LG UV12H.NJ1 User manual

P/NO : MFL42619123

www.lg.com

OWNER’S MANUAL

AIR CONDITIONER

Please read this manual carefully before operating

your set and retain it for future reference.

TYPE : Ceiling suspended Air Conditioner

ENGLISH ITALIANO ESPAÑOL

FRANÇAIS

DEUTSCH

РУССКИЙ ЯЗЫК

PORTUGUESE

NEDERLANDS

P/NO.:MFL62085012

2

TIPS FOR SAVING ENERGY

ENGLISH

TIPS FOR SAVING ENERGY

Here are some tips that will help you minimize the power consumption when you use the air

conditioner. You can use your air conditioner more efficiently by referring to the instructions

below:

• Do not cool excessively indoors. This may be harmful for your health and may consume more

electricity.

• Block sunlight with blinds or curtains while you are operating the air conditioner.

• Keep doors or windows closed tightly while you are operating the air conditioner.

• Adjust the direction of the air flow vertically or horizontally to circulate indoor air.

• Speed up the fan to cool or warm indoor air quickly, in a short period of time.

• Open windows regularly for ventilation as the indoor air quality may deteriorate if the air con-

ditioner is used for many hours.

• Clean the air filter once every 2 weeks. Dust and impurities collected in the air filter may block

the air flow or weaken the cooling / dehumidifying functions.

For your records

Staple your receipt to this page in case you need it to prove the date of purchase or for warranty

purposes. Write the model number and the serial number here:

Model number :

Serial number :

You can find them on a label on the side of each unit.

Dealer’s name :

Date of purchase :

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.

Always comply with the following precautions to avoid dangerous situations and ensure peak

performance of your product

WARNING

It can result in serious injury or death when the directions are ignored

CAUTION

It can result in minor injury or product damage when the directions are ignored

WARNING

• Installation or repairs made by unqualified persons can result in hazards to you and others.

• The product shall be installed according to the Wiring regulations of the corresponding coun-

try.

• The information contained in the manual is intended for use by a qualified service technician

familiar with safety procedures and equipped with the proper tools and test instruments.

• Failure to carefully read and follow all instructions in this manual can result in equipment mal-

function, property damage, personal injury and/or death.

Installation

• Do not use a defective or underrated circuit breaker. Use this appliance on a dedicated circuit.

There is risk of fire or electric shock.

• For electrical work, contact the dealer, seller, a qualified electrician, or an Authorized Service

Center. Do not disassemble or repair the product. There is risk of fire or electric shock.

• Always ground the product. There is risk of fire or electric shock.

• Install the panel and the cover of control box securely. There is risk of fire or electric shock.

• Always install a dedicated circuit and breaker. Improper wiring or installation may cause fire or

electric shock

• Use the correctly rated breaker or fuse. There is risk of fire or electric shock.

• Do not modify or extend the power cable. There is risk of fire or electric shock.

• Do not install, remove, or re-install the unit by yourself (customer). There is risk of fire, electric

shock, explosion, or injury.

• Be cautious when unpacking and installing the product. Sharp edges could cause injury. Be

especially careful of the case edges and the fins on the condenser and evaporator.

• For installation, always contact the dealer or an Authorized Service Center. There is risk of

fire, electric shock, explosion, or injury.

• Do not install the product on a defective installation stand. It may cause injury, accident, or

damage to the product.

• Be sure the installation area does not deteriorate with age. If the base collapses, the air condi-

tioner could fall with it, causing property damage, product failure, and personal injury.

• Do not let the air conditioner run for a long time when the humidity is very high and a door or

a window is left open. Moisture may condense and wet or damage furniture.

!

3

ENGLISH

4

IMPORTANT SAFETY INSTRUCTIONS

ENGLISH

Operation

• Take care to ensure that power cable could not be pulled out or damaged during operation.

There is risk of fire or electric shock.

• Do not place anything on the power cable. There is risk of fire or electric shock.

• Do not plug or unplug the power supply plug during operation. There is risk of fire or electric

shock.

