Snell IC-D7 User manual

Brand: Snell

Model: IC-D7

Category: Soundbar speakers

Type: User manual

Snell IC-D7 is a high-output LCR loudspeaker designed to fit into furniture and millwork, providing clean, impactful sound with an effortless and “airy” soundstage. It features a 6.5-inch D’Appolito Array with twin woofers for extended bass and a 1-inch silk dome tweeter for a large sweet spot. The IC-D7 is suitable for use as a left, center, or right speaker, and can be mixed and matched with other Snell models for a cohesive sound system.

FOR BUILT-IN CABINETS, A UTILITY VERSION OF

THE ACCLAIMED D7 TOWER

The unique cabinet design, placement switch and wide

dispersion tweeter of the IC D7 bring the performance of

a freestanding high-end tower to an in-cabinet bookshelf

enclosure. Conventional bookshelf loudspeakers sound

“chesty” and image poorly when used in in-cabinet

applications. The IC D7 is a 6.5-inch, D’Appolito Array,

into furniture and millwork, and, is tuned to compensate

for the sonic problems that these cabinet boundaries

cause. The twin 6.5-inch long throw woofers provide extended bass and plenty of output, while the 1-inch low-

resonance, silk dome tweeter enables a large sweet spot for better stereo imaging. The IC D7 uses the same

components as the Snell D7 Tower and IW D7 in-wall monitor, mounted in a robust, texture-painted enclosure. This

high output LCR can be used for Left, Center and Right or mixed and matched with these two siblings to provide clean,

impactful sound with an effortless and “airy” soundstage… perfect for music and movies.

Design:

Acoustic Suspension

D’Appolito array

Frequency Response

62Hz-20kHz ± 3dB

Sensitivity

[1Watt (2.83v) @ tm]

90 dB

Impedance

Nominal 4 Ohms

Maximum Output

110 dB

Recommended Power

50 Watts minimum

250 Watts maximum

Tweeter

1-inch SEAS silk dome

Woofer

Two 6.5-inch Copolymer cone,

6mm Excursion

Crossover Frequency

2.2 kHz

Crossover

Discrete tweeter, and woofer

circuit boards. Time alignment

and coherency are achieved

through the transition region from

driver to driver. Each crossover is

individually tuned by our

technicians to ± 0.5db of the

Master Reference.

Boundary compensation

"Normal" – When placed on

stands away from wall.

"Boundary"– When placed on

shelf or near wall.

Wiring

Bi-amp, bi-wire ready

Connections

5-way satin, nickel-plated, brass

terminals, accepts 5/16 - inch

spades, pins, banana plugs and

bare wire to 12 gauge.

Cabinet Construction

Hardwood veneer over 3/4-inch

MD Panels. 3/4 -inch textured

painted.

Grille

Black cloth over MDF frame.

Finishes

Textured black paint. Can

be ordered in most wood

and paint finishes.

Weight

30 lbs.

Manufactured in the USA by Snell Acoustics, Peabody MA 01960 • www.snellacoustics.com • 978-538-6262 • © Snell Acoustics, Inc • All specifications subject to change without notice.

IC-D7

Premier Series

Like all Snell loudspeakers, each IC-D7 is hand tuned for natural imaging and sonic depth.

Application Alternatives: System Suggestions:

D7 In Room

IW-D7 In Wall

SR7 Surround

IC Basis 300 Sub

Dimensions:

• 19.5” Wide • 7.75” High • 11” Deep