2. Xiegu
  3. X6100
X6100

Xiegu X6100 Operating instructions

  • I have reviewed the provided instructions for the X6100 transceiver, focusing on its Wi-Fi and Bluetooth capabilities. This document outlines how to set up both wireless connections, including scanning, connecting, and password entry. I'm ready to help answer your questions about the device.
  • How to connect to a Wi-Fi network?
    How to turn on the Bluetooth?
    How long does it take to scan Bluetooth devices for the first time?
www.radioddity.com
Xiegu X6100 Wi-Fi & Bluetooth Function Instructions
WIFI Operation Instructions
SCAN button: Scan for nearby Wi-Fi / hotspots (Access Point)
CONNECT/DISCONNECT: Connect/disconnect the hotspot in the left list.
EDIT: Edit the element selected by the orange box on the right.
CONFIG: Move the orange box to the next.
EXIT: Exit the interface.
1. SYSTEM SETTING – WLAN – press MFK knob to enter the Wi-Fi setting interface
➟ ➟
2. Select a Wi-Fi to connect by rotating MFK – press CONFIG
➟
3. Press CONFIG to move to password – press EDIT to pop up the digital keyboard
➟
4. Enter/delete password by rotating & press MFK knob
5. Click ENTER by rotating & press MFK knob to confirm password (important)
www.radioddity.com
6. Press EDIT to exit the digital keyboard
7. Press CONNECT, please wait for about 10s
8. WiFi connected!
9. Press EXIT to exit the Wi-Fi interface
10. Wi-Fi connected confirmed!
www.radioddity.com
Bluetooth Operation Instructions
Operation Instructions
OFF/ON: Turn on/off the built-in Bluetooth function.
CONNECT/DISCONNECT: Connect/disconnect the selected Bluetooth device on the left.
EXIT: Exit the interface.
Note: When the built-in Bluetooth function is displayed as "ON", it will always scan the surrounding
Bluetooth devices.
1. SYSTEM SETTING – WLAN – press MFK knob to enter the Bluetooth setting interface
(for the first time, it should take about 1 minute to scan Bluetooth device, please be patient; will
be 5s only from second time.)
➟ ➟
2. Select a Bluetooth device by rotating MFK – press CONNECT to connect
(please make sure your Bluetooth device is on)
➟
3. Bluetooth connected!
4. Press EXIT to exit the Wi-Fi interface
/