• Do not touch(operate) the product with wet hands. There is risk of fire or electrical shock.

• Do not place a heater or other appliances near the power cable. There is risk of fire and elec-

tric shock.

• Do not allow water to run into electric parts. It may cause There is risk of fire, failure of the

product, or electric shock.

• Do not store or use flammable gas or combustibles near the product. There is risk of fire or

failure of product.

• Do not use the product in a tightly closed space for a long time. Oxygen deficiency could

occur.

• When flammable gas leaks, turn off the gas and open a window for ventilation before turn the

product on. Do not use the telephone or turn switches on or off. There is risk of explosion or

fire

• If strange sounds, or small or smoke comes from product. Turn the breaker off or disconnect

the power supply cable. There is risk of electric shock or fire.

• Stop operation and close the window in storm or hurricane. If possible, remove the product

from the window before the hurricane arrives. There is risk of property damage, failure of

product, or electric shock.

• Do not open the inlet grill of the product during operation.(Do not touch the electrostatic filter,

if the unit is so equipped.) There is risk of physical injury, electric shock, or product failure.

• When the product is soaked (flooded or submerged), contact an Authorized Service Center.

There is risk of fire or electric shock.

• Be cautious that water could not enter the product. There is risk of fire, electric shock, or

product damage.

• Ventilate the product from time to time when operating it together with a stove, etc. There is

risk of fire or electric shock.

• Turn the main power off when cleaning or maintaining the product. There is risk of electric

shock.

• When the product is not be used for a long time, disconnect the power supply plug or turn off

the breaker. There is risk of product damage or failure, or unintended operation.

• Take care to ensure that nobody could step on or fall onto the outdoor unit. This could result

in personal injury and product damage.

IMPORTANT SAFETY INSTRUCTIONS

CAUTION

Installation

• Always check for gas (refrigerant) leakage after installation or repair of product. Low refrigerant lev-

els may cause failure of product.

• Install the drain hose to ensure that water is drained away properly. A bad connection may cause

water leakage.

• Keep level even when installing the product. To avoid vibration or water leakage.

• Do not install the product where the noise or hot air from the outdoor unit could damage the neigh-

borhoods. It may cause a problem for your neighbors.

• Use two or more people to lift and transport the product. Avoid personal injury.

• Do not install the product where it will be exposed to sea wind (salt spray) directly. It may cause cor-

rosion on the product. Corrosion, particularly on the condenser and evaporator fins, could cause

product malfunction or inefficient operation.

Operation

• Do not expose the skin directly to cool air for long periods of time. (Don't sit in the draft.) This could

harm to your health.

• Do not use the product for special purposes, such as preserving foods, works of art, etc. It is a con-

sumer air conditioner, not a precision refrigeration system. There is risk of damage or loss of prop-

erty.

• Do not block the inlet or outlet of air flow. It may cause product failure.

• Use a soft cloth to clean. Do not use harsh detergents, solvents, etc. There is risk of fire, electric

shock, or damage to the plastic parts of the product.

• Do not touch the metal parts of the product when removing the air filter. They are very sharp! There

is risk of personal injury.

• Do not step on or put anyting on the product. (outdoor units) There is risk of personal injury and fail-

ure of product.

• Always insert the filter securely. Clean the filter every two weeks or more often if necessary. A dirty

filter reduces the efficiency of the air conditioner and could cause product malfunction or damage.

• Do not insert hands or other objects through the air inlet or outlet while the product is operated.

There are sharp and moving parts that could cause personal injury.

• Do not drink the water drained from the product. It is not sanitary and could cause serious health is-

sues.

• Use a firm stool or ladder when cleaning or maintaining the product. Be careful and avoid personal

injury.

• Replace the all batteries in the remote control with new ones of the same type. Do not mix old and

new batteries or different types of batteries. There is risk of fire or explosion

• Do not recharge or disassemble the batteries. Do not dispose of batteries in a fire. They may burn or

explode.

• If the liquid from the batteries gets onto your skin or clothes, wash it well with clean water. Do not

use the remote if the batteries have leaked. The chemicals in batteries could cause burns or other

health hazards.

