5
•
Keep the packaging (lm, foam plastic and other)
out of reach of children as they may choke on them.
•
Any modications or adjustments to the product are
not allowed. All the repair works should be carried
out by an authorized service centre. Failure to do so
may result in device and property damage or injury.
CAUTION! Do not use the appliance in case of
any malfunctions.
Technical Specications
Model.................................................RS-707-E
Powered by .................................1 × CR2032
Rated power .......................................3 V
Weight range ...................................5-150 kg
Graduation ..............................................100 g
Number of weight sensors ......................... 4
Platform material ...............tempered glass
Display.........................................................LCD
Auto On feature ..........................................yes
Auto Off feature .........................................yes
Low battery indication ..............................yes
Overload indication ...................................yes
Dimensions ........................30 × 30 × 1.6 cm
Package Includes
Scale ........................................................... 1 pc.
Battery CR2032 .......................................1 pc.
User manual ............................................. 1 pc.
Service booklet ........................................ 1 pc.
The manufacturer reserves the right to make any modications to design, packaging,
or technical specications of the product without prior notice.
Scale Parts
A1
1. Platform
2. LCD display
3. Bottom panel
4. UNIT button is used to make a selection of the measurement units
5. Battery compartment
6. Weight reading
7. Measurement units
I . PRIOR TO THE FIRST USE
Carefully remove the unit and its accessories from the packaging. Dispose all packaging
materials.
Keep all warning labels, including the serial number identication label located on the
housing. The absence of the serial number will deprive you of your warranty benets!
After transportation or storage at low temperatures allow the appliance to stay at room
temperature for at least 2 hours before using.
Before the use ensure that the battery is installed correctly with regard to polarity. Close
the battery compartment cap.
Note! Batteries, included in set, are intended only for checking the appliance operational
capability. For extended operation of the appliance it is recommended to purchase a new set.
Installing the battery ensure that your hands and the unit are dry.
II . OPERATING
1.
Select the desired unit of the measurement. The default measurement for the
scale is kilograms (the “kg” indicator on display). Press the “UNIT” button on the
bottom panel of the scale to change the measuring unit to stones (the “st:lb” in-
dicator) or pounds (the“lb” indicator). The selected measuring unit will be saved.
2.
Place the scale on a at, stable, and horizontal surface. Uneven surfaces may cause
inaccurate readings. The scale is equipped with an Auto On feature. Carefully step
onto the weighing platform with both feet to turn the scale on. Place your feet in
the centre of the platform. Stand straight and still. Your body weight should be
evenly distributed between the feet.
Always ensure that the surface of the scale and your feet (soles of your shoes) are
completely dry before the use to prevent slipping or injury.
The unit displays “ERR” message to indicate an overload (over 150 kg) and “Lо” message
to indicate that the battery needs to be replaced.
3. Three seconds later the digits on the display will ash 3 times and the scale will
show the accurate weight reading.
4. Step off the scale. The unit will automatically turn off in 10-15 seconds.