2. WAVLINK
  3. WN570HP2

WAVLINK WN570HP2 User guide

  • Hello! I'm a chat assistant specialized in the Wavlink devices. I have read the provided document, which is a Quick Installation Guide for the WL WN570HP2 Wi-Fi Extender. This guide provides instructions for setting up the device in both LAN to Wi-Fi and Wi-Fi to Wi-Fi extension modes. I'm ready to answer any questions you may have about the installation, features, or troubleshooting of this product. Feel free to ask!
  • Why doesn't the login page appear after entering http://wifi.wavlink.com?
    How do I restore the device to its factory default settings?
    What should I do if the LED does not change to solid after completing?
Wi-Fi Signal
W
4
3
2
1
7
8
.
.
.
.
5
A3 A4
A5
A6
or
5
6
A
The Best Location
1. Plug the device into an electrical outlet between your router (Host Wi-Fi) and the Wi-Fi dead zone.
The location you choose must be within the range of your existing host Wi-Fi.
2. Wait until the Wi-Fi Signal LEDs is ON. If the signal is weak, relocate the device closer to your router for better Wi-Fi signal.
Configuration
Login Password
Old Password:
New Password:
Confirm Password:
Apply
Wi-Fi Range Extender
Connect
Wi-Fi Password:
2.4G SSID:
/