• If you eat the liquid from the batteries, brush your teeth and see doctor. Do not use the remote if

the batteries have leaked. The chemicals in batteries could cause burns or other health hazards.

!

5

ENGLISH

6

TABLE OF CONTENTS

ENGLISH

TABLE OF CONTENTS

2 TIPS FOR SAVING EN-

ERGY

3 IMPORTANT SAFETY IN-

STRUCTIONS

7 BEFORE USE

7 Preparing for operation

7 Usage

7 Cleaning and maintenance

7 Service

8 PRODUCT INTRODUC-

TION

8 Name and function of parts

8 What to do before operation

9 Operation Indication Lamps

10 Wireless Remote Controller

12 OPERATING INSTRUC-

TION

12 How to insert the Batteries

12 Wireless Remote Controller Mainte-

nance

13 INSTALLATION IN-

STRUCTIONS

13 Installer Setting -How to enter installer

setting mode

14 Installer Setting - Installer Setting

Code Table

15 Installer Setting - Setting Address of

Central Control

15 Installer Setting - Checking Address of

Central Control

16 OWNER'S INSTRUC-

TION

16 Cooling Mode - Standard Operation

16 Cooling Mode - Power Cooling

17 Heating Mode

18 Auto Changeover Mode

18 Auto Changeover Mode - Setting the

Mode Change Temperature

19 Auto Operation Mode

20 Dehumidiﬁcation Mode

21 Fan Mode

22 Temperature Setting/Room Tempera-

ture checking

23 Airﬂow Setting

23 Celsius/Fahrenheit Switching

24 Timer

25 MAINTENANCE AND

SERVICE

25 Indoor Unit

26 Operation Tips!

26 When the air conditioner is not

going....

27 Troubleshooting Tips! Save time and

money!

27 Call the service immediately in the fol-

lowing situations

BEFORE USE

7

ENGLISH

Preparing for operation

• Contact an installation specialist for installation.

• Use a dedicated circuit.

Usage

• Being exposed to direct airflow for an extended period of time could be hazardous to your

health. Do not expose occupants, pets, or plants to direct airflow for extended periods of time.

• Due to the possibility of oxygen deficiency, ventilate the room when used together with stoves

or other heating devices.

• Do not use this air conditioner for non-specified special purposes (e.g. preserving precision de-

vices, food, pets, plants, and art objects). Such usage could damage the items.

Cleaning and maintenance

• Do not touch the metal parts of the unit when removing the filter. Injuries can occur when han-

dling sharp metal edges.

• Do not use water to clean inside the air conditioner. Exposure to water can destroy the insula-

tion, leading to possible electric shock.

• When cleaning the unit, first make sure that the power and breaker are turned off. The fan ro-

tates at a very high speed during operation. There is a possibility of injury if the unit’s power is

accidentally triggered on while cleaning inner parts of the unit.

Service

For repair and maintenance, contact your authorized service dealer.

BEFORE USE

8

PRODUCT INTRODUCTION

ENGLISH

Name and function of parts

1 Indoor unit

2 Outdoor unit

3 Remote controller

4 Inlet air

5 Discharge air

6 Refrigerant piping, connection electric wire

7 Drain pipe

8 Ground wire

Wire to ground outdoor unit to prevent

electrical shocks.

What to do before operation

If your installation has a customized control

system, ask your LG dealer for the operation

that corresponds to your system.

A Pair system or simultaneous operation

system

B Multi system

1 Unit with remote controller

2 Unit without remote controller

(when used as simultaneous operation)

PRODUCT INTRODUCTION

1

3

4

6

5

4

7

2

8

A

B

1 1

12

PRODUCT INTRODUCTION

9

ENGLISH

Operation Indication Lamps

On/Off

: Lights up during the system operation.

Filter Sign

: Lights up after 2400 hours from the time of first operating unit.

Timer

: Lights up during Timer operation.

Defrost Mode

: Lights up during Defrost Mode or Hot Start operation.

(Heat pump type)

Forced operation

: To operate the unit when the remote control can't be used for

any reason.

10

PRODUCT INTRODUCTION

ENGLISH

1 PLASMA Button (OPTIONAL)

Used to start or stop the plasma-purifica-

tion function.

2 JET COOL Button

Speed cooling operates super high fan

speed.

3 OPERATION MODE SELECTION Button

Used to select the operation mode.

4 FUNCTION SETTING Button

Used to set or clear Auto Clean, Smart

Clean, Electric heater or Individual vane

angle control

5 LCD LUMINOSITY Button (OPTIONAL)

Used to adjust LCD luminosity

6 SMART CLEAN Button (OPTIONAL)

Used to start or stop Smart Clean.

7 CLEAR ALL Button

Used to clear all timer.

8 ROOM TEMPERATURE SETTING Button

Used to select the room temperature.

9 ON/OFF Button

Used to turn on/off the unit.

10 INDOOR FAN SPEED SELECTION Button

Used to select fan speed in four steps

low, medium, high and chaos.

11 UP/DOWN AIRFLOW Button

Used to stop or start louver movement

and set the desired up/down airflow di-

rection.

12 LEFT/RIGHT AIRFLOW Button (OP-

TIONAL)

Used to set the desired left/right(horizon-

tal) airflow direction.

13 TIMER AND TIME SETTING Button

Used to set the time of starting or stop-

ping and sleeping operation.

14 ROOM TEMPERATURE CHECKING But-

ton

Used to check the room temperature.

15 °C/°F SWITCH Button

Used to switch temperature reading from

Celsius to Fahrenheit.

16 RESET Button

Used to reset the remote controller.

1

8

9

10

11

12

13

14

15

16

2

3

4

5

6

7

Cooling Mode

Auto Mode or Auto Changeover

Dehumidiﬁcation mode

Heating Mode

Fan Mode

• Cooling Model( ), Heat Pump Model( )

Operation Mode

Wireless Remote Controller

This air-conditioner is equipped with wireless remote controller basically. But if you want to be

available with wired remote controller, you pay for it.

PRODUCT INTRODUCTION

11

ENGLISH

NOTE

!

•

The wireless remote controller do not

operate the swirl mode.(4Way Type)

•

For more details refer to the Wireless

Remote Control Accessory manual.

•

The actual product can be different

from above contents depending upon

model type.

CAUTION

of handling the Remote Controller

• Aim at the signal receiver on the wired

remote controller so as to operate.

• The remote control signal can be re-

ceived at a distance of up to about 7m.

• Be sure that there are no obstructions be-

tween the remote controller and the sig-

nal receptor.

• Do not drop or throw the remote con-

troller.

• Do not place the remote controller in a lo-

cation exposed to direct sunlight, or near

the heating unit, or any other heat

source.

• Block a strong light over the signal recep-

tor with a curtain or etc. so as to prevent

the abnormal operation. (ex:electronic

quick start, ELBA, inverter type fluores-

cent lamp)

!

12

ENGLISH

How to insert the Batteries

Remove the battery cover by pulling it accord-

ing to the arrow direction.

Insert new batteries making sure that the (+)

and (-) of battery are installed correctly.

Reattach the cover by sliding it back into posi-

tion.

Wireless Remote Controller

Maintenance

Choose a suitable place where its safe & easy

to reach.

Fix the holder to wall etc with the supplied

screws firmly.

Slide the remote controller inside the holder.

OPERATING INSTRUCTION

NOTE

!

• Always use/replace both batteries of

same type.

• If the system is not to be used for a

long time, remove the batteries to save

their working life.

• If the display screen of remote con-

troller starts, fading replace both of the

batteries.

NOTE

!

• Remote controller should never be ex-

posed to direct sunlight.

• Signal transmitter & receiver should al-

ways be clean for proper communica-

tion. Use a soft cloth to clean them.

• In case some other appliances also get

operated with remote control, change

their position or consult your service-

man.

OPERATING INSTRUCTION

13

ENGLISH

1 With the FAN SPEED button pressed,

press the RESET button.

