WINGBO WBWL-S014-NW Installation guide

WBWL-S014-NW
WINGBO
Brand
WINGBO
Model
WBWL-S014-NW
Type
Installation guide

The WINGBO WBWL-S014-NW wall lamp is a versatile lighting solution, suitable for indoor use in dry locations. With its E26 socket, it supports up to 40W incandescent bulbs or equivalent CFL or 5W LED bulbs, providing bright and efficient illumination. The fixture allows for both hardwired and plug-in installation, offering flexibility in placement. Assembly is straightforward, involving attaching the cage to the backplate, wiring the fixture, and mounting it to the wall. The lamp's stylish design, with its black finish and exposed bulb, adds a modern touch to any room.

The WINGBO WBWL-S014-NW wall lamp is a versatile lighting solution, suitable for indoor use in dry locations. With its E26 socket, it supports up to 40W incandescent bulbs or equivalent CFL or 5W LED bulbs, providing bright and efficient illumination. The fixture allows for both hardwired and plug-in installation, offering flexibility in placement. Assembly is straightforward, involving attaching the cage to the backplate, wiring the fixture, and mounting it to the wall. The lamp's stylish design, with its black finish and exposed bulb, adds a modern touch to any room.

Page 1 of 4
Ax 1
x 2
I
H
B
G
x 2
x 3
x 1
x 1
C
D
E
F
J
Kx 1
x 1
x 1
x 1
x 1
Please make sure you have all the contents above when unpack the carton before starting the installation.
Do not throw away any above parts.
Page 2 of 4
L
M
x 2
x 2
Contents
Removable plug
when hardwired
Assembly
1
3
J
K
D
B
A
Plug in Installation
2
Push B into A to form the cage.
A & B
G
H
I
Assembly the backplate (D) to cage (A&B), first place the
washer (G) then screw the nut (H) with wrench (I).
Wire the black and white wires from
cage input wire to plugs black
and white wire, please alway
connect Black to Black,
White to White.
Put the Bulk (K) to socket
Mark the position for mounting
universal plate (F), insert the screws
(E) to plate before mounting,
insert Anchor (L) to wall,
secure the place with screw (M)
F
M
L
4
Mount the wall lamp to the
universal plate and secure
the decor nuts (C) to screws
5 6
c
Plug the plug into socket and turn
the light on /off, if not being lit up,
unplug and check the wiring on step 3
or the bulb, then try turning on
or off again.
Page 3 of 4
Black plug
wire
White plug
wire
Black fixture
wire
White fixture
wire
Assembly
Hardwired Installation
Push B into A to form the cage.
A & B
Wire the black and white wires from
cage input wire to supply black
and white wire, please alway
connect Black to Black,
White to White.
Put the Bulkb (K) to socket
Mount the universal plate (F)
to Junction box , secure
the plate with screws (E)
Mount the wall lamp to the
universal plate and secure
the decor nuts (C) to screws
Turn on light through the switch on wall.
If not being lit up, please check the wiring.
Loose and remove
the cable from cover
for hardwired
installation
Assembly the cover (D)
to the cage (A&B)
Black supply
wire
Page 4 of 4
White supply
wire
Black fixture
wire
White fixture
wire
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

WINGBO WBWL-S014-NW Installation guide

WBWL-S014-NW
WINGBO
Brand
WINGBO
Model
WBWL-S014-NW
Type
Installation guide

The WINGBO WBWL-S014-NW wall lamp is a versatile lighting solution, suitable for indoor use in dry locations. With its E26 socket, it supports up to 40W incandescent bulbs or equivalent CFL or 5W LED bulbs, providing bright and efficient illumination. The fixture allows for both hardwired and plug-in installation, offering flexibility in placement. Assembly is straightforward, involving attaching the cage to the backplate, wiring the fixture, and mounting it to the wall. The lamp's stylish design, with its black finish and exposed bulb, adds a modern touch to any room.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents