Tripp Lite B119-302-R User manual

Owner’s Manual

WARRANTY

REGISTRATION

Register online today for

a chance to win a FREE Tripp Lite

product! www.tripplite.com/warranty

2 x 1 HDMI Switch

(V 1.3)

Model: B119-302-R

Tripp Lite World Headquarters

1111 W. 35th Street, Chicago, , IL 60609 USA

Customer Support: +1.773.869.1234

www.tripplite.com

Follow these instructions and operating procedures to ensure correct performance and to prevent damage to this unit or to its con-

Package Contents 2

Overview and Product Features 2

Safety 2

Installation and Operation 2

Extended Applications 3

Troubleshooting 3

Warranty & Warranty Registration 4

Español 5

Français 9

Safety

Use of this equipment in life support applications where failure of this equipment can

reasonably be expected to cause the failure of the life support equipment or to signiﬁcantly

affect its safety or effectiveness is not recommended. Do not use this equipment in the presence

of a ﬂammable anesthetic mixture with air, oxygen or nitrous oxide.

Installation and Operation

1. Connecting the HDMI Sources

Connect each HDMI Source to an Input Port on the

B119-302-R Switch using Tripp Lite P568-Series

HDMI cables (Not included).

NOTE: To ensure maximum functionality, the distance

between the HDMI Source and the

B119-302-R Switch should not exceed 16 ft (5 m).

2. Connecting the HDMI Display

Using the included 6 ft. HDMI cable, connect the

B119-302-R Switch Output Port to the HDMI

Display.

NOTE: To ensure maximum functionality, the distance

between the source and the B119-302-R Switch should not

exceed 16 ft (5 m).

3. Connecting the AC Adapter

Connect the included AC Adapter to the B119-302-R

Switch’s DC Jack and then plug it into a power

source. (For protection against damaging surges

and spikes, it is recommended that you plug the AC

Adapter into a Tripp Lite Surge Suppressor).

4. Selecting an HDMI Source

To toggle between sources connected to the

B119-302-R Switch, press the Switch Button on the

side of the unit.

2

Overview and Product Features

The B119-302-R 2 x 1 HDMI Switch enables you to select one of two HDMI sources to be

displayed on a single HDMI monitor. Key product features are:

• HDMI Version 1.3

• Signal rates up to 10.2 Gbps

• Supports up to 1080p (1920 x 1080) resolution

Package Contents

• B119-302-R 2 x 1 HDMI Switch (V 1.3) • 6 ft. HDMI Cable

• AC Adapter (100-240V), 5V 2.6A Output • Owner’s Manual

OUTPUT

DC 5V

SWITCH

INPUT-1

INPUT-2

1

HDMI Output Port

2

Switch Button (Allows you to choose

between 2 HDMI sources)

3

DC Jack (DC 5V, 2.6A power input)

4

HDMI Input-1 Port

5

HDMI Input-1 Port Indicator (The LED

lights when the input is chosen)

6

HDMI Input-2 Port Indicator (The LED

lights when the input is chosen)

7

HDMI Input-2 Port

1

2

4 5 6 7

3

Extended Applications

You can increase the distance from the HDMI Source to the Display beyond the maximum limit

by using a Tripp Lite HDMI Extender (Model: B122-000). Simply insert the B122-000 HDMI

Extender between the B119-302-R Switch and the Display, and connect using Tripp Lite P568-

Series HDMI cables. (For more information, see the B122-000 HDMI Extender Owner’s Manual)

The diagram below shows the preferred set-up for an extended application:

Troubleshooting

If you experience problems with the Audio/Video display from the B119-302-R Switch, try the

following steps:

• Make sure you have not exceeded the maximum cable lengths (shown in these instructions). If

you’ve exceeded these lengths, use shorter cabling.

• Connect an HDMI cable directly between the source(s) and the display to verify the cable is

operating. Repeat to test all cables.

If the source(s) and the display do not work properly:

• Try using a cable that you know to be operational. If this still does not work, then the problem

lies with either the source(s) or the display.

If the source(s) and the display are operating properly:

• Test each of the ports on the B119-302-R Switch individually, using the source(s), display and

cables that you have just tested and found to work properly. Connect a functioning HDMI cable

between the B119-302-R Output Port and a functioning Display. Connect a functioning source

and Input Port-1 of the B119-302-R Switch using a functioning HDMI cable. Repeat this step for

Input Port-2 of the B119-302-R Switch. If both ports work correctly, the B119-302-R Switch is

functioning properly. If one or both ports are not working (or if none of these steps have resolved

the problems), contact Tripp Lite Technical Support at +1.773.869.1234.

3

P568-016

B119-302-R Switch

Any Tripp Lite

P568 Series Cable

up to 100 ft.

B122-000

HDMI Extender

P568-016

Display

Tripp Lite World Headquarters

1111 W. 35th Street, Chicago, , IL 60609 USA

Customer Support: +1.773.869.1234

www.tripplite.com

4

Warranty & Warranty Registration

1-Year Limited Warranty

TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of one

(1) year from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited to repairing

or replacing (at its sole option) any such defective products. To obtain service under this warranty, you

must obtain a Returned Material Authorization (RMA) number from TRIPP LITE or an authorized

TRIPP LITE service center. Products must be returned to TRIPP LITE or an authorized TRIPP LITE service

center with transportation charges prepaid and must be accompanied by a brief description of the problem

encountered and proof of date and place of purchase. This warranty does not apply to equipment, which

has been damaged by accident, negligence or misapplication or has been altered or modiﬁed in any way.

EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED,

INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s)

or exclusion(s)may not apply to the purchaser.

EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT,

SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS

PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specically, TRIPP LITE is not

liable for any costs, such as lost proﬁts or revenue, loss of equipment, loss of use of equipment, loss of software, loss

of data, costs of substitutes, claims by third parties, or otherwise.

WARRANTY REGISTRATION

Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You’ll be

automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union)

Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations, when

customers buy new electrical and electronic equipment from Tripp Lite they are entitled to:

Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on the country)•

Send the new equipment back for recycling when this ultimately becomes waste•

Tripp Lite follows a policy of continuous improvement. Product speciﬁcations are subject to change without notice.

Made in China.

Page is loading ...

Tripp Lite B119-302-R User manual

Tripp Lite B119-302-R User manual

in other languages

Related papers

Other documents