Audiovox Automobile Accessories User manual

Audiovox
Brand
Audiovox
Model
Automobile Accessories
Category
Motor vehicle electronics
Type
User manual

Audiovox Automobile Accessories

The Audiovox Automobile Accessories device is a versatile and feature-rich product that can greatly enhance your driving experience. With its advanced capabilities, you can enjoy a wide range of functionalities that make your journeys more convenient, comfortable, and enjoyable. Some of the key features of the device include:

  • Electric Window Control: Effortlessly operate your vehicle's windows with the touch of a button. This feature provides added convenience, especially when driving in inclement weather or when you need to quickly ventilate the car.

Audiovox Automobile Accessories

The Audiovox Automobile Accessories device is a versatile and feature-rich product that can greatly enhance your driving experience. With its advanced capabilities, you can enjoy a wide range of functionalities that make your journeys more convenient, comfortable, and enjoyable. Some of the key features of the device include:

  • Electric Window Control: Effortlessly operate your vehicle's windows with the touch of a button. This feature provides added convenience, especially when driving in inclement weather or when you need to quickly ventilate the car.
Remove door panel.
~,;~,"I,i::-' sure the centering adhesive is firmly applied to the panel
3
0
\
MANUALL y CHECK
THE MOVEMENT OF THE WINDOW
Adjust the registers or guides If the window does not operate freely
0
OPTIONAL OPERA TION:
A .IN ORDER TO USE THE SMALLEST CAP ON SOME VEHICLES, IT MA Y BE NECESSARY TO
MOVE BACK THE WINDOW REGULATOR ASSEMBLY.
B .AFTER REMOVING ORIGINAL BOLTS FROM THEIR SEATS, REFER TO THE TABLE BELOW
TO CHOOSE SUITABLE SPACERS AND BOL TS (SUPPLIED IN KIT NO.2).
KIT NO.2
4
C .INSERT SPACERS BETWEEN MANUAL MECHANISM AND DOOR-PANEL
Check that the bolts of the window assembly are tight
KIT NO.3
From Kit No.3, choose the correct adaptor for the model of vehicle. See adaptor Table
below.
N. 1 ALFA ROMEO -AUTOBIANCHI -BEOFORO -OAF
OATSUN -FIAT -LANCIA -MERCEOES -NISSAN
OPEL-PORSCHE-SUBARU
N. 7 OPEL
N. 8 DAIHATSU -MITSUBISHI -TOYOTA -SUZUKI
CHEVROLET -G.M.
N. 2 ARO -CITROEN -PEUGEOT -RENAUL T -SEAT
TALBOT
N. 9 HONDA
N.3 AUDI -BMW -FIAT -FORD (EUROPE)
PORSCHE -VOlKSWAGEN -VOlVO
N.10 MAZDA
N. 11 ISUZU
N. 4 AUSTIN ROVER
N. 12 FORD (U.S.A.)
N. 5 VAUXALL -JAGUAR -BEDFORD -ROVER
N. 13 DODGE. CHRYSLER
N. 6 FORD (UK)
Take caution in removing adaptor from Kit. Do not twist-off.
If the handle is fixed with a screw, use it to fix the adaptor
0
INSERT GEAR SLEEVE
INTO THE TRANSMISSION
t
J
i
li
"
KIT NO.4
B
-
,...
,'-..
""'t,{
...
I
~
"
~
Geared sleeve to be inserted towards inside of vehicle
A) Insertion from the red marked side.
B) Insertion from the opposite side of the red mark.
Cear Conversion
~
t
t
'!
l
;c
"
A) Wrong: too long.
B) Wrong: too short.
C) Right: length of geared sleeve and pivot are the same.
If a standard is not available for your car, gear H = 37 should be used after cutting it to
match regulator pivot.
6
B
A) Remove the screws.
B) Rotate the geared motor to the required position
C) Retighten the screws in their seats.
~
~
@
~
~
Drill door panel to hook-up springs,
IMPORTANT:
i
I
~
~
I
~
The power cable for the motor must always be positioned downwards
~
~
.,
..
;:;
~.
A
B c
K'T,1!9"1. ~ ,
, ., .
, ./
' I
.(~l ; ,
.I
.\. .('(I
..'f('(i' (
..t. (. (i. .b'
..~'(.(,.; ..
.\. ...~.
.(1~ :~.. .
J;'A;,<1 <1 ,
,
~
A) Fastening with two brackets.
B) Fastening with brackets and springs.
C) Fasten geared motor behind door panel with one bracket
8
f
~
~ /.
~
/
Take springs and wire clip out of KIT No
1) Spring.
2) Wire clip.
1
Hook up springs and lock hooks
IN CASE THE MOTOR, OR PARTS OF IT, ARE IN DIRECT CONTACT WITH ANY
METAL PARTS, THE SUPPLIED PADDING SHOULD BE USED AS SHOWN BELOW.
9
~
NO.3
No.1
No.2
No.3
Small.
Medium
Larg.
The grommet cap locks to panel by means of a
retainer ring
KIT NO.1
I
r
I
1
in order to be locked
1
3
To choose the proper grommet cap, follow this procedure:
-Insert grommet cap no.1 (SMALL) into the panel, if it does not come through, try
no.2 (MEDIUM) and then, if necessary, no.3 (LARGE).
-
I
B
No.1
NO.1
MAX
5/32'1
NO.1
YES!
SMALL (wrong: too short).
MEDIUM (wrong: too short)
LARGE (yes).
A) No.1
No.2
No.3
12
1
--.:-
-
L:"1 , !
~.
'""U --'
The grommet has to come through the door casing at least 5/32
with the retainer ring.
UNIVERSAL ELECTRIC WINDOWS
WITHOUT CLUTCH
ART. 33000013
[!!J
FIT CAP ON DOOR PANEL
Fit the Cap on the grommet and fit the panel on the door
NOTE!
When the regulator pivot does not come out from the panel (photo A and B) you can use
cap No. O for a better appearance.
INSTALLATION EXAMPLE FOR ELECTRIC POWER WINDOWS
IN SOME CARS IN THE U.S.
.
BUICK CENTURY (4 Doors) front left
-insert gear H 15 (insert from red marked side)
-adaptor No.8
-turn transmission side of geared motor towards inside of car
-affix geared motor with springs
-grommet No.1
-cap No.1
BUICK CENTURY (4 Doors) rear right
CHEVROLET FULL SIZE mod. '88 front left
-insert gear H 15 (insert from red marked side)
-adaptor No.8
-turn transmission side of geared motor towards inside of car
-affix geared motor with springs
-grommet No.1
-cap NO.1
FORD MUST ANG front right
-adjust bracket on transmission
-insert gear H 15 (insert from red marked side)
-adaptor No.12
-apply paddings to geared motor
-turn transmission side of geared motor towards inside of car
-affix geared motor with two brackets
-grommet No.1
-cap No.1
-
14
-adjust bracket on transmission shortened 1"
-insert gear H 15 (insert from red marked side)
-adaptor No.8
-turn transmission side of geared motor towards inside of car
-affix geared motor with plastic fastener
-grommet No.1
-cap No.1
FORD TEMPO front right
-adjust bracket on transmission
-rotate geared motor 1800 on transmission
-insert gear H 15 (insert from red marked side)
-adaptor No.12
-apply paddings to geared motor
-turn transmission side of geared motor towards inside of car
-affix geared motor with bracket shortened 2.2"
-grommet No.1
-cap No.1
HONDA ACCORD front right
-adjust bracket on transmission
-insert gear H 15 (insert from red marked side)
-adaptor No.9
-apply paddings to geared motor
-turn transmission side of geared motor tow~rds inside of car
-affix geared motor with plastic fastener .
-grommet No.1
-cap No.2
* Bend door panel in area where cables cross. Affix cables to
door panel with plastic fastener.
* Care should be taken to not damage the geared motor with
door stopper
HONDA CIVIC CRX front right
-adjust bracket on transmission
-rotate geared motor 90° on transmission
-insert gear H 15 (insert from red marked side)
-adaptor No.9
-apply paddings to grill of geared motor
-turn transmission side of geared motor towards inside of car
-affix geared motor with bracket (affix support arm screw)
-grommet No.1
-cap No.1
MAZDA 626 4 Doors (U.S.) mod. '89 front right
15
-adjust bracket on transmission shortened 1 "
-rotate geared motor 900 on transmission
-insert gear H 15 (insert from red marked sicte)
-adaptor No.10
-turn transmission side of geared motor towards inside of car
-affix geared motor with two brackets after having shortened
one off 1"
-grommet No.1
-cap No.1
II\
.~Ci
~ =~. .',
.
-
O '., ~c
1(
\~
..
.'.
ki
DODGE CARA V AN front left
-shorten bracket on transmission 1.6"
-rotate geared motor 900 on transmission
-insert gear H 15 (insert from red marked side)
-adaptor No.13
-turn transmission side of geared motor towards inside of car
-affix geared motor with two brackets shor1ened 2.2"
-grommet No.1
-cap No.1
CHEVROLET/GMC S-10/15 PICKUP front left
-shorten bracket on transmission 1.6"
-gear H 15 (insert from red marked side)
-adaptor No.8
-apply paddings to geared motor
-turn transmission side of geared motor towards inside of car
-affix geared motor with two brackets
-grommet No.1 (may need to use with 2.9" plastic round
washer)
-cap No.1
'II~.
~---
I i
~
;-,=;:-f=.i
111;
..-
I
~
'.
\~\...t Ii
c
\~\.
~
) 111
'0.
FORD AEROST AR front left
-adjust bracket on transmission
-insert gear H 15 (insert from red marked side)
-adaptor No.12
-turn transmission side of geared motor towards inside of car
-affix geared motor with two brackets
-grommet No.1
-cap No.1
FORD RANGER mod. '89 front right
17
~--'(l1
oa. .
II'-~~'/.. J1j]
~~
~~~
-Insert gear H 15 (insert from red marked side)
-adaptor No.12
-turn transmission side of geared motor towards
-affix geared motor with two brackets after having shortened
one off 1"
-grommet No.1
-cap No.1
ELECTRICAL CIRCUIT: 3 SWITCH WITH 6 CONTACTS AND SEPARATE LIGHT
* Use original wiring, Art. 33020010 complete with 25 Amp. fuse.
~
~
~,
f:
20
~
::
:I
FUSE 50 Amp
21
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

Audiovox Automobile Accessories User manual

Audiovox
Brand
Audiovox
Model
Automobile Accessories
Category
Motor vehicle electronics
Type
User manual

Audiovox Automobile Accessories

The Audiovox Automobile Accessories device is a versatile and feature-rich product that can greatly enhance your driving experience. With its advanced capabilities, you can enjoy a wide range of functionalities that make your journeys more convenient, comfortable, and enjoyable. Some of the key features of the device include:

  • Electric Window Control: Effortlessly operate your vehicle's windows with the touch of a button. This feature provides added convenience, especially when driving in inclement weather or when you need to quickly ventilate the car.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents