Hydrophobia® Rain Cover
EP-S Eyepiece Attachment
2. Align the groove on the EP-S with the
rails on the camera’s viewnder.
3. Firmly slide the EP-S down on the
viewnder rails until fully seated.
1. Remove the camera’s eyepiece by
sliding it upward and o the viewnder.
©2018 Think Tank Photo PIN0047a
a.
b.
Hydrophobia® Rain Cover
EP-NSI Eyepiece
Attachment
2. Screw the Nikon eyepiece onto the
EP-NSI.
3. Screw the EP-NSI into the camera
until snug.
1. (a) Remove the camera’s eyepiece by
ipping the viewnder shutter lever to
the “closed” position.
(b) Unscrew the eyepiece by turning it
counter-clockwise.
©2018 Think Tank Photo PIN0044a
Hydrophobia® Rain Cover
EP-N Eyepiece Attachment
2. Align the groove on the EP-N with the
rails on the camera’s viewnder.
3. Firmly slide the EP-N down on the
viewnder rails until fully seated.
1. Remove the camera’s eyepiece by
sliding it upward and o the viewnder.
©2018 Think Tank Photo PIN0043a
Hydrophobia
®
Rain Cover
EP-15 Eyepiece Attachment
2. Align the groove on the EP-15 with the
rails on the camera’s viewnder.
3. Firmly slide the EP-15 down on the
viewnder rails until fully seated.
1. Remove the camera’s eyepiece by
sliding it upward and o the viewnder.
©2018 Think Tank Photo PIN0045a
Hydrophobia
®
Rain Cover
EP-20 Eyepiece Attachment
2. Align the groove on the EP-20 with the
rails on the camera’s viewnder.
3. Firmly slide the EP-20 down on the
viewnder rails until fully seated.
1. Remove the camera’s eyepiece by
sliding it upward and o the viewnder.
©2018 Think Tank Photo PIN0046a
Hydrophobia® Rain Cover
EP-NZ Eyepiece Attachment
2. Align the groove on the EP-NZ with the
rails on the camera’s viewnder.
3. Firmly slide the EP-NZ down on the
viewnder rails until fully seated.
1. Remove the camera’s eyepiece by
sliding it upward and o the viewnder.
©2018 Think Tank Photo PIN0052a
Hydrophobia® Rain Cover
EP-F Eyepiece Attachment
2. Align the groove on the EP-F with the
rails on the camera’s viewnder.
3. Firmly slide the EP-F down on the
viewnder rails until fully seated.
1. Remove the camera’s eyepiece by
sliding it upward and o the viewnder.
©2019 Think Tank Photo PIN0055a
Hydrophobia® Rain Cover
EP-SP Eyepiece Attachment
2. Align the groove on the EP-SP with
the rails on the camera’s viewnder.
3. Firmly slide the EP-SP down on the
viewnder rails until fully seated.
1. Remove the camera’s eyepiece by
sliding it upward and o the viewnder.
©2021 Think Tank Photo PIN0065a
Hydrophobia® Rain Cover
EP-NZP Eyepiece Attachment
2. Align the groove on the EP-NZP with
the rails on the camera’s viewnder.
3. Firmly slide the EP-NZP down on the
viewnder rails until fully seated.
1. Remove the camera’s eyepiece by
sliding it upward and o the viewnder.
©2022 Think Tank Photo PIN0066a
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
