F69_mst.book 8 ページ２０１４年２月１８日　火曜日　午後３時２４分

Getting started

- 9 -

Control reference guide

∫ Using the remote control

Insert the batteries to the terminal so that it (i

and j) matches those in the remote control.

Point it at the remote control signal sensor on this

unit. (> 10)

1 Turn the unit on and off

2 Select title numbers, etc./Enter numbers or

characters

3 Cancel

4 Select Bluetooth

/Enable pairing (> 21)

5 Select an audio or video source

6 Basic playback control buttons (> 18)

7 Select preset radio stations (> 24)

8 Show the status messages (> 18)

9 Show the Home Screen of the Network

Service (> 25)

10 [

] : Move the highlight for selection

[OK] : Confirm the selection

(

) : Frame-by-frame (

18)

11 Show Option menu (> 27)

12 Coloured buttons (red, green, yellow, blue)

Used for various purposes depending on the

display

13 Set the sound effects (> 29)

14 Set the sleep timer

1 Press [SLEEP].

2 While “SLEEP ££” is displayed on the

unit’s display, press [SLEEP] several

times to select the time (in minutes).

≥ Timer selection is up to 120 minutes.

≥ Select “OFF” on the unit’s display to disable

the function.

≥ To confirm the remaining time

Press the button again.

15 TV operation buttons

[Í TV]: Turn the TV on and off

[AV, INPUT]: Switch the input select

[ijVOL] : Adjust the volume

16 Adjust the volume of the main unit

17 Change audio (> 18)

18 Mute the sound

≥ “MUTE” flashes on the unit’s display, while

the function is on.

≥ To cancel, press the button again or adjust

the volume.

≥ Muting is cancelled if the unit is turned off.

19 Switch Secondary Video on/off

(Picture-in-picture) (> 28)

20 Select radio stations manually (> 24)

21 Exit the Menu screen

22 Show HOME menu (> 16)

23 Show Pop-up Menu/Top Menu (> 18)

24 Return to previous screen

25 Show Miracast

screen (> 26)

26 Show Setup menu (> 30)

Remote control

モヷ

ヴヵヰヱ

リワヱヶヵ

ユヹリヵ

モヶュリヰ

ヴユロユヤヵヰン

ヴレリヱ

ヱロモヺ

ヱモヶヴユ

ヴユモンヤラヴユモンヤラ

ヴロヰヸ

ヴレリヱ

ラ

ヰ

ヮ

ユ

ンユヵヶンワ

ヱ

ヰ

ヱ

ノ

ヶ

ヱ

チ

ヮ

ユ

ワ

ヶ

チ

リ

ワ

ヵ

ユ

ン

ワ

ユ

ヵ

ヱリヱ

ヵ

ヰ

ヱ

チ

ヮ

ユ

ワ

ヶ



R6/LR6, AA



(Alkaline or manganese

batteries)

SC-BTT885&865&505EG-VQT5F69_mst.book 9 ページ２０１４年２月１８日　火曜日　午後３時２４分

Getting started

- 10 -

1 Disc tray

2 USB port (> 15, 20)

3 Remote control signal sensor

Distance: Within approx. 7 m.

Angle: Approx. 20

up and down, 30

left and right

4 Display

5 Stop (> 18)

6 Start play (> 18)

7 Open or close the disc tray (> 15)

8 Adjust the volume of the main unit

9 Standby/on switch (Í/I) (> 14)

Touch to switch the unit from on to standby

mode or vice versa. In standby mode, the unit

is still consuming a small amount of power.

10 NFC touch area (> 22)

1 AC IN terminal

2 Speaker terminals

3 Cooling fan

4 LAN port (> 13)

5 USB port (> 15)

6 DIGITAL AUDIO IN terminal

7 HDMI1 IN terminal (> 12)

8 HDMI2 IN terminal (> 12)

9 HDMI AV OUT (ARC) terminal

10 AUX terminal

11 FM radio antenna terminal

Main unit (Front)

12 6453

897 10

Main unit (Rear)

1 3 4 567 118 9 102

e.g., [BTT885] [BTT865]

[BTT885] [BTT865] Wireless system

WIRELESS LINK

Top

Rear

1 Wireless link indicator

Green lights: Wireless link is

activated.

blinks (slow): Searching mode

blinks (fast): Pairing mode

Red lights: Sleeping mode

2 Enable pairing

3 Speaker terminals

4 AC IN terminal

SC-BTT885&865&505EG-VQT5F69_mst.book 10 ページ２０１４年２月１８日　火曜日　午後３時２４分

Getting started

- 11 -

Setting up the system

Follow the “Owner’s Manual <Setup>” to set up

the system first.

∫ Speakers

≥ Keep your speakers at least 10 mm away from

the system to avoid noise generated by

resonance.

≥ For optional wall mount, refer to page 36.

Centre speaker

≥ Put it on a rack or shelf not to interfere with the

TV’s various sensors (ambient light, etc.).

Vibration caused by the speaker can disrupt the

picture if it is placed directly on the TV.

Surround speakers

≥ Place the speakers at the same height or higher

than ear level.

≥ [BTT505] You can enjoy surround speaker sound

wirelessly. Use the optional Panasonic wireless

system (SH-FX82).

[BTT885] [BTT865] Wireless system

≥ To avoid interference, separate the wireless

system from the other electronic devices that

use the same radio frequency (2.4 GHz band).

≥ Place the wireless system within approximately

10 m from the main unit.

≥

To allow for proper ventilation and to maintain

good airflow around the wireless system,

position it with at least 5 cm of space on all sides.

≥ Do not use the wireless system in a metal

cabinet or bookshelf.

∫ HDMI

≥ Use the ARC* compatible High Speed HDMI

cables. Non-HDMI-compliant cables cannot be

utilized.

It is recommended that you use Panasonic’s

HDMI cable. When outputting 1080p or 24p

(4K) signal, please use HDMI cables 5.0 meters

or less.

* ARC is an abbreviation of Audio Return Channel, also

known as HDMI ARC. This feature allows a home theatre

system to receive and play audio from the TV through a

single HDMI cable without additional wiring.

∫ DIGITAL AUDIO IN

≥ The dual audio cannot be changed. Change the

setting on the connected device.

∫ FM antenna

≥ Use an FM outdoor antenna if radio reception is

poor.

∫ AC mains lead

≥ The wireless system ([BTT885] [BTT865]) and this

unit consume a small amount of AC power

(> 43, 44) even when turned off in standby

mode. For the purpose of energy conservation,

the unit should be disconnected if you will not

be using it for extended period of time.

Precautions

SC-BTT885&865&505EG-VQT5F69_mst.book 11 ページ２０１４年２月１８日　火曜日　午後３時２４分

Getting started

- 12 -

∫ When the connecting devices have an HDMI terminal



≥ When connecting to a device that outputs 4K signals, connect an HDMI cable to the HDMI1 IN terminal of the unit.

≥ HDMI standby pass-through

Even if this system is in standby mode, the audio and/or video signal from the device connected to the HDMI1 IN or HDMI2

IN terminal will be sent to the TV connected to the HDMI AV OUT terminal (the sound will not be output from this system).

Even while the unit is in the standby mode, you can change the input signal HDMI1 IN or HDMI2 IN by pressing [SELECTOR]

on the remote control.

∫ When the connecting devices do not have an HDMI terminal

Other device connection

AV I N

(ARC)

AV O U T

e.g.,

Set Top Box, etc.

Video game, etc.

HDMI cable

(not supplied)

HDMI cable

(not supplied)

OPTICAL

OUT

e.g.,

Optical digital audio cable

(not supplied)

Set Top Box, etc.

SC-BTT885&865&505EG-VQT5F69_mst.book 12 ページ２０１４年３月１９日　水曜日　午後５時２５分

Getting started

- 13 -

The following services can be used when this unit is connected to broadband.

≥ Firmware can be updated (> 15)

≥ You can enjoy BD-Live (> 19)

≥ You can enjoy Network Service (> 25)

≥ You can access other devices (Home Network)

(> 26)

≥ This unit supports Wi-Fi Direct

and can make

a wireless connection to wireless devices

without router. You can use this function when

enjoying Home Network feature, etc. Internet

access is not available while connected via

Wi-Fi Direct

. (> 26, 32)

For details about connection method, refer to the instructions supplied with the connected equipment.

This unit has built in Wi-Fi

and can be connected to a wireless router.

≥ For up-to-date compatibility information on your wireless router, refer to

http://panasonic.jp/support/global/cs/

(This site is in English only.)

≥ The unit is not compatible with public wireless LAN services provided in airports, stations, cafes, etc.

≥ See page 3 for the precautions of wireless LAN connection.

≥ Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices.

≥ Inserting any cable other than a LAN cable in the LAN port can damage the unit.

Connecting to the network

Wireless LAN connection

Wireless router, etc.

Internet

LAN cable connection

LAN Cable (not supplied)

Internet

Broadband router, etc.

SC-BTT885&865&505EG-VQT5F69_mst.book 13 ページ２０１４年２月１８日　火曜日　午後３時２４分

Getting started

- 14 -

Settings

The following settings can be performed anytime

in the Setup menu. (> 32, 33)

After connecting your new home theatre for the

first time and pressing [Í], the basic settings

screen will appear.

Preparation

Turn on the TV and select the appropriate

video input.

1 Press [Í].

Setup screen appears.

2 Follow the on-screen instructions to

continue with the settings.

[BTT885] [BTT865]

≥ To use the wireless system, pairing is

required.

Follow the on-screen instructions to pair the

unit with the wireless system.



[BTT885] [BTT865]

≥ The wireless link indicator of the wireless system lights

green when the unit and the wireless system are

connected wirelessly.

After completing “Easy Settings”, you can perform

“Easy Network Setting”.

Select “Wired” or “Wireless” and press [OK].

Follow the on-screen instructions to establish

your connection settings.

∫ About the wireless connection

Before beginning wireless connection setup

≥ Obtain your network name (SSID*).

≥ If your wireless connection is encrypted, please

be sure that you know your encryption key.

If your SSID is not displayed;

≥ Search again by pressing the red button on the

remote control.

≥ Stealth SSIDs will not be displayed; in this case,

enter manually by using “Manual setting”.

While displaying the HOME menu, press

[SETTINGS]

> select “Network” and press [OK]

> select “Network Settings” and press [OK]

> select “Wireless Settings” and press [OK]

> select “Connection Setting” and press [OK]

> select “Manual setting” and press [OK]

If your wireless network is encrypted;

Encryption Key input screen will be displayed.

Input the encryption key of your network.

If your wireless router supports WPS (Wi-Fi

Protected Setup

);

You can easily set up a connection by pressing

the green button on the remote control.



≥ Refer to the operating instructions of the hub or router.

≥ Do not use this unit to connect to any wireless network for

which you do not have usage rights.

Using these networks may be regarded as illegal

access.

≥ If you have trouble getting online on your PC after

performing network settings on this unit, perform the

network settings on your PC.

≥ Please be aware that connecting to a network without

encryption may result in the leaking of data such as

personal or secret information.

* SSID:

An SSID (Service Set IDentification) is a name used by

wireless LAN to identify a particular network. Transmission

is possible if the SSID matches for both devices.

Easy Settings

Easy Network Setting

RETURN

Easy Network Setting

Wired

Wireless

Select a connection mode.

SC-BTT885&865&505EG-VQT5F69_mst.book 14 ページ２０１４年２月１８日　火曜日　午後３時２４分

Getting started

- 15 -

Occasionally, Panasonic may release updated

firmware for this unit that may add or improve the

way a feature operates. These updates are

available free of charge.

This unit is capable of checking the firmware

automatically when connected to the Internet via

a broadband connection.

When a new firmware version is available, the

following message is displayed.

DO NOT DISCONNECT the unit from the AC

power or perform any operation while the update

is in process.

After the firmware is installed, “FIN” will be

displayed on the unit’s display. Unit will restart

and the following screen will be displayed.



≥ If downloading on this unit fails or this unit is not

connected to the Internet, then you can download the

latest firmware from the following website and burn it

to a CD-R to update the firmware.

http://panasonic.jp/support/global/cs/

(This site is in English only.)

To show the firmware version on this unit. (> 35,

“Firmware Version Information”)

≥ Downloading will require several minutes. It may take

longer or may not work properly depending on the

connection environment.

≥ If you do not want to check for the latest firmware version,

set “Automatic Update Check” to “Off”. (> 35)

Inserting or removing

media

≥ When inserting a media item, ensure that it is

facing the correct way, which is the right side

facing up.

≥ Use the front USB port when you connect an

iPod/iPhone.

Enjoying TV with the

speakers of the system

Press [SELECTOR] several times to select the

appropriate external input mode. (> 16)

≥ Reduce the volume on the TV to its minimum,

and then adjust the volume of the main unit.

Firmware updates

Firmware Update

Current Version: X.XX

New Version: X.XX

Do you want to start firmware update?

For the update information, please visit the

following website:

http://panasonic.net/support/

Yes No

RETURN

The firmware was updated.

Current Version

x.xx

RETURN

* (For details > 20)

SC-BTT885&865&505EG-VQT5F69_mst.book 15 ページ２０１４年２月１８日　火曜日　午後３時２４分

Getting started

- 16 -

HOME menu

Major functions of this unit can be operated from

the HOME menu.

Preparation

Turn on the TV and select the appropriate video

input.

1 Press [Í] to turn on the unit.

≥ After network service introduction banner is

shown, the HOME menu is displayed.

–When connected to the network, the

banner content may be changed.

–You can disable the “Start-up Banner”

(> 34).

≥ If the HOME menu is not displayed, press

[HOME].

2 Press [OK] or [3, 4, 2, 1] to select the

item.

≥ If there are any other items, repeat this

step.

Network

Videos/Photos/Music

Setup

To show the HOME menu

Press [HOME].

∫ Input selection

1 While displaying the HOME menu, press

[OPTION].

2 Select the source and press [OK].

≥ When you want to output audio of an

external device from this unit, select the

terminal connected to the device.



≥ Items to be displayed may vary with the media.

≥ When the selector is switched, it may take time to play

back the selected video and/or audio.

≥ Where necessary, set “Mixed Data Disc Option” when

using a disc with both data files (MP3, JPEG, MKV, etc.)

and Video (BDAV and AVCHD). (> 34)

≥ To save on electricity, this unit is turned off automatically if

there is no button operation for about 20 minutes when not

playing back (such as when paused or displaying the

menu, displaying still pictures, etc.).

Network

Service

Displays the Home Screen

of Network Service. (> 25)

Home

Network

DLNA Client (> 26)

Miracast (> 26)

Media Renderer (> 27)

Disc

Play back the contents.

(> 18, 20)

≥ When multiple contents are

recorded, select the types

of contents or the title.

* This is displayed only

when “Music” is selected.

USB

iPod*

MusicPhotos Setup

HOME

1st user

Videos

Home Cinema

Selector

Setup

Network

Settings (> 30)

USB

Management

(> 19)

Wallpaper

Changes the background of

HOME menu.

Bluetooth

(> 21)

FM Radio

(> 24)

AUX

AUX terminal

ARC

HDMI AV OUT (ARC)

terminal

DIGITAL IN

DIGITAL AUDIO IN terminal

HDMI IN1

HDMI IN2

HDMI1 IN (CABLE/SAT)

and/or HDMI2 IN terminal

(> 12)

SC-BTT885&865&505EG-VQT5F69_mst.book 16 ページ２０１４年２月１８日　火曜日　午後３時２４分

Getting started

- 17 -

Multi User Mode

Multi User Mode allows individuals to customize

settings and switch to their saved settings easily.

Up to four people can use the unit with their own

settings.

The following settings can be personalized:

≥ The user icon

≥ The wallpaper of HOME menu

≥ The specific settings (> 27, 30)

A The user name and icon currently selected

B Personalize a new user and switch between

users with coloured buttons.

1 Press [HOME].

2 Press the coloured button that indicates

new user personalization.

3 Select an item and change the settings

according to the indications.

The following items can be set.

4 Select “Confirm” and press [OK].

To change the personalized user information

Select “Edit User Information” from Setup menu.

(> 34)

Press the coloured buttons in the HOME menu

to switch to the user information

corresponding to the button.

MusicPhotos Setup

HOME

Videos

Home Cinema

User 1

2nd user

Selector

Setup

Network

Personalizing a new user

Input

Nickname

Personalize a user name.

Select Icon

Personalize a user icon.

Select from Illustrations

The image can be selected from

prepared illustrations.

Create from Photos

You can select a photo in

recording media as an icon.

(> 28, “Icon Registration”)

Select

Wallpaper

Personalize a background of the

HOME menu.

≥ In addition to the default

wallpapers, you can select a

photo in recording media as a

wallpaper. (> 28, “Wallpaper”)

Switching the user information

SC-BTT885&865&505EG-VQT5F69_mst.book 17 ページ２０１４年２月１８日　火曜日　午後３時２４分

- 18 -

Playback

1 Insert the media.

Playback starts depending on the media.

2 Select the item to play and press [OK].

Repeat this step if necessary.



≥ DISCS CONTINUE TO ROTATE WHILE MENUS ARE

DISPLAYED. Press [∫STOP] when you have finished

playback to protect the unit’s motor, your TV screen and so

on.

≥ When the following conditions are met, a still picture will be

played back in 4K. The resolution of the still picture will be

changed automatically.

– The unit is connected to a 4K compatible TV

– “HDMI Video Format” is set to “Automatic” (> 30)

– The still picture is being played back in 2D

≥ It is not possible to play back AVCHD and MPEG2 videos

which have been dragged and dropped or copied and

pasted to the media.

The following functions may not work depending

on the media and contents.

Press [∫STOP].

The stopping point is memorized.

Resume play function

Press [1PLAY] to restart from this point.

≥ The point is cleared if the media is removed.

≥ On BD-Video discs including BD-J, the

resume play function does not work.

Press [;PAUSE].

≥ Press [;PAUSE] again or [1PLAY] to restart

play.

While playing, press [SEARCH6] or

[SEARCH5].

Slow motion

While paused, press [SEARCH5].

The speed increases up to 5 steps.

≥ Music and MP3, etc.: The speed is fixed to a

single step.

≥ Press [1PLAY] to revert to normal playback

speed.

While playing or paused, press [:] or

[9].

Skip to the title, chapter or track.

While paused, press [1] (;1).

≥ Press and hold to fast forward.

≥ Press [1PLAY] to revert to normal playback

speed.

Press [AUDIO].

You can change the audio channel number or

soundtrack language, etc.

Press [POP-UP MENU/TOP MENU].

Select the item and press [OK].

While playing, press [STATUS].

The status messages give you information about

what is currently being played. Each time you

press [STATUS], the display information may

change or disappear from the screen.

≥ Depending on media and contents, the display

may change or not appear.

e.g., BD-Video

A T: Title, C: Chapter, PL: Playlist

B Elapsed time in the title

C Current position

D To tal time

e.g., JPEG

Operations during playback

Stop

Pause

Search/Slow motion

Skip

Frame-by-frame

Changing audio

Show top menu/pop-up menu

Show the status messages

Play

BD-Video

 T 1 C 1 0:05.14

0:20.52

C D

Date 11.12.2007

Size 500X375

Manufacturer

Equipment

1 / 26

SC-BTT885&865&505EG-VQT5F69_mst.book 18 ページ２０１４年２月１８日　火曜日　午後３時２４分

- 19 -

Playback

Preparation

Connect this unit to a 3D compatible TV.

≥ Perform the necessary preparations for the TV.

≥ Play back following the instructions displayed

on the screen.

≥ 3D Settings (> 29, 31)



≥ Please refrain from viewing 3D images if you do not feel

well or are experiencing visual fatigue.

In the event that you experience dizziness, nausea, or

other discomfort while viewing 3D images, discontinue use

and rest your eyes.

≥ 3D video might not output the way it is set in “HDMI Video

Format” and “24p(4K)/24p Output” (> 30).

≥ When playing back 3D photos from “Photos” screen, select

from the “3D” list. (Still pictures in “2D” are played back in

2D.) If “2D” and “3D” indications are not displayed, press

the red button on the remote control to switch the view of

playback contents.

With “BD-Live” discs, you can enjoy bonus

contents that use Internet access.

For this BD-Live function, connection of a USB

device is necessary along with Internet

connection.

1 Perform network connection and settings.

(> 13, 14)

2 Connect a USB device with 1 GB or more

free space.

≥ The USB device is used as the local

storage.

3 Insert the disc.

∫ Deleting data on the USB device

Select “USB Management” in the HOME menu

(> 16), then select “BD-Video Data Erase” and

press [OK].



≥ The usable functions and the operating method may vary

with each disc, please refer to the instructions on the disc

and/or visit their website.

≥ “BD-Live Internet Access” may need to be changed for

certain discs (> 33).

Play a slideshow of photos and adjust various

settings during the playback.

1 Insert the media.

2 Select “Photos”.

3 Select an item and press the green button.

The following items can be set.



≥ Still pictures displayed as “ ” cannot be played back

with this unit.

Enjoying 3D video and photos

Enjoying BD-Live

Slideshow

Start

Slideshow

Start the slideshow.

You can display still pictures in

the selected folder one by one

at a constant interval.

Interval Change the display interval.

Transition

Effect

Select the effect when sliding

pictures.

Repeat Play

Set whether to repeat the

slideshow.

SC-BTT885&865&505EG-VQT5F69_mst.book 19 ページ２０１４年２月１８日　火曜日　午後３時２４分

- 20 -

Playback

Using the iPod/iPhone

Compatible iPod/iPhone (as of Feburary 2014)

≥ Update your iPod/iPhone with the latest

software before using this unit.

≥ Compatibility depends on the software version

of your iPod/iPhone.

≥ iPod/iPhone compatibility assures music

playback and battery charge functions of this

unit as a home theatre system.



≥ In some locations, reception status of an iPhone may be

poor when it is loaded on this unit.

≥ When the iPhone receives a call while connected to this

unit, playback of the iPhone may stop.

To prioritize the operation with the iPhone connected to this

unit, make the setting so that the iPhone does not receive

calls.

≥ Avoid using Wi-Fi mode on your iPhone in the following

case.

– When the network functions on this unit are in use

wirelessly.

– When the surround speakers on this unit are in use

wirelessly.

About recharging the battery

≥ iPod/iPhone will start recharging when this unit is on.

≥ iPod/iPhone will not be recharged after the battery charge

completion.

Preparation

≥ Turn the main unit off or reduce the volume of

the main unit to its minimum.

Connect the iPod/iPhone.

To purchase a dedicated USB cable, consult

your iPod/iPhone dealer.

1 Press [HOME].

2 Select “Music”.

3 Select “iPod”.

4 Play a music on your iPod/iPhone.



≥ Surround sound effect and sound mode are available.

iPhone 5s / iPhone 5c / iPhone 5 / iPhone 4S /

iPhone 4 / iPhone 3GS / iPhone 3G

iPod touch:

1st, 2nd, 3rd, 4th and 5th generation

iPod nano:

2nd, 3rd, 4th, 5th, 6th and 7th generation

iPod/iPhone Connection

iPod/iPhone Playback

Dedicated USB cable

(not supplied)

iPod/iPhone (not supplied)

e.g.,

SC-BTT885&865&505EG-VQT5F69_mst.book 20 ページ２０１４年２月２８日　金曜日　午前１１時３０分

Page is loading ...

Panasonic SCBTT885EG Owner's manual

Brand: Panasonic

Model: SCBTT885EG

Category: Blu-Ray players

Type: Owner's manual

This manual is also suitable for

Download PDF

report

Panasonic SCBTT885EG Owner's manual

This manual is also suitable for

Panasonic SCBTT885EG Owner's manual

Related papers

Other documents