Assembly
1
3
J
K
D
B
A
Plug in Installation
2
Push B into A to form the cage.
A & B
G
H
I
Assembly the backplate (D) to cage (A&B), first place the
washer (G) then screw the nut (H) with wrench (I).
Wire the black and white wires from
cage input wire to plugs black
and white wire, please alway
connect Black to Black,
White to White.
Put the Bulk (K) to socket
Mark the position for mounting
universal plate (F), insert the screws
(E) to plate before mounting,
insert Anchor (L) to wall,
secure the place with screw (M)
F
M
L
4
Mount the wall lamp to the
universal plate and secure
the decor nuts (C) to screws
5 6
c
Plug the plug into socket and turn
the light on /off, if not being lit up,
unplug and check the wiring on step 3
or the bulb, then try turning on
or off again.
Page 3 of 4
Black plug
wire
White plug
wire
Black fixture
wire
White fixture
wire