Glacier Bay HD67772W-5085 Installation guide

Brand: Glacier Bay

Model: HD67772W-5085

Category: Sanitary ware

Type: Installation guide

This manual is also suitable for

HD67772W-5091

The Glacier Bay HD67772W-5085 is a single-handle lavatory faucet designed for easy installation and reliable performance. With its durable construction and stylish design, it's an ideal choice for upgrading your bathroom. The faucet features a single lever handle for effortless control of water flow and temperature, making it user-friendly for all. Its modern design will complement a variety of bathroom décor styles. The Glacier Bay HD67772W-5085 comes with all the necessary hardware for installation, making it a convenient choice for DIY enthusiasts.

THANK YOU

INSTALLATION AND CARE GUIDE

Questions, problems, missing parts?

Before returning to the store, call Glacier Bay Customer Service

8 a.m. - 7 p.m., EST, Monday - Friday

9 a.m. - 6 p.m., EST, Saturday

1-855-HD-GLACIER (1-855-434-5224)

HOMEDEPOT.COM

SINGLE-HANDLE LAVATORY FAUCET

We appreciate the trust and condence you have placed in Glacier Bay through the purchase of this lavatory

faucet. We strive to continually create quality products designed to enhance your home. Visit us online to see

our full line of products available for your home improvement needs. Thank you for choosing Glacier Bay!

12/2017 REV.01HOMEDEPOT.COM

Model#

HD67772W-5091

HD67772W-5085

Internet#

304353806

304353810

SKU#

1003015440

1003015437

Table of Contents

Important Information ..............................2

Warranty ...................................................2

Pre-Installation .........................................2

Planning Installation ..............................2

Package Contents ..................................3

Installation ................................................4

Care and Cleaning ....................................6

Troubleshooting ........................................6

Service Parts

...........................................

Important Information

□ Observe all local plumbing and building codes.

□ Cover the sink drain to avoid losing any parts.

□ Review the care and cleaning section included in this guide.

Pre-Installation

PLANNING INSTALLATION

Before beginning the installation of this product, ensure all parts are present. Compare parts with the Package

Contents list. If any part is missing or damaged, do not attempt to install the product. Contact Customer Service

for replacement parts.

TOOLS AND HARDWARE REQUIRED

Adjustable

wrench

Safety

goggles

SILICONE

Silicone

sealant

Tools and Hardware Required ...............2

Operation...................................................6

Warranty

LIMITED LIFETIME WARRANTY

Glacier Bay products are manufactured with superior quality standards and workmanship and are backed by our

limited lifetime warranty. Glacier Bay products are warranted to the original consumer purchaser to be free of

defects in materials or workmanship. We will replace FREE OF CHARGE any product or parts that proves defective.

Simply, return the product / part to any of The Home Depot retail locations or call 1-855-HD-GLACIER (1-855-434-

5224) to receive the replacement item. Proof of purchase (original sales receipt) from the original consumer

purchaser must be made available for all Glacier Bay warranty claims.

This warranty excludes incidental/inconsequential damages and failures due to misuse, abuse or normal wear and

tear. This warranty excludes all industrial, commercial and business usage, whose purchasers are hereby extended

a ve year limited warranty from the date of purchase, with all other terms of this warranty applying except the

duration of warranty.

Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so the

above limitations may not apply to you. This warranty gives you specic legal rights and you may also have other

rights that vary from state to state and province to province. Please see a store or contact 1-855-HD-GLACIER for

more details.

Contact the Customer Service Team at 1-855-434-5224 or visit www.HomeDepot.com.

Channel

lock pliers

Pre-Installation (continued)

PACKAGE CONTENTS

HOMEDEPOT.COM

Please contact 1-855-HD-GLACIER for further assistance.

Faucet Assembly

Press Pop-Up Assembly

Part Description Quantity

A 1Faucet

B 1Flange

C 1Washer

D 1Lock nut

Part Description Quantity

E 1Pop-up body

F 1Washer

G 1Washer

H 1Coupling nut

I 1Washer

J 1Nut

K 1Tail pipe

Installation

Installing the faucet assembly

CAUTION: Always shut off the water supply before

removing an existing faucet or replacing any part of a

faucet. Open the faucet handle to relieve water pressure

and ensure that the water is completely shut off.

□ Shut off the water supply. Remove the old

faucet.

□ Place the faucet (A) through the mounting holes

in the sink until the faucet (A) sets on top of the

sink.

□ Secure the faucet (A) to the sink using the

washer (C) and lock nut (D) provided.

NOTE: Ensure the washer (C) and hoses (1) are no

interference.

□ Clean the mounting surface.

□ Remove the preassembled lock nut (D) and

washer (C) from the new faucet (A).

□ Before installation, ensure that the ange (B) is

placed on the bottom of the new faucet (A).

Preparing the pop-up drain

□ Remove the old pop-up drain and clear up the

hole in preparation for the new pop-up drain

installation.

□ Unscrew the nut (J) from the pop-up body (E),

move over the tail pipe (K) and washer (I), then

unscrew the coupling nut (H) and remove the

washer (G).

HOMEDEPOT.COM

Please contact 1-855-HD-GLACIER for further assistance.

Installation (continued)

Making the water supply

connections

□ Thread the nut (1) on the supply line onto the

outlet of the water supply valve (2) and tighten

with a wrench. Do not overtighten.

NOTE: The hot side inlet tube is indicated by a label. Avoid

twisting wires together or placing the wires close to each

other and damaging.

Installing the pop-up body

□ Place the washer (F) underneath the ange of

the pop-up body (E). Slide the pop-up body (E)

down through the drain hole on the vessel or

basin.

□ From underside, slide the washer (G) against

the bottom of the vessel or basin, thread on

the coupling nut (H) and tighten. Do not over

tighten.

Installing the tail pipe

□ Slide the nut (J) over the tail pipe (K).

□ Place the washer (I) into the nut and tighten.

Do not overtighten.

Care and Cleaning

□ To clean, wipe down with a damp cloth and dry with a towel.

□ Do not use abrasive cleaners, steel wool, or harsh chemicals when cleaning this faucet, or the warranty will

be voided.

Flushing and checking for leaks

Operation

□ Ensure the faucet (A) handle is in the off

position, and turn on the water supply to check

for leaks. If you discover any leaks, check your

connections to ensure they are installed properly.

□ Turn on the hot and cold water handle to allow

the water to run for at least one minute. This

ushes away any debris that could cause

damage to internal parts.

□ Turn off the water.

Troubleshooting

Problem Possible Cause Solution

There are leaks from the

handle.

The bonnet nut has come loose and/or the

washer is dirty or damaged.

□ Tighten the bonnet nut.

□ Clean or replace the washer.

The water will not shut off

completely.

The cartridge is dirty or broken. □ Remove the handle to check

the cartridge.

□ Clean or replace.

NOTE: Refer to the service parts section in this manual for

a detailed drawing showing the location of the parts listed

below.

There is leaking from the

sink drain at the base of

the sink.

The sink has a rough or irregular surface. □ Apply additional silicone sealant

to the beveled side of the drain

ange.

□ Retighten and test for leaks.

Service Parts

*Specify Finish

Many replacement cartridges, aerators, and drain

assemblies can be purchased at your local The

Home Depot store or online at HOMEDEPOT.COM

Part Description Part Number

1 RP13491*

3 Cap RP80564*

Handle assembly

7 Washer RP70228

Press pop-up

assembly

RP40036*

Part Description Part Number

5 Cartridge & Screw RP20082

8 Lock nut RP56091

2 RP80563*Accessorize cap

4 Bonnet nut RP70569

Faucet ID tags can

be found on the

hot water inlet

6 Flange RP80575*

Questions, problems, missing parts?

Before returning to the store, call Glacier Bay Customer Service

8 a.m. - 7 p.m., EST, Monday - Friday

9 a.m. - 6 p.m., EST, Saturday

1-855-HD-GLACIER (1-855-434-5224)

HOMEDEPOT.COM

Retain this manual for future use.

Page is loading ...

Glacier Bay HD67772W-5085 Installation guide

Brand: Glacier Bay

Model: HD67772W-5085

Category: Sanitary ware

Type: Installation guide

This manual is also suitable for

HD67772W-5091

Download PDF

report

in other languages

français: Glacier Bay HD67772W-5085 Guide d'installation
español: Glacier Bay HD67772W-5085 Guía de instalación

Glacier Bay HD67772W-5085 Installation guide

This manual is also suitable for

Glacier Bay HD67772W-5085 Installation guide

in other languages

Related papers

Other documents