Kawasaki 841337 User guide

Brand: Kawasaki

Model: 841337

Category: Power tools

Type: User guide

12-VOLT DC IMPACT WRENCH INSTRUCTION MANUAL

MANUEL D’INSTRUCTIONS DE LA CLÉ À CHOCS DE 12 VOLTS C.C.

MANUAL DE INSTRUCCIONES PARA LA LLAVE DE IMPACTO

DE 12-VOLTIOS DE CC

COMPONENT

COMPOSANT

COMPONENTE

N°691767

FOR CUSTOMER SERVICE

POUR LE SERVICE APRÉS VENTE

OU DU CONSOMMATEUR

PARA EL SERVICIO

PARA EL CONSUMIDOR

1-800-590-3723

Printed in China

Imprimé dans la Chine

Impreso en China

KAWASAKI IS A TRADEMARK LICENSED BY KAWASAKI MOTORS

CORP., U.S.A., WHICH DOES NOT MANUFACTURE OR

DISTRIBUTE THIS PRODUCT. CONSUMER INQUIRES SHOULD BE

DIRECTED TO:

KAWASAKI EST UNE MARQUE DE COMMERCE DE KAWASAKI

MOTORS CORP., U.S.A., QUI NE FABRIQUE PAS ET NE DISTRIBUE

PAS CE PRODUIT THIS PRODUCT. LES QUESTIONS DES CONSOM-

MATEURS DOIVENT ÊTRE ADRESSÉES À :

KAWASAKI ES UNA MARCA REGISTRADA CON LICENCIA DE

KAWASAKI MOTORS CORP., E.U.A., QUE NO FABRICA NI

DISTRIBUYE ESTE PRODUCTO. LAS CONSULTAS DE LOS

CONSUMIDORES DEBEN DIRIGIRSE A:

1431 VIA PLATA

LONG BEACH, CA 90810-1462 USA

691767-12V DC Impact Wrench, Clé à chocs de 12 volts c.c., Llave de

impacto de 12-voltios de cc_Rev 6/24/10

THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY, OPERATION, MAINTENANCE AND STORAGE OF THIS

PRODUCT. BEFORE USE, READ CAREFULLY AND UNDERSTAND ALL CAUTIONS, WARNINGS, INSTRUCTIONS AND PRODUCT

LABELS. FAILURE TO DO SO COULD RESULT IN SERIOUS PERSONAL INJURY AND/OR PROPERTY DAMAGE.

CE MANUEL CONTIENT DES INFORMATIONS IMPORTANTES CONCERNANT LA SÉCURITÉ, LE FONCTIONNEMENT ET LE

REMISAGE DE CE PRODUIT. LIRE, ÉTUDIER ET VEILLER À BIEN COMPRENDRE TOUTES LES MISES EN GARDE ET INSTRUCTIONS

ET AUTOCOLLANTS APPOSÉS SUR LE PRODUIT AVANT DE L’UTILISER. NE PAS RESPECTER CES INSTRUCTIONS POURRAIT

ENTRAÎNER DES BLESSURES ET/OU DES DOMMAGES MATÉRIELS.

ESTE MANUAL CONTIENE INFORMACIÓN IMPORTANTE SOBRE LA SEGURIDAD, OPERACIÓN, MANTENIMIENTO Y ALMACE-

NAMIENTO DE ESTE PRODUCTO. ANTES DE USARLO, LEA Y COMPRENDA TODAS LAS PRECAUCIONES, ADVERTENCIAS,

INSTRUCCIONES Y ETIQUETAS DEL PRODUCTO. DE LO CONTRARIO PODRÍA SUFRIR LESIONES GRAVES O CAUSAR DAÑOS

MATERIALES.

IF YOU SHOULD HAVE ANY QUESTIONS OR EXPERIENCE A PROBLEM WITH YOUR ALLTRADE PRODUCT, DO NOT RETURN THIS

PRODUCT TO THE STORE. PLEASE CALL OUR CUSTOMER SERVICE DEPARTMENT AT 1-800-590-3723. BEFORE YOU CALL,

HAVE THE FOLLOWING INFORMATION AVAILABLE: MODEL No., DATE PURCHASED AND STORE LOCATION. AN ALLTRADE

REPRESENTATIVE CAN RESOLVE YOUR PROBLEM OVER THE PHONE. IF YOU WOULD LIKE TO MAKE A SUGGESTION OR

COMMENT, GIVE US A CALL OR EMAIL US AT: INFO@ALLTRADETOOLS.COM. YOUR FEEDBACK IS VITAL TO US.