2 By using the TEMPERATURE SETTING

button, set function code and setting

value. (Please refer the Installer Setting

Code Table.)

3 Press the ON/OFF button toward the in-

door unit 1 time.

4 Reset the remote controller to use the

general operation mode.

CAUTION

Installer setting mode is to set the detail function of the remote controller.

If the installer setting mode is not set correctly, it can cause problems to the product, user

injury or property damage. This must be set by an certificated installer, and any installation

or change that is carried out by a non-certificated person should be responsible for the re-

sults. In this case, free service cannot be provided.

!

R

Refer to the Installer Setting Code Table

on the next page.

INSTALLATION INSTRUCTIONS

Installer Setting -How to enter installer setting mode

INSTALLATION INSTRUCTIONS

14

INSTALLATION INSTRUCTIONS

ENGLISH

Mode Override

This Function is only for Non-Auto Changeover H/P model.

Ceiling Height Selection

Our products provide variety of air volumes and capacities according to the selection of ceil-

ing heights.

Cooling/Heating performance is enhanced with relation to ceiling height.

- The highest/cooling heating performance and efficiency are provide at super high.

(Some noise may be generated according to the level height setting.)

Group Control

This function is only for group control. Please don’t set this function in case of non-group

control.

After setting Group Control of the product, turn off the power then turn it back on after 1

minute.

Auxiliary heater

This function is only applied to models with Auxiliary Heater function being activated.

Installer Setting - Installer Setting Code Table

Installer Setting Code Table

No. Function Function Code Setting Value Remote Controller LCD

0 Mode Override

0

0 : Set to Master

1 : Set to Slave

1

Ceiling Height

Selection

1

1 : Standard

2 : Low

3 : High

4 : Super High

2

Group Control

2

0 : Set to Master

1 : Set to Slave

2 : Check Master/Slave

Auxiliary heater

2

3 : Set to Auxiliary heater

4 : Cancel Auxiliary heater

5 :

Check Auxiliary heater Installation

INSTALLATION INSTRUCTIONS

15

ENGLISH

Installer Setting - Setting Address of Central Control

Installer Setting - Checking Address of Central Control

1 With the PLASMA button pressed, press the RESET button.

2 Press the ON/OFF button toward the indoor unit 1 time, and the indoor unit will display the

set address in the display window.

• The address display time and method can differ by the indoor unit type.

3 Reset the remote controller to use the general operation mode.

1 With the MODE button pressed, press the

RESET button.

2 By using the temperature setting button,

set the indoor unit address.

• Setting range : 00 ~ FF

3 After setting the address, press the

ON/OFF button toward the indoor unit 1

time.

4 The indoor unit will display the set address

to complete the address setting.

• The address display time and method

can differ by the indoor uint type.

5 Reset the remote controller to use the

general operation mode.

16

OWNER'S INSTRUCTION

ENGLISH

Cooling Mode

- Standard Operation

1 Press the ON/OFF button.

The unit will respond with beep sound.

2 Press MODE button to select Cooling

Mode.

3 Set the desired temperature by pressing

TEMP button.

Press ROOM TEMPERATURE CHECKING

button to check the room temperature.

When setting the desired temperature is

higher than room temperature, cooling

wind isn’t blow out.

• Setting Temp. Range :

18~30°C(64~86°F)

Cooling Mode - Power Cooling

1 Press the ON/OFF button.

The unit will respond with beep sound.

2 Press MODE button to select Cooling

Mode.

3 Press the JET COOL button. The unit will

operate in super high fan speed in cooling

mode.

• Wall mounted models operate power

cooling mode for 30 minutes.

4 To cancel the Power cooling Mode press

the Jet Cool button or the fan button or the

room temperature setting button again and

the unit will operate in high fan speed in

cooling mode.

OWNER'S INSTRUCTION

17

ENGLISH

Heating Mode

This Function is only for Heat Pump model.

1 Press the ON/OFF button.

The unit will respond with beep sound.

2 Press MODE button to select Heating

Mode.

3 Set the desired temperature by pressing

TEMP button.

Press ROOM TEMPERATURE CHECKING

button to check the room temperature.

When setting the desired temperature is

lower than room temperature, heating

wind isn’t blow out.

• Setting Temp. Range in Heating Mode :

16~30°C (60°F~86°F)

4 Set the fan speed again. You can select

the fan speed in four steps – low, medium,

high, or chaos. Each time the button is

pressed, the fan speed mode is shifted.

18

OWNER'S INSTRUCTION

ENGLISH

Auto Changeover Mode - Setting the Mode Change Temperature

This Function is to set the operating mode of the Auto Changeover Mode.

1 In Auto Changeover Mode, Press the ROOM TEMPERATURE CHECKING button for 3 sec-

onds. The mode change temperature set before will be displayed.

2 Press the TEMPERATURE SETTING button to set desired Mode Change Temperature.

(Default value is 2°C(4°F).)

The Mode Change Temperature is the difference of temperature when from cooling mode to

heating mode or from heating mode to cooling mode.

Ex) When setting temperature is 25°C(76°F) and room temperature is 20°C(68°F), then oper-

ating mode is heating. If you set the mode change temperature to 2°C(4°F), when the

room temperature up to 27°C(25°C + 2°C)(80°F(76°F + 4°F)), the unit start cooling opera-

tion.

Auto Changeover Mode

This Function is only available on some products.

1 Press the ON/OFF button. The unit will re-

spond with beep sound.

2 Press MODE button to select Auto

Changeover Mode.

3 Set the desired room temperature.

• Setting Temp. Range in Auto Changeover

Mode : 18~30°C (64~86°F)

4 You can select the fan speed in four

steps – low, medium, high and chaos.

Each time the button is pressed, the fan

speed mode is shifted.

D

During Auto changeover Mode

• The air conditioner changes the opera-

tion mode automatically to keep indoor

temperature. When room temperature

vary over ±2°C(4°F) with respect to set-

ting temperature, air conditioner keeps

the room temperature within ±2°C(4°F)

with respect to setting temperature by

auto changeover mode

OWNER'S INSTRUCTION

19

ENGLISH

Auto Operation Mode

1 Press the ON/OFF button.

The unit will respond with beep sound.

2 Press MODE button to select Auto Opera-

tion Mode.

3 Set the desired temperature.

The temperature and fan speed are auto-

matically set by the electronic controls

based on the actual room temperature.

If you feel hot or cold, press TEMPERA-

TURE SETTING buttons for more cooling

or heating effect.

You cannot switch the indoor fan speed. It

has already been set by the Auto Opera-

tion Mode rule.

You can set desired temperature and indoor

fan speed.

Setting Temp. Range : 18~30°C(64~86°F)

Code Feel

2 Cold

1 Slightly cool

0 Neutral

-1 Slightly warm

-2 Warm

❈ Please select the code

depend on your feeling.

During Auto Operation Mode

• If the system is not operating as de-

sired, manually switch to another

mode. The system will not automati-

cally switch from the cooling mode to

the heating mode, or from heating to

cooling, then you must set the mode

and the desired temperature again.

20

OWNER'S INSTRUCTION

ENGLISH

Dehumidiﬁcation Mode

1 Press the ON/OFF button.

The unit will respond with beep sound.

2 Press MODE button to select Dehumidifi-

cation Mode.

3 Set the fan speed. You can select the fan

speed in four steps - low, medium, high, or

chaos. Each time the button is pressed,

the fan speed mode is shifted.

During Dehumidification Mode

• If you select the dehumidification mode

on the operation selection button, the

indoor unit starts to run the dehumidifi-

cation function, automatically setting

the room temp. and air volume to the

best condition for dehumidification

based on the sensed room temp.

In this case, the setting temp. is not

displayed in the Remote Controller and

you are not able to control the room

temp. either.

• During the healthy dehumidification

function, the air volume is automatically

set according to the algorithm respond-

ing to the current room temp. and

makes the room condition healthy and

comfortable even in the high humidity

season.

Page is loading ...

LG UV12H.NJ1 User manual

Other documents