Xantech Computer 598-00 User manual

Category
Security device components
Type
User manual

This manual is also suitable for

1
Controllers
INSTALLATION INSTRUCTIONS
The 598 is an eight button, momentary, dry contact keypad. It is normally used in conjunction with the
Xantech 590 Programmable Controller as shown in the illustration below.
Requires 9-conductor cable, as shown. Use 24 gauge, stranded or solid wire, up to lengths of 5000'.
Two 598's may be used to provide momentary switch closures for all 16 of the 590 input terminals.
Two or more 598's may also be wired in parallel to the same terminals on the 590 where control from more
than one room or area is required.
The 598 fits into a standard single-gang J-box. 598's may also be used side-by-side in two (or more) gang
J-boxes.
A legend cutout sheet (included) contains typical component function command icons for button
identification.
598-00
EIGHT BUTTON DRY CONTACT KEYPAD
C
1
2
3
4
5
6
7
8
1
12VDC
12VDC
1234
BANK
RES DEL SEQ PGM
+
234567891011 141516OG
–+
12 13
Emitter, Connecting Block, etc.
To 120 V AC
Unswitched
786-00
Power
Supply
White Striped
Side (output)
Wire size typically AWG 20-24
Model 590
(rear panel)
Model 598
Key Pad
(rear view)
ON
Ground or ""
return wires.
+12V DC
5-14-99
  • Page 1 1

Xantech Computer 598-00 User manual

Category
Security device components
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI