2. SOLINTEG
  3. M 4-20kW

SOLINTEG M 4-20kW User guide

  • Hello! I have analyzed the Solinteg Inverter Configuration Guide Manual and I'm ready to assist you. This manual covers the setup, network connection, plant integration, and parameter configuration of your Solinteg Inverter. It details the necessary initial checks, methods for connecting via WiFi or LAN, and how to add your plant and inverter. The guide also explains both quick and nearby configuration methods for the inverter parameters. I'm here to help with any questions you may have about this process.
  • What checks are required before starting?
    How can I connect the inverter to the network?
    What is the process to configure the inverter parameters?
Solinteg Inverter Configuration Guide Manual
STEP 1 STEP 2 STEP 3 STEP 4
Check & Operation
Check List：
- Battery and inverter CAN wiring
- Inverter and battery ground wiring
- Communication module insertion
- Multi-function connector insertion
- Smart meter wiring and power
Operation order:
1. AC insurance (if any)
2. AC circuit breaker
3. Battery DC switch
4. Battery on button
5. Inverter PV DC switch
Network Connection
Via Solinteg APP
Solinteg APP
Way 1:
WiFi Communication
lPlug in WiFi module
lConnect to customer WiFi
- Customer WiFi ID
- Customer WiFi Password
Way 2:
LAN Communication
lPlug in the LAN module
lConnect LAN cable to
router
PS: If the router does not
open DHCP function, you need
to configure this function on
the inverter
Add Plant and Inverter
Via Solinteg Web or APP
Solinteg APP
WEB
www.solinteg-cloud.com
Create customer account
lCustomer Information
- Customer Email (unregistered)
- Required information such as plant type,
module capacity, etc.
lLocation information
lAdd equipment (see nameplate for serial
number and verification code)
lRevenue settings
PS: The customer's email will receive their account
and password after the creation is completed
Setting Path:
Plant Management/Add power plant
Nameplate
Parameters Configuration
Via Solinteg OR SolintegSet APP
Solinteg APP SolintegSet APP
START END
Way 1:
Quick Configuration
Way 2:
Nearby Configuration
Way 1:
lSelect local safety code
lSelect battery brand
lSelect working mode
lSet on/off-grid parameters
Setting Path:
Plants/Devices/Parameters
Setting/Configuration Wizard
Way 2:
1.Phone connected to
the inverter WiFi
(Make sure WiFi module is
plugged before connecting)
- WiFi name: WiFi-APxxxxx
2.Login SolintegSet APP
- Scan device: WiFi-APxxxxx
- Select installer role,
password: 123456
3.Parameter setting
- Grid parameters
- Battery brand
- Select local safety code
- Select working mode
- Set on/off-grid SOC value
/