POUR TOUTE QUESTION OU EN CAS DE PROBLÈME AVEC LE PRODUIT ALLTRADE, NE PAS LE RETOURNER AU MAGASIN OÙ IL

A ÉTÉ ACHETÉ. APPELER LE SERVICE APRÈS-VENTEAU 1-800-590-3723. AVANT D’APPELER, VEILLER À SE PROCURER LES

INFORMATIONS SUIVANTES : No. DE MODÈLE, DATE DE L’ACHAT ET ADRESSE DU MAGASIN. UN REPRÉSENTANT D’ALLTRADE

PEUT RÉSOUDRE VOTRE PROBLÈME PAR TÉLÉPHONE. POUR TOUT COMMENTAIRE OU SUGGESTION, N’HÉSITEZ PAS À NOUS

APPELER OU NOUS CONTACTER PAR COURRIEL À L’ADRESSE : INFO@ALLTRADETOOLS.COM. VOS COMMENTAIRES NOUS

SONT EXTRÊMEMENT PRÉCIEUX.

SI TIENE DUDAS O SURGEN PROBLEMAS CON SU PRODUCTO ALLTRADE, NO LO DEVUELVA A LA TIENDA LLAME A NUESTRO

DEPARTAMENTO DE SERVICIO AL CLIENTE AL 1-800-590-3723. ANTES DE LLAMAR, TENGA A MANO LA SIGUIENTE

INFORMACIÓN: No. DE MODELO, FECHA DE COMPRA Y DIRECCIÓN DE LA TIENDA. UN REPRESENTANTE DE ALLTRADE PUEDE

RESOLVER SU PROBLEMA POR TELÉFONO. SI DESEA HACER ALGUNA SUGERENCIA O COMENTARIO, LLÁMENOS O ENVÍENOS

UN MENSAJE DE CORREO ELECTRÓNICO A. INFO@ALLTRADETOOLS.COM. SUS COMENTARIOS SON FUNDAMENTALES PARA

NOSOTROS.

INTENDED USE

This tool is intended for consumer use only and is intended for occasional and inter-

mittent operation. This tool is not designed for professional use. The power cord

should only be used in approved automotive outlets as described in this manual.

GENERAL SAFETY WARNINGS – FOR ALL BATTERY OPERATED TOOLS

READ ALL SAFETY WARNING AND INSTRUCTIONS.

Failure to follow the warning and instructions may result in electric shock, fire

and/or serious injury.

SAVE ALL WARNINGS AND INSTRUCTIONS

FOR FUTURE REFERENCE.

RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS

The safety instructions provided in this manual are not intended to cover all possible

conditions and practices that may occur when operating, maintaining and cleaning

power tools.

Always use common sense and pay particular attention to all the DANGER,

WARNING, CAUTION and NOTE statements of this manual.

This is the safety alert symbol. It is used to alert

you to potential personal injury hazards. Obey all

safety messages that follow this symbol to avoid

possible injury or death.

DANGER indicates an imminently hazardous

situation which, if not avoided, will result in death

or serious injury.

WARNING indicates a potentially hazardous

situation which, if not avoided, could result in

death or serious injury.

CAUTION indicates a potentially hazardous

situation which, if not avoided, may result in

minor or moderate injury.

TABLE OF CONTENTS

CONGRATULATIONS! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

INTENDED USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

SECTION ONE

GENERAL SAFETY RULES—FOR ALL BATTERY OPERATED TOOLS . . 2-6

RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS . . . . . . . . 2-3

IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

WORK AREA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

ELECTRICAL SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

PERSONAL SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

TOOL USE AND CARE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6

SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

SECTION TWO

SPECIFIC SAFETY RULES AND/OR SYMBOLS . . . . . . . . . . . . . . . . . . . 6-8

SAFETY RULES FOR IMPACT WRENCHES . . . . . . . . . . . . . . . . . . . 7

SYMBOLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

SECTION THREE

FUNCTIONAL DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10

INSTALLING / REMOVING SOCKET ON THE ANVIL . . . . . . . . . . . . 10

OPERATING THE IMPACT WRENCH . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-12

DIRECTION SWITCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

REMOVING THE LUG NUTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-12

REINSTALLING THE LUG NUTS . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

CHANGING THE 12 VOLT FUSE . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

SECTION FOUR

ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

MAINTENANCE AND CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

OTHER CONSUMER DO-IT-YOURSELF (DIY) TOOLS . . . . . . . . . . . . . . 13

SECTION FIVE

3 YEAR LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-16

CONGRATULATIONS!

Thanks for choosing this product. At Alltrade, our aim is to provide you with quality

products at an affordable price, and we want you to be totally satisfied with your

product and our Customer Service. If any help or advice is needed, please

years of satisfaction.

WORK AREA

Keep work area clean and well lit. Cluttered or dark areas invite accidents.

Do not operate power tools in explosive atmospheres, such as in the pres-

ence of flammable liquids, gases or dust. Power tools create sparks which

may ignite the dust or fumes.

Keep children and bystanders away while operating a power tool.

Distractions can cause you to lose control.

ELECTRICAL SAFETY

Power tool plugs must match the outlet. Never modify the plug in any way.

Do not use any adapter plugs with earthed (grounded) power tools.

Unmodified plugs and matching outlets will reduce risk of electric shock.

Avoid body contact with earthed or grounded surfaces such as pipes, radia-

tors, ranges and refrigerators. There is an increased risk of electric shock if

your body is earthed or grounded.

Do not expose power tools to rain or wet conditions. Water entering a power

tool will increase the risk of electric shock.

Do not abuse the cord. Never use the cord for carrying, pulling or unplugging

the power tool. Keep cord away from heat, oil, sharp edges or moving parts.

Damaged or entangled cords increase the risk of electric shock.

CAUTION used without the safety alert symbol

indicates a potentially hazardous situation which,

if not avoided, may result in property damage.

NOTE provides additional information that is useful

for proper use and maintenance of this tool. If a

NOTE is indicated make sure it is fully understood.

SAVE THESE INSTRUCTIONS FOR

FUTURE REFERENCE.

IMPORTANT SAFEGUARDS

People with electronic devices, such as pacemakers, should consult their

physician(s) before using this product. Operation of electrical equipment in

close proximity to a heart pacemaker could cause interference or failure of

the pacemaker.

WARNING: Some dust created by power sanding, sawing, grinding, drilling and

other construction activities contains chemicals known to the State of California

to cause cancer, birth defects or other reproductive harm.

Some examples of these chemicals are:

• Lead from lead-based paints.

• Crystalline silica from bricks and cement and other masonry products,

and arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type

of work. To reduce your exposure to these chemicals: work in a well ventilated

area, and work with approved safety equipment, such as dust masks that are

specially designed to filter out microscopic particles.

WARNING: This product contains chemicals known to the State of California

to cause cancer and birth defects or other reproductive harm.

Disconnect the plug from the power source and/or the battery pack from the

power tool before making any adjustments, changing accessories, or storing

power tools. Such preventive safety measures reduce the risk of starting the

power tool accidentally.

Store idle power tools out of the reach of children and do not allow persons

unfamiliar with the power tool or these instructions to operate the power

tool. Power tools are dangerous in the hands of untrained users.

Maintain power tools. Check for misalignment or binding of moving parts,

breakage of parts and any other condition that may affect the power tool’s

operation. If damaged, have the power tool repaired before use. Many acci-

dents are caused by poorly maintained power tools.

Keep cutting tools sharp and clean. Properly maintained cutting tools with

sharp cutting edges are less likely to bind and are easier to control.

Use the power tool, accessories and tool bits etc. in accordance with these

instructions, taking into account the working conditions and the work to be

performed. Use of the power tool for operations different from those intended

could result in a hazardous situation.

Use auxiliary handles (if) supplied with the tool. Loss of control can cause

personal injury.

SERVICE

Have your power tool serviced by a qualified repair person using only iden-

tical replacement parts. This will ensure that the safety of the power tool is

maintained.

Follow instructions in the Maintenance section of this manual. Use of unau-

thorized parts or failure to follow Maintenance Instructions may create a risk of

shock or injury.

SPECIFIC SAFETY RULES AND/OR SYMBOLS

Hold power tool by insulated gripping surfaces,

when performing an operation where the fastener may contact hidden

wiring or its own cord. Fasteners contacting “live” may make exposed

metal parts of the power tool "live" and could give the operator an electric

shock.

PERSONAL SAFETY

Stay alert, watch what you are doing, and use common sense when operat-

ing a power tool. Do not use tool while tired or under the influence of drugs,

alcohol or medication. A moment of inattention while operating power tools

may result in serious personal injury.

Dress properly. Do not wear loose clothing or jewelry. Keep your hair, cloth-

ing, and gloves away from moving parts. Loose clothes, jewelry or long hair

can be caught in moving parts.

Prevent accidental starting. Ensure switch is in the “OFF” position before

connecting to power source and/or battery pack, picking up or carrying the

tool. Carrying power tools with your finger on the switch or energizing power

tools that have the switch “ON” invites accidents.

Remove adjusting keys or wrenches before turning the tool “ON”. A wrench or a

key that is left attached to a rotating part of the tool may result in personal injury.

Do not overreach. Keep proper footing and balance at all times. This enables

better control of the power tool in unexpected situations.

Use personal protective equipment. Always wear eye protection. Protective

equipment such as dusk mask, non-skid safety shoes, hard hat, or hearing protec-

tion used for appropriate conditions will reduce personal injuries.

Wear ear protectors with impact drills. Exposure to noise can cause hearing

loss.

If devices are provided for the connection of dust extraction and collection

facilities, ensure these are connected and properly used. Use of dust collec-

tion can reduce dust-related hazards.

POWER TOOL USE AND CARE

Do not force the power tool. Use the correct power tool for your application.

The correct power tool will do the job better and safer at the rate for which it

was designed.

Do not use the power tool if the switch does not turn it on and off. Any power

tool that cannot be controlled with the switch is dangerous and must be

repaired.

5 6

SYMBOLS

IMPORTANT: Some of the following symbols may be used on your tool. Please

study them and learn their meaning. Proper interpretation of these symbols will

allow you to operate the tool better and safer.

SYMBOL NAME EXPLANATION

V Volts Voltage (Potential)

A Amperes Current

L Liters Volume

Kg Kilograms Weight

Alternating Current Type of Current

or d.c. Direct Current Type of Current

or a.c. Alternating or Direct Current Type of Current

Earthing Terminal Grounding Terminal

Class II Construction Denotes Double Insulation

h Hours Time

min Minutes Time

s Seconds Time

␾ Diameter Size of Drill Bits,

Grinding Wheels, etc.

No load speed No-load Rotational Speed

.../min Revolutions per Minute Revolutions, Surface Speed,

Strokes, etc. per Minute

psi Pounds per square inch Pressure

1,2,3, … Ring Selector Settings Speed, Torque or Position Settings

SAFETY RULES FOR IMPACT WRENCHES

Always wear safety goggles or eye protection when using this tool. Use a

dust mask or respirator for applications which generate dust.

Do not grasp the tool or place your hands too close to the spinning chuck or

drill bit. Your hand may be lacerated or may cause injury.

Secure the material being worked on. Never hold it in your hand or across

your legs. Unstable support can cause loss of control and injury.

Position yourself to avoid being caught between the tool or side handle and

walls or posts. Should the socket or bit become bound in the work, the reac-

tion torque of the tool could crush your hand or leg.

Check to see that keys and adjusting wrenches are removed from the Impact

Wrench before switching the tool “ON”. Keys or wrenches can fly away at high

velocity striking you or a bystander.

When using the Impact Wrench, always maintain a firm grip on the tool with

both hands.

Hold tool by insulated gripping surfaces when performing an operation

where the cutting tool may contact hidden wiring. Contact with a "live" wire

will also make exposed metal parts of the tool "live" and shock the operator.

Keep the handle of the Impact Wrench dry, clean, and free from oil and

grease.

Do not run the Impact Wrench while carrying it at your side. A spinning sock-

et or bit could become entangled with clothing and injury may result.

Do not use the Impact Wrench if it has been damaged, left outdoors in the

rain, snow, wet or damp environments, or immersed in liquid.

Maintain labels and nameplates on the Impact Wrench. These carry impor-

tant information. If unreadable or missing, contact Alltrade for a replacement.

Use with 12 volt systems only.

Performance of this tool may vary depending on varia-

tions in battery power.

INSTALLING / REMOVING SOCKET ON THE ANVIL

When removing the socket or bit from the tool, avoid

contact with skin and use proper protective gloves when grasping the socket,

bit or accessory. Accessories may be hot after prolonged use.

When installing a socket,

align the holes in the side of

the socket with the dent pin.

Press the socket on until the

dent pin engages in the hole.

To remove a socket, pull the

socket off the anvil.

OPERATING THE IMPACT WRENCH

Never tape the trigger switch down to provide continuous high speed. The

tool may fail under such conditions causing fire or personal injury.

Take care when working around a running engine. Run engine in open, well-

ventilated areas ONLY. Running an engine in an enclosed space will allow

build-up of carbon monoxide gas which can lead to dizziness, headaches,

vomiting or death.

Keep hair, clothing, cables or wires out of reach of moving parts while the

engine is running.

FUNCTIONAL DESCRIPTION

CONTROLS AND COMPONENTS:

1. Trigger Switch

2. Forward/Reverse Lever

3. Gear Enclosure

4. Anvil

5. Comfort Non-slip Grip

6. 12V Plug-in (fuse inside)

7. Bubble Level

8. Motor Fan Air Vent

ASSEMBLY

Always disconnect impact wrench from the power source

before installing,adjusting or removing any accessory in this tool, or before

performing maintenance. Failure to do so could result in injury.

9. Dent Pin

10. 12V Power Cord

11. LED Light

ACCESSORIES:

12. 1/2 in. (1.27 cm) Drive Impact

Socket (2)

13. 10A Fuse (2)

DIRECTION SWITCH

The Impact Wrench can move in two

directions: Forward “FWD” for tightening,

Reverse “REV” for loosening.

REMOVING LUG NUTS

Use 12 Volt DC power ONLY. Any other voltage will dam-

age the tool.

1. Park vehicle in a safe outside location

away from moving traffic. Always set

the vehicle parking brake and block the

wheels so the vehicle will not move

while impact wrench is in use. In some

cars, the ignition switch needs to be set

to "ON" to power the cigarette Lighter

outlet.

2. Plug the 12 Volt plug-in into the vehicle’s

12 Volt power supply. Verify that the

impact wrench LED light turns on.

This Impact Wrench does not work immediately like air-

operated or 120V wrenches. The tool must built up inertia before striking a

blow. This hesitation is normal and does not mean that the tool is broken.

3. Pick an impact socket that will fit the wheel lug nut. Press the socket onto the

anvil. NEVER use sockets that are not specifically designed for use with impact

wrenches.

4. Place a jack under the lift point for the wheel to be removed and raise the vehicle.

5. Support the vehicle by placing jack stands at locations recommended by the vehicle

manufacturer.

Do not get under the vehicle without jack stands. Jacks

are not designed to maintain heavy loads for long periods of time.

6. Set the Directional Lever to “REV” and carefully loosen the lug nuts. Remove in

the order recommended by the manufacturer.

7. If the Impact Wrench cannot loosen the lug nut, use a breaker bar (not included)

to break the nut loose before trying again.

8. Remove wheel.

IMPORTANT INFORMATION FOR USE OF IMPACT WRENCH

To maintain the life of your Impact Wrench, it is recommended that you do not contin-

uously remove more than ten lug nuts. After ten lug nuts, let the Impact Wrench cool

down for approximately 10 minutes before attempting to remove additional lug nuts.

In general, after 10 minutes of operation, let the Impact Wrench cool down for approx-

imately 10 minutes before attempting to remove additional lug nuts.

REINSTALLING LUG NUTS

1. Lift wheel back into place.

2. Slide lug nuts onto the wheel bolts in the order recommended by the lug nut

manufacturer.

3. Hand tighten the lug nuts until securely fastened.

4. Do not tighten the lug nuts with the impact wrench. Excessive torque may cause

damage.

5. Use a torque wrench to check that the lug nuts are tightened enough per the man-

ufacturer’s recommendations.

6. Remove jack stands. Carefully lower vehicle and remove the jack. Unplug the

impact wrench and store.

CHANGING THE 12 VOLT FUSE

Always replace fuse with a 10A-250V fuse of the same style.

1. Turn and remove the plastic cap and pull out fuse.

2. Insert new fuse inside the case and reinstall the fuse cap.

FWD

REV

FORWARD/REVERSE LEVER

FWD

REV

FUSE CAP

FUSE

FUSE CASE

IMPACT WRENCH PLUG

VEHICLE 12V OUTLET

3 YEAR LIMITED HOME USE WARRANTY

Express and Exclusive Limited Warranty to Original Retail Buyer

Alltrade Tools LLC (hereinafter "Alltrade") expressly warrants to the original retail

purchaser of the accompanying KAWASAKI power tool and no one else all parts of

the product (except those parts referred to below which are specifically excluded

from such warranty (see Exclusions) to be free from defects in materials and work-

manship for a period of three years from the original date of purchase.

SPECIAL WARRANTY NOTE TO CONTRACTORS AND COMMERCIAL USERS: This

KAWASAKI power tool is offered as a home use tool and carries a HOME USE WAR-

RANTY. This tool is made for home use in the execution of projects and repairs in

and around the home. Use of the tool for COMMERCIAL PURPOSES OR ON A

JOBSITE is not covered under this warranty.

The date of purchase shall be the date of shipment to the original purchaser, or the

date the original purchaser took possession, custody, or control of the product,

whichever occurred first. This warranty shall be null and void if the product or any

component thereof is modified or altered. This warranty does not apply to any other

product and/or component thereof manufactured or distributed by Alltrade, and

does not apply to products and/or components thereof designed, manufactured

and/or assembled by others, for which Alltrade makes no warranties whatsoever.

THERE ARE NO WARRANTIES, WHICH EXTEND BEYOND THE DESCRIPTION ON

THE FACE HEREOF.

WARRANTY PERFORMANCE

By purchasing this product, purchaser expressly acknowledges and agrees that

their sole and exclusive remedy under this warranty shall be strictly limited to the

repair or replacement of any covered nonconforming items or parts thereof provid-

ed that any such nonconforming item and/or part is promptly returned to an author-

ized Service Center within the applicable warranty period, with a written request by

purchaser to repair and/or replace the nonconforming item and/or part. We recom-

mend that you keep the original product packaging in the event you need to ship the

unit. We suggest the package be insured against loss or in transit damage. When

sending your product, include your name, address, phone number, e-mail address,

dated proof of purchase (or copy) and a statement about the nature of the problem.

Warranty coverage is conditioned upon purchaser furnishing Alltrade with adequate

written proof that they are the original purchaser and of the original purchase date.

Parts returned, freight prepaid and insured, will be inspected and, at Alltrade's

option, repaired and/or replaced free of charge if it is found to be defective and sub-

ject to warranty. Alltrade retains the sole discretion to determine whether any item

or part is nonconforming and, if so, whether the item and/or part will be repaired

and/or replaced. If the unit is repaired, new or reconditioned replacement parts may

be used. If Alltrade chooses to replace the product, it may replace it with a new or

reconditioned of the same or comparable design. The repaired or replaced unit will

ACCESSORIES

Use only accessories that are recommended by the manufacturer for your model.

Accessories that may be suitable for one tool may create a risk of injury when used

on another tool.

MAINTENANCE AND CLEANING

Use only mild soap and a damp cloth to clean the tool. Never let any liquid get

inside the casing. Never immerse any part of the tool in a liquid. Always keep the

ventilation openings clear.

Always store the impact wrench inside the case in a dry safe location. Keep away

from caustic fluids, water, oil, grease, gasoline or any other substance that may

damage the tool.

