TECHNICAL SPECIFICATIONS
Speaker .......................... 8.6 mm Dynamic
Sensitivity ................... 95 dB SPL @ 1 kHz
Impedance ...................... 16 Ohm @ 1 kHz
Frequency ............................20Hz - 20kHz
Housing .................................... Aluminum
Cord length ........................... 730/320 mm
Cord diameter ......................... 2.0/1.5 mm
Sleeves ........................................ Silicone
Y-Split......Thermoplastic Elastomers - TPE
Cords ........................Kevlar, Copper, TPE
Cord holders ...................................... TPE
Strain Reliefs ..................................... TPE
SOUND CHARACTERISTICS
The dynamic speaker is designed for
everyday listening. The earphones deliver
a warm and rich sound throughout the
entire sonic spectrum, backed by
heavy bass.
MATERIALS & DESIGN
Every part, from the aluminum housing
and noise isolating silicone sleeves to
the Kevlar reinforced cables, have been
carefully designed to offer the best
possible experience.
GENERAL INTRODUCTION - 3