GOCLEVER NEO CLEANER Quick start guide

QUICK START GUIDE

NEO

CLEANER

MODEL NO: HROBVAC

Page is loading ...

ABOUT THE PRODUCT

The vacuum cleaner is designed to remove dust and other loose impurities, at least

4 mm long from objects and surfaces by means of sucking in air together with the

impurities. Following the instructions contained in this manual guarantees safe

installation and use of the appliance. The appliance is designed for personal use

only and may not be used for commercial purposes.

3

1 – ground sensor

2 – device charging electrode

3 – power switch

4 – direct charging socket (without using charging base)

5 – main brush

6, 9 – wheel

7 – mop

8 – ultrasonic sensor

10 – water tank

11 – atomiser

12 – cover

13 – dust bin cover

14 – screen

15 – side brush

16 – charging indicator lamp

17 – infrared emission point

18 – base charging electrode

19 – power adapter socket

PRODUCT SCHEME – FIG 1

EN

QUICK START GUIDE

1 – day of week

2 – battery level

3 – time setting, + in time setting, + in cleaning time schedule

4 – spot mode cleaning

5 – auto mode cleaning, delete time schedule

6 – return to charging base, conrm in time setting, conrm in cleaning time schedule

7 – time setting, - in time setting, - in cleaning time schedule

8 – error indicator

9 – clogged dust bin indicator

TOUCH SCREEN SCHEME – FIG 2

TECHNICAL SPECIFICATION

Water tank 400 ml

Humidier tank 150 ml

Battery 2600 mAh

Dust bin 450 ml

Adapter input: 100-240V ~, 50/60 Hz, Max. 0.45 A

Vacuum input: 14.8 V, 0.5 A, 7.4 W

4

EN

ASSEMBLING AND START

1. To charge the vacuum cleaner, you can either plug in power adaptor into direct

charging socket (Fig.1 - 4) or use a charging base. A picture below will guide you

how to install the charging base.

1 – on/o

2 – spot cleaning mode

3 – auto cleaning mode

4 – return to charging base

5 – manual positioning

6 – atomiser on

7 – atomiser o

8 – strong suction power

9 – small suction power

10 – mute

REMOTE CONTROL SCHEME – FIG 3

5

2. To assemble side brushes (Fig.1 - 15) and main brush (Fig.1 - 5), you should follow

the instructions in the picture below.

EN

3. To install the dust bin (Fig.1 - 13), you should follow the instructions on the

picture below.

4. To use mop function, put the mop (Fig.1 - 7) on the device and ll in water tank

(Fig.1 - 10).

6

EN

5. You can choose dierent cleaning modes.

If you choose a spot cleaning function,

the vacuum cleaner path will look like in

the picture below. The device will keep

away from obstacles on its way.

If you choose an auto cleaning function,

the device will learn the environment

conditions and select pattern of

cleaning most suitable for the room.

6. You should remember about maintenance of accessories, especially if you feel

the suction power of the device has decreased. You should clean HEPA lter at

least once a week and clean brushes after each use. More specics can be found in

“MAINTAINANCE AND CLEANING”.

7. To set proper time on the clock, you should use touchscreen button (Fig.2 - 3)

and choose accurate hour and day of the week in order by pressing “+” (Fig.2 - 3)

and “-“ (Fig.2 - 7) for each number and conrm each choice by pressing (Fig.2 - 6).

7

EN

8. To schedule time for planned cleanings, you should use touchscreen button

(Fig.2 - 7) and choose accurate hour and day of the week in order by pressing

“+” (Fig.2 - 3) and “-“ (Fig.2 - 7) for each number and confirm each choice by

pressing (Fig.2 - 6).

If you need to delete scheduled time, you should use touchscreen button (Fig.2 - 7),

choose the schedule you need to delete and press (Fig.2 - 5) to erase it.

MOST COMMON PROBLEMS

Robot cleaner stops

working or its speed is

decreased slightly

Check battery level,

check whether the lter and dust bin are clogged

and whether the brushes or wheels are blocked

with dust/hair/etc.,

make sure to clean the device accessories and try

again.

Remote control does not

work

Check batteries in remote control and battery level

in the robot cleaner,

wipe the infrared sensors of robot cleaner and light

sensor of remote control if they appear dirty,

keep proper distance between the robot vacuum

cleaner and remote control.

Robot cleaner does not

charge

Check if the charger/charging base is properly

connected to power supply,

if battery level is critical, it is better to charge directly

via power socket, not with charging base.

There is a noise while

cleaning

Check whether the lter and dust bin are clogged

and whether the brushes or wheels are blocked

with dust/hair/etc.,

make sure to clean the device accessories and try

again.

SAFETY PRECAUTIONS

Regularly check the power cord for damage. If the power cord is damaged,

it must be replaced by the manufacturer, an authorized service center or a

qualied individual, so as to avoid hazards or injuries.

Only use the adapter provided by the manufacturer. Using other unmatched

adapter may cause electric shock, re or product damage.

Do not touch the power cord, plug or adapter when your hands are wet.

Keep away from water, never let it soak. Do not use this product in wet or

moist environment (any environment with liquid). Never attempt to clean

wet surfaces with the vacuum cleaner.

Keep away from re and any ammable substances.

Product is intended to use in household environment, not for commercial

use.

This product should be used only indoors, do not use it outdoors.

Do not sit on top of this product or attach an object on the top of it.

Before use, remove all the damageable objects (textile, glass, lighting, etc)

and objects that could get caught in the brushes or wheels (cords, clothing,

papers, drapes, blinds, etc).

Do no place this product where it is easy for it to drop (tables, chairs, etc).

Turn o the power switch during transportation or when you don’t need to

use this product for a long time.

Before use, check whether adapter and outlet are properly connected.

Do not use this product when dust bin is full. Do not put any objects into

openings in the vacuum cleaner. Do not use the vacuum cleaner with any

opening blocked – keep openings free of dust, lint, hair and anything that

may reduce air ow.

Do not vacuum ne powders such as: our, cement, soot, plaster, toners for

printers and copiers etc.

Do not use the appliance without the dust bin and lter installed.

Do not place this product in high-temperature environment.

This device may be used by children at least 8 years old and

by physically and mentally disabled persons as well as by

persons not familiar or untrained with its operation if these

persons are supervised and instructed on safe operation.

Children must not be allowed to play with the device.

Children should not clean or maintain the device without

supervision.

If the supply cable is damaged, it must be replaced by the

manufacturer, authorized service or persons with similar

qualications to avoid danger.

8

EN

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

9

EN

MAINTAINANCE AND CLEANING

1. Only clean the device when it is not charging and it is turned off.

2. After each use, you should check the main brush and side brushes and

remove any dirt/hair/etc. that can clog them.

3. After each use, you should check if the dustbin is full and remove the dirt.

4. At least weekly you should clean HEPA lter with dry or damp soft cloth and

change the lter when it changes colour signicantly.

5. After each use of water tank and humidier, you should remove left liquid

from the tank.

6. I f the cover appears dirty or dusty, you should clean it with dry or damp soft

cloth.

7. Always make sure the wheels are not blocked with any objects.

8. Always make sure there is no dust/dirt/water on the sensors.

EXPLANATION OF SYMBOLS

DECLARATION OF CONFORMITY WITH EUROPEAN

STANDARDS

This device meets the requirements of the Electromagnetic

Compatibility Directive EMC (2014/30/EU) and Low Voltage

Directive LVD (2014/35/EU), for this reason it is marked with the

CE sign and a declaration of conformity with European standards

was made out for the device.

This symbol denotes that the device must not be disposed with

other household waste. It is forbidden by law, under pain of ne,

to throw away electrical and electronic equipment together with

other waste. It is possible to prevent various negative effects for

the natural environment and human health resultant from improper

handling of waste electronics if the product is properly disposed

of.

Page is loading ...

GOCLEVER NEO CLEANER Quick start guide

GOCLEVER NEO CLEANER Quick start guide

in other languages

Related papers

Other documents