Link electronic DigiFlex 1132 User manual

Brand
Link electronic
Model
DigiFlex 1132
Category
Video line amplifiers
Type
User manual

Link electronic DigiFlex 1132

The device you have purchased is a serial distribution amplifier, which means it can take a single input and distribute it to multiple outputs. It is compatible with various SDI standards, including composite SDI, SD SDI, and HD SDI. The maximum number of outputs depends on the rear cell you choose, with options for four or eight outputs. The 1132 automatically equalizes and re-clocks the incoming signal, ensuring that the output signals are of high quality even over long cable runs.

The front module of the 1132 has LED indicators that provide information about the input signal. These indicators include lock detect, loss of signal, SD/HD status, and data rate. The rear module also has LED indicators that indicate the status of each output.

Link electronic DigiFlex 1132

The device you have purchased is a serial distribution amplifier, which means it can take a single input and distribute it to multiple outputs. It is compatible with various SDI standards, including composite SDI, SD SDI, and HD SDI. The maximum number of outputs depends on the rear cell you choose, with options for four or eight outputs. The 1132 automatically equalizes and re-clocks the incoming signal, ensuring that the output signals are of high quality even over long cable runs.

The front module of the 1132 has LED indicators that provide information about the input signal. These indicators include lock detect, loss of signal, SD/HD status, and data rate. The rear module also has LED indicators that indicate the status of each output.

1000 SERIES DIGIFLEX
Mounting Frame Options
1000 - Single Power Supply, Holds 11 Modules
1000/2 - Dual Power Supply, Holds 10 Modules
7200 - Mounting Frame, Holds 1 Module
MADE IN THE USA
LINK ELECTRONICS, INC.
HD/SD-SDI DIGITAL DISTRIBUTION AMPLIFIER
DigiFlex 1132
FEATURES
m Composite & Component SDI
m SMPTE 259M, 344M, 292M compliant
m Serial Digital Input
m HD Input
m Eight or Four Serial Outputs
m Fault Indication
m Automatic Equalization and Re-clocking
The LINK 1132 DigiFlex serial distribution amplifier
restores the incoming signal to its proper
amplitude. The signal is reshaped with automatic
equalization, and DC restoration. The 1132 ‘s
maximum equalized length for cable for SD is
300m at 270Mb/s, and for HD, 100m at 1.485Gb/s.
Eight outputs are provided on a removable rear cell
1033, and four outputs are provided on the 1032
rear cell. An LED at the front edge of the front
module, and one on the rear module indicate a
Loss of Signal.
A rear I/O module must be selected for the specific
front signal module. The signal module and rear
I/O module with the flexibility of the frame place
virtually no limits on the versatility of the DigiFlex
1000 system.
The input signal can be 143Mb/s, 177Mb/s,
270Mb/s, 360Mb/s, 540Mb/s, and
1.4835/1.485Gb/s standards. The front module has
LED's that tell if the input signal has locked, and
the data rate that it is locked.
The 1000 series DigiFlex modules are compact
designs that allow eleven modules to mount in the
1000 frame and ten modules with a redundant
power supply. Any 1000 series module will operate
in the 1000 frame in any configuration, audio or
video, digital/analog, generators or test modules.
Backed by Link's 10-year warranty, the 1132 will
provide years of outstanding performance.
LINK ELECTRONICS, INC. g 2137 Rust Avenue g Cape Girardeau, MO 63703-7668
Phone 573 334 4433 g FAX 573 334 9255
1032 REAR
1033 REAR
Rear Cell I/O
0. HD Input
1. HD Out
2. HD Out
3. HD Out
4. HD Out
5. HD Out
6. HD Out
7. HD Out
8. HD Out
1132/020108
1033 REAR
1032
Rear Cell I/O
0. HD Input
1. HD Out
2 HD Out
3. HD Out
4. HD Out
DIGIFLEX 1132 SERIAL DIGITAL DISTRIBUTION AMPLIFIER
SERIAL DIGITAL VIDEO INPUT:
Number of Inputs:
...........................................................................
1
Connectors: ............................................................................BNC
Standards:
Composite SDI: .................................................................. 143Mb/s
SD SDI: ...............................................177Mb/s, 270Mb/s, 360Mb/s, 540Mb/s
SD HD: ..................................................................1.4835/1.485Gb/s
Impedance:............................................................................. 75S
Return Loss:.......................................................................... >15dB
Signal Level ................................................................... 800mV ± 10%
Input Cable Length Max:
SD: ..................................................................... 300m at 270Mb/s
HD: ....................................................................100m at 1.485Gb/s
DIGITAL OUTPUTS:
Number of Outputs:..................................................................... 4 or 8
Connectors: ............................................................................BNC
Standards: ....................................................................Same as input
Impedance:............................................................................. 75S
Return Loss:.......................................................................... >15dB
Signal Level: ................................................................... 800mV ± 10%
Rise & Fall Time:
SD: ........................................................................... 800ps Max
HD: ........................................................................... 220ps Max
Overshoot: ................................................................... 8% of Amplitude
Additive Jitter:
SD at 270Mb/s: ............................................................ 25ps p-p, typical
HD at 1.485Gb/s: .......................................................... 15ps p-p, typical
FRONT MODULE INDICATORS:
Lock Detect: ...................................................................... Green LED
Loss of Signal: ......................................................................Red LED
SD: .............................................................................. Green LED
HD: ..............................................................................Yellow LED
Data Rates:.....................................................................Green LED(6)
Cable Length Indicator: ...................... Only used for SMPTE 259M standards, Green LED(4)
ENVIRONMENTAL:
Temperature: ..............................................................0° to 50°C Ambient
Humidity: .........................................................10% to 90% non-condensing
Power: .............................................................................4.2 Watts
MECHANICAL:
Height:...................3.2 Inch
Width:....................1.0 Inch
Depth:....................10 Inch
Weight:...................7.25 Oz
PROFESSIONAL SERIES--
modular system products--by LINK
LINK ELECTRONICS, INC. g 2137 Rust Avenue g Cape Girardeau, MO 63703-7668
Phone 573 334 4433 g FAX 573 334 9255
  • Page 1 1
  • Page 2 2

Link electronic DigiFlex 1132 User manual

Brand
Link electronic
Model
DigiFlex 1132
Category
Video line amplifiers
Type
User manual

Link electronic DigiFlex 1132

The device you have purchased is a serial distribution amplifier, which means it can take a single input and distribute it to multiple outputs. It is compatible with various SDI standards, including composite SDI, SD SDI, and HD SDI. The maximum number of outputs depends on the rear cell you choose, with options for four or eight outputs. The 1132 automatically equalizes and re-clocks the incoming signal, ensuring that the output signals are of high quality even over long cable runs.

The front module of the 1132 has LED indicators that provide information about the input signal. These indicators include lock detect, loss of signal, SD/HD status, and data rate. The rear module also has LED indicators that indicate the status of each output.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents