English
11
fl at panel solutions
LCD TV Wall Mount
Installation Manual
MAF15BKR
Fits TVs 15”- 32”
Maximum Load
Capacity – 55 lb (25 kg)
Thank you for choosing the RCA MAF15BKR Universal Flat
Panel TV Wall Mount. This mount can be used for all major
brands of 15" - 32" fl at panel TVs, 55 lbs (25 kg) or under.
Before attempting to mount your television set, please
remove all parts from this package and read the installation
instructions carefully.
WARNING: Use of this mount with a TV weighing over
55 lbs. or with a screen larger than 32" could cause
the mount to fail causing property damage and/or
personal injury.
1. Read these instructions carefully before you
begin. If you are unsure of any part of the
process, contact a professional contractor or
installer for assistance. Improper installation can
result in injury or damage.
2. The wall or mounting surface must be capable
of supporting the combined weight of the mount
and the display; if not, the structure must be
reinforced.
3. Safety gear and proper tools must be used.
Failure to do so can result in injury and/or
damage. A minimum of two people are required
for installation. Do not attempt to install this
mount alone under any circumstances.
4. Follow all instructions and recommendations
regarding adequate ventilation and suitable
locations for mounting your display. Consult the
owner‘s manual for your particular display for
more information.
5. For drywall installation, it is essential for
the wall mount plate to be attached to wall
studs. (Use a stud fi nder.)
6. Use the included hardware for mounting
purposes. This hardware has been provided to
ensure a safe and secure mount.
7. Hire a licensed electrician to relocate an
electrical outlet, if needed.
8. Be sure to purchase wires long enough
to connect the TV to the audio and video
components in your installation.
Keep your sales receipt to obtain warranty parts
and service and for proof of purchase. Attach it
here and record the model number. This number is
located on the product.
Model No. ___________________________________
Purchase Date: _______________________________
Dealer/Address/Phone ________________________
Safety precautions
Follow these precautions to ensure safe installation and mounting of your fl at panel TV.
Tools
Phillips Head Screwdriver
Ratchet or Driver with 13 mm (1/2”) Socket
Electric or Portable Drill
6 mm (1/4”) Drill Bit and Stud Finder for Drywall
Installation
10 mm (3/8”) Masonry Bit for Concrete
Installation
Package Contents
Wall Plate (x1)
Mount Arm (x2)
Safety Bar (x1)
Instruction Manual (x1)
Hardware Kit (x1)
Preparing to install
Before beginning the installation process, verify that you have all the necessary tools on hand. The
following tools are required for proper installation:
Continues on next page...
Para obtener
instrucciones en
español, consulte la
página 4.
Pour des instructions
en français, se
reporter à la page 7.
CAUTION:
This wall mount is intended for
use only with the maximum
weight of 25 kg/55 bls. Use with
heavier than the maximum weights
indicated may result in instability
causing possible injury. Follow
the installation and operation
instructions carefully.
22
Mounting the wall plate
Drywall Installation
Important! For safety reasons, this mount must be secured to a wood stud capable of supporting the
combined weight of the mount and display. Do not mount to drywall alone.
5. Place the wall plate back against the wall and
attach it using the lag bolts (A) and lag bolt
washers (B) (see Fig. 2). Do not over-tighten
these bolts and do not release the wall plate
until all bolts are in place. Ensure that the wall
plate remains level after all bolts are secured.
1. Use a high quality stud fi nder to locate a stud where
you wish to install your mount. Mark both edges of
the stud to help identify the exact center.
NOTE: You must use the center of the stud
to avoid cracking or splitting the wood during
installation.
2. Place the wall plate against the wall and level it
using the integrated bubble level.
3. While another person holds the wall plate in
position, mark two locations (top and bottom) for
securing the mount to the wall. (see Fig.1).
4. Set the wall plate aside and drill a 6 mm (1/4”)
pilot hole at each marked location.
Concrete/Brick Installation
IMPORTANT! For safety reasons, the concrete wall must be capable of supporting the combined weight
of the mount and the display. The manufacturer takes no responsibility for failure caused by walls of
insuffi cient strength.
1. Place the wall plate against the wall in
the desired location and level it using the
integrated bubble level.
2. While another person
holds the wall plate
in place, mark three
locations on the
wall for securing the
mount. Mark two
locations at the top of
the wall plate and one
location at the bottom
of the wall plate (see
Fig. 3).
3. Set the wall plate
aside and drill a 10 mm (3/8”) hole at each
marked location.
Remove any excess
dust from the holes.
4. Insert a Concrete
Anchor (C) into each
hole so that it is fl ush
with the concrete
surface (see Fig. 4). A
hammer can be used to
lightly tap the anchors
into place if necessary.
NOTE: If the concrete wall is covered by a layer
of plaster or drywall, the concrete anchor must
pass completely through the layer to rest fl ush
with the concrete surface.
Hardware Kit
(A) M8 x 63 Lag Bolt (x3)
(B) Lag Bolt Washer (x3)
(C) Concrete Anchor (x3)
(D) M4 x 12 Screw (x4)
(E) M4 x 20 Screw (x4)
(F) M6 x 12 Screw (x4)
(G) M6 x 20 Screw (x4)
(H) M6 Washer (x4)
(I) Spacer (x4)
Fig.3
Fig.1 Fig.2
Fig.4
English
33
Attaching the Arms to the TV
IMPORTANT! Use extra care during this part
of the installation. If possible, avoid placing your
display facedown as it may damage the viewing
surface.
NOTE: This mount comes with a selection
of different screw diameters and lengths to
accommodate a wide variety of display models.
Not all of the hardware in the kit will be used.
If you
cannot fi nd the appropriate screw size in the kit
provided, consult the manufacturer of your display
for more information.
1. Determine the correct length of screw to use by
examining the back of your display:
A. If the back of your display is fl at and the
mounting holes are fl ush with the surface,
you will use the shorter screws (
D or F) from
the hardware kit.
B. If the back of your display is curved, has
a protrusion, or if the mounting holes are
recessed, you will need to use the longer
screws (
E or G) and spacers (I).
2. Determine the correct diameter of screw to use
by carefully trying one of each size (M4 and M6)
from the hardware kit. Do not force any of the
screws – if you feel resistance stop immediately
and try a smaller diameter screw.
3. Attach the mount arms to the back of your
display using the screws identifi ed in Steps 1
and 2 along with the M6 washers (H) (see Fig.6).
If you are using the longer screws on a display
with a curved or recessed back, you will also
need to use the spacers (
I). You should only
use a spacer if necessary.
Make sure the screws are snug, but do not
overtighten.
For displays with curved or
recessed backs.
For displays with
Fig.6
Specifi cations
Final Installation
1. With the help of another person, carefully lift
your display and place it on the wall plate. Do
not release the display until the mount arms
have securely hooked onto the wall plate.
2. Insert the safety bar at the bottom of the mount
to prevent the display from being lifted from
the wall plate. A padlock can be inserted into
the end of the bar to help prevent theft of your
display (
see Fig.7).
IMPORTANT! The safety bar must be used
at all times to prevent the display from being
accidentally knocked from the mount.
Safety Bar
Padlock (optional,
not included)
Fig. 7
Periodically clean your mount with a dry cloth. Inspect all screws and hardware at regular intervals to
ensure that no connections have become loose over time. Re-tighten as necessary.
Display Size: 15” to 32”
Maximum Load: 25 kg (55 lbs)
Universal VESA Mounting Pattern: 230 mm x 250 mm (9” x 9.8“) max
Profi le: 2.2 cm (0.9”)
5. Place the wall plate back against the wall and attach it using the
lag bolts (A) and lag bolt washers (B) provided (see Fig. 5). Do not
over-tighten these bolts and do not release the wall plate until all
bolts are in place. Ensure that the wall plate remains level after all
bolts are secured.
Fig.5
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
1010
Limited Lifetime Warranty
Audiovox Accessories Corporation (the “Company”) warrants to you the original retail purchaser of this
product that should it, under normal use and conditions, be proven defective in material or workmanship
during its lifetime while you own it, such defect(s) will be repaired or replaced (at the Company’s option)
without charge for parts and repair labor. To obtain repair or replacement within the terms of this Warranty,
the product is to be delivered with proof of warranty coverage (e.g. dated bill of sale), specifi cation of
defect(s), transportation prepaid, to the Company at the address shown below. Do not return this product to
the Retailer.
This Warranty does not cover product purchased, serviced or used outside the United States or Canada. This
Warranty is not transferable and does not extend to costs incurred for installation, removal or reinstallation
of the product. This Warranty does not apply if in the Company’s opinion, the product has been damaged
through alteration, improper installation, mishandling, misuse, neglect, or accident. THE EXTENT OF THE
COMPANY’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT
PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE PURCHASE
PRICE PAID BY PURCHASER FOR THE PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES,
INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE SHALL BE LIMITED TO DURATION OF THIS WARRANTY. IN NO CASE SHALL THE
COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES WHATSOEVER. No
person or representative is authorized to assume for the Company any liability other than expressed herein
in connection with the sale of this product.
Some states/provinces do not allow limitations on how long an implied warranty lasts or the exclusion or
limitation of incidental or consequential damage so the above limitations or exclusions may not apply to
you. This Warranty gives you specifi c legal rights and you may also have other rights which vary from state/
province to state/province.
U.S.A.: Audiovox Return Center, 150 Marcus Blvd., Hauppauge, New York 11788
CANADA: Audiovox Return Center, c/o Genco, 6685 Kennedy Road, Unit 3, Door 16, Mississauga, Ontario
L5T 3A5
Garantie à vie limitée
Audiovox Accessories Corporation (l’« Entreprise ») vous garantit en tant qu’acheteur de détail d’origine du
présent produit que, s’il présente des défauts de matière ou de fabrication dans des conditions d’utilisation
normales pendant sa durée de vie alors que vous en êtes propriétaire, ce/ces défaut(s) feront l’objet d’une
réparation ou d’un remplacement (à la discrétion de l’Entreprise) sans frais pour les pièces et pour les heures
de main-d’œuvre. Pour obtenir une réparation ou un remplacement en vertu des termes de la présente
garantie, le produit doit être livré à l’Entreprise avec preuve de couverture de garantie (c’est-à-dire une
preuve d’achat datée), une description du ou des défauts, et les frais de transport payés d’avance, à l’adresse
indiquée ci-dessous. Ne pas retourner ce produit chez le détaillant.
La présente garantie ne couvre pas de produit acheté, réparé ou utilisé à l’extérieur des États-Unis ou
du Canada. La présente garantie ne peut pas être transférée et ne couvre pas les frais encourus pour
l’installation, l’enlèvement ou la réinstallation du produit. La présente garantie ne s’applique pas si, selon
l’avis de l’Entreprise, le produit a été endommagé suite à une modifi cation, une installation incorrecte,
une manipulation incorrecte, une mauvaise utilisation, une négligence ou un accident. L’ÉTENDUE DE
LA RESPONSABILITÉ DE L’ENTREPRISE EN VERTU DE LA PRÉSENTE GARANTIE EST LIMITÉE
À LA RÉPARATION OU AU REMPLACEMENT INDIQUÉS CI-DESSUS ET, EN AUCUN CAS, LA
RESPONSABILITÉ DE L’ENTREPRISE NE PEUT DÉPASSER LE PRIX D’ACHAT PAYÉ PAR L’ACHETEUR
POUR LE PRODUIT.
Cette garantie remplace toute autre garantie ou responsabilité expresse. TOUTE GARANTIE IMPLICITE,
INCLUANT TOUTE GARANTIE IMPLICITE DE QUALITÉ MARCHANDE OU D’ADAPTATION À UN
USAGE PARTICULIER EST LIMITÉE À LA DURÉE DE LA PRÉSENTE GARANTIE. EN AUCUN CAS
L’ENTREPRISE NE PEUT ÊTRE RESPONSABLE POUR UN QUELCONQUE DOMMAGE CONSÉCUTIF
OU INDIRECT. Aucune personne ou aucun représentant n’est autorisé à assumer pour l’entreprise une
quelconque responsabilité autre que celle exprimée dans les présentes en relation avec la vente de ce produit.
Certaines juridictions n’autorisent pas de limites quant à la durée d’une garantie implicite ou quant à
l’exclusion ou la limitation de dommages indirects ou consécutifs; les limitations et exclusions indiquées
dans les présentes pourraient donc ne pas s’appliquer à votre cas. Cette garantie vous donne des droits légaux
spécifi ques et vous pourriez également jouir d’autres droits qui varient d’une juridiction à l’autre.
É-U : Audiovox Return Center, 150 Marcus Blvd., Hauppauge, New York 11788
CANADA : Audiovox Return Center, c/o Genco, 6685 Kennedy Road, Unit 3, Door 16, Mississauga, Ontario
L5T 3A5
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
- français: RCA MAF15BKR Manuel utilisateur
- español: RCA MAF15BKR Manual de usuario
Related papers
Other documents
-
Audiovox HP5041 User manual
-
DYNAVISTA Adjustable Tilt Swivel TV Wall Mount Bracket Fits up to 24 Inch LCD LED TV Flat Screen Monitors Low-Profile Rotating Tilting TV Mount Compatible User manual
-
Lindy 40877 User manual
-
OSD Audio FM-644 Owner's manual
-
Strong SM-TILT-S Owner's manual
-
-
Ematic EMW5001 Installation guide
-
-
HDX SL-WSUS-110B User guide
-
Peerless SUF661 Installation guide