Visually inspect for cracks or bent, loose, missing parts before each use.

The impact wrench should only be repaired by an authorized service facility.

Change fuse when necessary.

SPECIFICATIONS

Voltage 12V

Drive Size 1/2 in. (12.7 mm) Square

Maximum Torque 280 ft.lbs.

No Load Speed Range 2500 - 5500 RPM

OTHER CONSUMER DO-IT-YOURSELF (DIY) TOOLS

Alltrade offers a full range of Kawasaki tools that make DIY jobs easy. If you would

like further information on the following products, please contact Alltrade Customer

Service Department at 1-800-590-3723.

Cordless Drills/Screwdrivers

Impact Wrenches

Sanders

Jigsaws

Circular Saws

Angle Grinders

Reciprocating Saws

Routers

Rotary Tools

Corded and Cordless Multi-Purpose Tools

Wide Range of Accessories and more

CAUSE OF ACTION ARISING THEREFROM OR BASED THEREON. PURCHASER'S

SOLE AND EXCLUSIVE REMEDY IS AS STATED ABOVE.

EXCLUSION AND DISCLAIMER OF ALL IMPLIED WARRANTIES, INCLUDING THE

IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE. NO WARRANTY, ORAL OR WRITTEN, OTHER THAN THE WARRANTY

LISTED HEREIN IS MADE WITH REGARD TO THIS PRODUCT. ALL WARRANTIES

AND/OR IMPLIED WARRANTIES, GUARANTIES AND/OR REPRESENTATIONS BY

ALLTRADE AND/OR ITS REPRESENTATIVE(S) REGARDING THE DESIGN, MANU-

FACTURE, PURCHASE, USE AND/OR OPERATION OF THE PRODUCT OR ANY COM-

PONENT THEREOF SOLD HEREUNDER, REGARDLESS OF WHETHER ANY SUCH

WARRANTY, GUARANTY AND/OR REPRESENTATION, WRITTEN OR ORAL, ARISES

BY OPERATION OF LAW AND/OR EQUITY AND/OR BY ANY ACT OR OMISSION OF

ALLTRADE AND/OR ITS REPRESENTATIVES. PURCHASER KNOWINGLY AND

WILLINGLY WAIVES ANY AND ALL SUCH WARRANTIES AND RIGHTS, CLAIMS

AND/OR CAUSES OF ACTION ARISING THEREFROM OR BASED THEREON.

PURCHASER'S SOLE AND EXCLUSIVE REMEDY IS AS STATED ON PRECEDING PAGES.

LIMITATIONS OF LIABILITY

IN NO EVENT SHALL ALLTRADE AND/OR ITS REPRESENTATIVE(S) BE LIABLE FOR

INDIRECT, INCIDENTAL, SPECIAL AND/OR CONSEQUENTIAL DAMAGES OF ANY

KIND ARISING OUT OF OR RELATED TO, DIRECTLY OR INDIRECTLY, ANY BREACH

OR PROVISION OF ANY AGREEMENT BETWEEN ALLTRADE AND/OR ITS REPRE-

SENTATIVE(S) AND PURCHASER, AND WARRANTY HEREUNDER, AND/OR THE

EXISTENCE, DESIGN, MANUFACTURE, PURCHASE, USE AND/OR OPERATION OF

ANY ITEM(S) SOLD HEREUNDER EVEN IF ALLTRADE AND/OR ITS REPRESENTA-

TIVE(S) HAS BEEN ADVISED OF THE POSSIBILITY OF ANY SUCH DAMAGES. IN NO

EVENT, WHETHER BECAUSE OF A BREACH OF CONTRACT, WARRANTY, TORT

(INCLUDING NEGLIGENCE) OR OTHERWISE, SHALL ALLTRADE'S AND/OR ITS

REPRESENTATIVE (S) LIABILITY EXCEED THE PRICE OF THE PRODUCT. All LIA-

BILITY CONNECTED WITH THE USE OF THIS PRODUCT SHALL TERMINATE UPON

THE EXPIRATION OF THE WARRANTY PERIODS SPECIFIED ABOVE.

