Bauknecht Super Eco 6413 Owner's manual

Brand: Bauknecht

Model: Super Eco 6413

Type: Owner's manual

Bauknecht Super Eco 6413: This advanced washing machine offers exceptional laundry care with its innovative features. Its intelligent dosing aid precisely determines the recommended detergent quantity for each wash, saving detergent and protecting the environment. The device also features an intuitive control panel with a clear display, making it user-friendly and easy to operate. Additionally, its range of programs, including Delicates and Wool/Handwash, ensures optimal fabric care.

Dosing aid

1. Detergent dosage values

5019 106 01632

Check one of the preset dosage values

(detergent calibration) and set it correctly, if applicable.

Let us assume you wish to check and set, where applicable, the preset dosage values for all programmes for the General detergent group.

Note: Do not take into account the local water hardness and the usual soil level of your washing in this phase. Simply follow the

steps set out below.

The concentration of the standard detergent often differs considerably. For this reason, you need to adjust the

settings of your washing machine to the dosage details of your detergent.

Your washing machine is supplied with 3 preset dosage values for 3 different detergent types (general - delicates

- dark colours). Every detergent type is assigned to a programme group (see table on the right). Every one of

the 3 preset values must be corrected and adjusted to the dosage recommendations on the packaging of your

detergent, which you wish to you use for every programme group.

A - check

First check on the package of your general detergent what dosage quantity is stated for medium water hardness

(or medium/soft) or for the medium soil level (or medium/minor). Use this value in step 3 of the process that is

described in the following section

(see B - settings).

Dark

colours

Delicates General

Dark

Wool/Handwash

and

Delicates

All other programmes

This function determines the recommended quantity of detergent for your washing for you. With the dosing aid, you avoid overdosage and • save detergent

• protect the environment

• protect sensitive skin

Before using the device for the first time 1. Compare the dosage recommendations of your detergent with the preset dosage values of your washing machine. If they do not match, please set the values of your washing

machine accordingly.

Ensure that your dosage display can work optimally.

2. Please check whether the water hardness in your region coincides with the preset water hardness of your washing machine and correct the presettings, if applicable.

Water hardness

Hard

Minor

Soft

Soil level

Medium

Strong

B - settings (detergent calibration)

Select a programme of the programme group for which you wish to check and possibly correct the preset dosage value (for example, the Hot/Colours programme for the General group).

Select the Rinse and spin-dry

programme.

Press the Dosage display key for a

couple of seconds; the bottle symbol

and three horizontal lines appear on the

display.

Press the Reset/Drain key briefly; rES

is briefly shown on the display.

Confirm with the OK key; all previous

ex works set values are restored.

If you wish to reset the settings of the detergent quantity to the original status

Carry out these steps for all 3 programme groups.

It is sufficient to make the settings in ONE programme per programme group. The value is automatically transferred to the other programmes within this programme group. Example: If you save a value for Hot/Colour, it is automatically

transferred to all programmes of the General group.

If you wish to change the dosage values saved (if you, for instance, are using a different detergent type), proceed in the same way; the previously saved value is replaced by the new value for the programme of the group selected.

Press the Dosage display key for a

couple of seconds.

The bottle symbol lights up and

the currently saved dosage value is

displayed.

Compare the preset value on the display

with the previously determined dosage

quantity (i.e. with the quantity that is stated

on the detergent packaging for a medium

water hardness and a medium soil level).

If the values deviate, you can adjust the

value displayed with the + and - keys.

Confirm by pressing OK button. The

new detergent values for the group were

saved.

The value on the display goes out and

the display resets to the starting status.

Select a programme of the programme

group for which you wish to restore the

previous ex works dosage values.

Press the Dosage display key for a

couple of seconds; the bottle symbol and

the currently saved dosage value are

displayed.

Press the Reset/Drain key briefly; rES

is briefly shown on the display.

The preset dosage value appears on

the display.

Press the OK key to confirm.

For a certain programme

group:

For all programmes:

5019 106 01632

Medium

Hard

A - determine your local water hardness

When washing with hard water, you need more detergent than with soft water. For that reason, you must check whether the preset water hardness corresponds to the local water hardness.

You can enquire with your waterworks about the local water hardness or use the test strip enclosed with the Calgon brochure, which is supplied with the washing machine (if available).

The test strip contains 4 green squares,

which go red depending on the water

hardness:

Soft

1 red square

B - correct water hardness settings

Your washing machine is set to the SOFT water hardness by standard. If the water hardness in your region is medium or hard, you need to correct the water hardness set of your washing machine in accordance with the description

below.

Set the programme selection switch to

any programme and thereby switch the

machine on

Simultaneously press the Dosing aid

and + keys for a couple of seconds.

A horizontal bar appears on the

display. This is the symbol for the SOFT

water hardness degree.

Change the water hardness with

the + and - keys to Medium or Hard, if

applicable.

Press OK to confirm and save.

Tear off the paper packaging in one

corner and take out the test strip.

Immerse the strip in tap water for only

1 second.

Immediately shake off any excess

water.

Wait for 1 minute to see the result.

2. Water hardness

Medium

2 red squares

3 or 4 red squares

Hard

Soft

5019 106 01632

Dosage display - DAILY USE

ImportAnt notES

• You need to select all additional functions before you start the washing programme. This means before you press the

Start (Pause) button for the first time.

• IF you wish to fill washing while Dosage display is selected after the first pressing of the Start (Pause) key, proceed as

follows:

- Press the Rest/Drain button for a couple of seconds, the display shows the standard settings of the programme.

- Wait until the door is unlocked (this can take more than 1 minute).

- Load the washing and carry out the previously described steps (Daily use). The recommended detergent quantity is

displayed.

• If you have selected Dosage display, you need to refill detergent into the detergent chamber. You cannot enter the

detergent into the drum directly, as the door is locked while the dosage quantity is displayed.

• If you wish to reset everything while Dosage display is selected after the first pressing of the Start (Pause) key, proceed

as follows:

- Press the Rest/Drain button for a couple of seconds, the display shows the starting status. It may take longer than one

minute to unlock the door.

• The programme duration of small washing quantities (such as Delicates, Wool/Handwash, etc. - see separate

programme overview) is not adjusted to the washing quantity loaded additionally.

• The actual programme duration may differ from the time shown on the display even after determining the washing

quantity. This is down to the fact that factors such as a reduced water inlet temperature may result in a longer heating

duration. The display shows an animation while the programme duration is recalculated.

• If you fill the drum with wet washing, do not use the entire detergent quantity suggested by the Dosage display, use only

2/3 of the quantity recommended.

• The smallest washing load determined by the Dosage display is 2 kg, also for smaller loads under 2 kg.

Start the programme.Enter the recommended detergent

quantity in the detergent box.

After about ten seconds, your washing

machine suggests the recommended

detergent quantity.

Select Dosage display and start the

washing machine

Load your washing

machine with

washing.

Select the desired

programme and the

additional functions.

Press Dosage display key.

The relevant symbol appears on the

display.

The recommended detergent quantity

in ml is shown on the display.

Now pour the recommended

detergent quantity in the corresponding

compartment of the detergent chamber.

Press the Start (Pause) button again.

Prewash

Main wash

Press Start (Pause). The door is locked.

The drum turns slowly for 10 seconds to

determine the load. An animation is shown

on the display.

For the Wool and Delicates programmes,

the drum turns even more carefully.

If you have selected the Prewash

option, the display shows the

detergent quantity for the prewash

chamber alternately. (highlighted

with I) and for the main washing

chamber (highlighted with II) of the

detergent drawer.

The washing machine recalculates

the programme duration on the basis

of the washing load determined while

the display shows an animation. The

new washing programme duration

is displayed, and the new washing

programme starts automatically.

5019 106 01632

Bauknecht Super Eco 6413 Owner's manual

Bauknecht Super Eco 6413 Owner's manual

Bauknecht Super Eco 6413 Owner's manual

Related papers

Other documents