2. Stirling
  3. 504468

Stirling 504468 User manual

  • Hello! I've reviewed the document regarding the installation of ramps using ramp stack pockets, hex bolts, and nylon insert locknuts. The document guides you through mounting, sliding, and securing the ramps. I'm ready to answer any questions you may have about the installation process or the included components.
  • What is required for installation?
    How do you mount the ramp stack pockets?
    What is the next step after mounting the ramp stack pockets?
Ramp Instructions
Step 1: Ramp stack pockets (504467), ramps (504466), and hardware are required for installation.
Step 2: Mount ramp stack pockets (504467) on the backchannel with the help of (501073) 1/4-20 X
3/4” hex bolt and (501081) 1/4-20 Nylon insert lock nut AND tighten up all 4 bolts.
Step 3: Slide ramps (504466) into ramp stack pockets (504467).
Step 4: Repeat steps 1 to 3 for another ramp.
ITEM# 1
RAMP 504466 – 2 PCS
ITEM# 2 RAMP STACK
POCKETS 504467 – 2 PCS
ITEM# 3 1/4-20 X 3/4”
HEX BOLT 501073 – 8 PCS
ITEM# 4 1/4-20 NYLON INSERT
LOCKNUT 501081– 8 PCS
STEP 2
4
3
2
1
2
STEP 3
/