Air supply
into the niche of the fireplace
Horizontally
align
Outlet
or connection point
3x2.5 cable
220V connection must be
carried out by a
qualified technician
min 1000 mm from burner to
flammable objects
(curtains or upholstered
furniture, etc.)
Screw in
handles for mounting
(unscrew after installation)
ARS
communications port
ARS 500 fuel
communication port
Cables
It is mandatory to use a separate line with a circuit breaker with a rating of at least 10A
WARNING!
- Installation of the fireplace not on a horizontal level can lead to malfunction
of the fireplace and possible fuel spillage.
- Only a qualified specialist should connect the cable to the power network.
- The fireplace mounted into in the prepared niche by holding the previously installed handles
for installation, then the handles must be removed (unscrewed) and not used during the operation
of the fireplace.
- If it is necessary to remove the fireplace from the niche, reinstall the installation handles.
There must be a fire extinguisher in the room within sight
Safe installation of the appliance
6
NEVERDARK Chalet-II
Installation instructions
Installation into the worktop
neverdark.one