LIMITATIONS ON WARRANTY DISCLAIMERS

Some states do not allow limitations on how long an implied warranty lasts and

some states do not allow the exclusion or limitation of the incidental or consequen-

tial damages, so part or all of the above limitations or exclusions may not apply to

you. This warranty gives you specific legal rights, and you may also have other

rights, which vary from state to state.

If your product is not covered by this warranty, please call our Customer Service

Department at 1-800-590-3723 for general repair information, and charges and the

location of your nearest authorized service facility.

be warranted under the terms of the remainder of the one year warranty period; cov-

ered defective parts not subject to normal wear and tear or other exclusions will be

repaired or replaced, at Alltrade's option. During the warranty period, Alltrade will

be responsible for the return shipping charges. Alltrade's repair and/or replacement

of any nonconforming item and/or part thereof shall constitute fulfillment of all obli-

gations to the purchaser. Alltrade shall not be responsible or liable for any expense,

including freight charges, or repairs made outside Alltrade's facility or an Alltrade

designated service, unless expressly agreed to by Alltrade in writing. Under no cir-

cumstances shall Alltrade bear any responsibility for loss of the unit, loss of time or

rental, inconvenience, commercial loss, or consequential damages.

For the location of an Authorized Service Center nearest you, please call customer

service at 1-800-590-3723.

This warranty does not cover parts damaged due to normal wear, abnormal condi-

tions, misapplication, misuse, abuse, accidents, operation, improper storage, or

freight damage. Parts damaged or worn by operation in dusty environments are not

warranted. Failure to follow recommended operating and maintenance procedures

also voids warranty.

DAMAGE TO THE PRODUCT RESULTING FROM TAMPERING, ACCIDENT, ABUSE,

NEGLIGENCE, FAILURE TO FOLLOW INSTRUCTIONS, UNAUTHORIZED REPAIRS

OR ALTERATIONS, DAMAGE WHILE IN TRANSIT TO OUR SERVICE FACILITY, USE

OF UNAPPROVED OR IMPROPER ATTACHMENTS OR ACCESSORIES, OR OTHER

CAUSES UNRELATED TO PROBLEMS WITH MATERIAL OR WORKMANSHIP ARE

NOT COVERED BY THIS WARRANTY.

Alltrade will not be liable for the following: labor charges, loss or damage resulting

from improper operation, maintenance or repairs made by other persons; pre-deliv-

ery services such as assembly, oil and lubricants, and adjustment; maintenance

services that are normally required to maintain the product.

The use of other than genuine Trades Pro Repair Parts will VOID the warranty.

WARRANTY DISCLAIMERS

EXCLUSION AND DISCLAIMER OF ALL OTHER EXPRESS WARRANTIES, GUAR-

ANTIES AND/OR REPRESENTATIONS, EXCEPT FOR THE LIMITED WARRANTY

PROVIDED HEREIN, ALL OTHER EXPRESS WARRANTIES, GUARANTIES, AND/OR

REPRESENTATIONS BY ALLTRADE AND OR ITS REPRESENTATIVE(S) REGARDING

THE DESIGN, MANUFACTURE, PURCHASE, USE AND/OR OPERATION OF THE

PRODUCT OR ANY COMPONENT THEREOF SOLD HEREUNDER, REGARDLESS OF

WHETHER ANY SUCH WARRANTY, GUARANTY AND/OR REPRESENTATION,

WRITTEN OR ORAL, ARISES BY OPERATION OF LAW AND/OR EQUITY AND/OR BY

ANY ACT OR OMISSION OF ALLTRADE AND/OR ITS REPRESENTATIVE(S), OR THE

BUYER, ARE HEREBY EXPRESSLY EXCLUDED AND DISCLAIMED BY ALLTRADE

AND/OR ITS REPRESENTATIVES. PURCHASER KNOWINGLY AND WILLINGLY

WAIVES ANY AND ALL SUCH WARRANTIES AND RIGHTS, CLAIMS AND/OR

Kawasaki 841337 User guide

Brand: Kawasaki

Model: 841337

Category: Power tools

Type: User guide

Download PDF

report

Kawasaki 841337 User guide

Kawasaki 841337 User guide

Related papers

Other documents