Hisense RD-42WR4SLA/CLA1 User manual

  • Hello! I am an AI chatbot trained to assist you with the Hisense RD-42WR4SLA/CLA1 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
RD-42WR4SLA/CLA1
RD-42WR4SLA/CPA1
RD-42WR4SLA/CSA1
Do not store explosive substances such as
aerosol cans with a flammable propellant in
this appliance.
This appliance is intended to be used in
household and similar applications such as
-staff kitchen areas in shops, offices and
other working environments;
-farm houses and by clients in hotels,
motels and other residential type
environments;
-bed and breakfast type environments;
-catering and similar non-retail applications
Keep burning candles,lamps and other
items with naked flames away from the
appliance so that do not set the appliance
on fire.
15
Description of the appliance
View of the appliance
Control panel
Temperature regulator in refrigerator
chamber
Note:
Due to unceasing modification of our products your refrigerator may be slightly different
from this Instruction Manual, but its functions and using methods remain the same.
1.Wind cover
2.Ice tray( )
3.Freezer shelf
4.Freezer temprature regulator
5.Controller
6.Referigerator shelf
7.Door light switch
8.Adjust knob
9.Lamp cover
10. Refrigerator shelf
11. Side plate
12. Crisper cover
13. Crisper
14. Adjustable feet
15. Door shelf
16. Adjustable feet
optional
1
4
6
9
11
2
5
7
12
14
3
8
10
13
15
16
Insufficient refrigeration in chamber.
Set the temperature controller at by
"Colder".
Using the refrigerator in normal condition.
Set the temperature controller knob
vertically or vertical position by "Cold".
You can choose the position according to
different ambient temperature in different
seasons.
vertically or vertical position by "Colder".
Less fresh food in chamber.
Set the temperature controller knob by Cold".
Notice:Do not place the food on the air
outlet, and leave enough space for airflow.
"
In spring and autumn: set the temperature
controller knob vertically.
In winter: set the temperature controller knob
Refrigerator Temperature Control
ventilation, follow the instructions relevant
to the installation.
Wherever possible, the back of the
product should be against a wall to avoid
touching or catching warm parts
(compressor, condenser) and to prevent
the risk of fire; follow the instructions
relevant to installation.
The appliance must not be located close
to radiators or
Make sure that the main plug is accessible
after installation of the appliance.
cooking appliances.
Any electrical work required to do the
servicing of the appliance should be
carried out by a qualified electrician or
person.
This product must be serviced by an
authorized service center, and only
genuine spare parts must be used.
authorized
Service
2) If the appliance contains a freezer compartment.
1) If the appliance is Frost Free.
Reverse the door
The side in which the door opens can be
changed from the right side (as supplied) to
the left side, if the installation site
Tools you will need:
1. 8mm socket driver
2. Cross-shaped screwdriver
allows for it.
3. Putty knife or thin-blade screwdriver
1.
the top hinge bracket byunscrewing the
three retaining nuts. Lift the upper door and
place it on a padded surface to prevent it
scratched.
Remove the top hinge cover and remove
2. Remove the two flange screw,then remove
the middle hinge that hold the lower door in
place.
3. Remove the hinge hole cover from the
right holes as illustrated and transfer them to
the uncover hole at the left side.
4. Remove both adjustable feet and remove
the bottom hinge bracket by unscrewing the
bolts.
5. Replace both adjustable feet.Transfer the
lower door to the property position. Secure
the door's level, make the bottom hinge pin
into the lower hole of the door, then tight the
bolts.
6. Make the middle hinge reverse the
direction 180 degree, then transfer it to the
left property position. Make the middle hinge
pin in the upper hole of the lower door, then
tight the bolts. Transfer the upper door to the
property position. Secure the door's level;
Make the middle hinge pin into the lower
hole of the upper door.
21
Cold
Cold
Colder
Colder
Cold
Cold
Colder
Colder
Colder
Cold
Cold
Cold
Colder
Colder
/