13
Gene ra l Functi ons
Answering a call
When you receive a call, the phone rings
and the flashing phone icon appears on the
screen. If the caller can be identified, the
caller’s phone number (or name if stored in
your Contacts) is displayed.
1. Open the slider to answer an incoming call.
Note
v
To reject an incoming call, press
e
or the right soft key twice.
v
If you set Answer mode as Press
send key (Menu 2.0.4), you can
answer the call by pressing
s
after opening the slider.
v
If the answer mode is set to Press any
key, any key will answer a call except
for
e
.
2. End the call by closing the handset or
pressing
e
.
Note
v
You can answer a call while using the
Contacts or other menu features.
v
When the compatible headset is
connected, you can also answer a
call using the headset key, as well
as using the phone. To reject an
incoming call, press
e
.
v
You can mute the ringtone when a
call comes in by pressing and holding
the volume down side key.
Signal strength
You can check the strength of your signal by
the signal indicator on the LCD screen of your
phone. Signal strength can vary, particularly
inside buildings. Moving close to a window
may improve reception.
