2. HYDROPHOBIA
  3. EP-S

HYDROPHOBIA EP-S Operating instructions

  • Hello! I've reviewed the user manual for the Think Tank Photo EP-S, EP-NSI, EP-N, EP-15, EP-20, EP-NZ, EP-F, EP-SP, and EP-NZP Eyepiece Attachments. This document guides you through the installation process of these eyepiece attachments for camera viewfinders. I'm ready to assist you with any questions you might have regarding the instructions or the device.
  • How do I remove the camera's eyepiece for EP-S, EP-N, EP-15, EP-20, EP-NZ, EP-F, EP-SP, and EP-NZP?
    How do I remove the camera's eyepiece for EP-NSI?
    How do I attach the EP-S, EP-N, EP-15, EP-20, EP-NZ, EP-F, EP-SP, and EP-NZP?
    How do I attach the EP-NSI?
Hydrophobia® Rain Cover
EP-S Eyepiece Attachment
2. Align the groove on the EP-S with the
rails on the camera’s viewnder.
3. Firmly slide the EP-S down on the
viewnder rails until fully seated.
1. Remove the camera’s eyepiece by
sliding it upward and o the viewnder.
©2018 Think Tank Photo PIN0047a
a.
b.
Hydrophobia® Rain Cover
EP-NSI Eyepiece
Attachment
2. Screw the Nikon eyepiece onto the
EP-NSI.
3. Screw the EP-NSI into the camera
until snug.
1. (a) Remove the camera’s eyepiece by
ipping the viewnder shutter lever to
the “closed” position.
(b) Unscrew the eyepiece by turning it
counter-clockwise.
©2018 Think Tank Photo PIN0044a
Hydrophobia® Rain Cover
EP-N Eyepiece Attachment
2. Align the groove on the EP-N with the
rails on the camera’s viewnder.
3. Firmly slide the EP-N down on the
viewnder rails until fully seated.
1. Remove the camera’s eyepiece by
sliding it upward and o the viewnder.
©2018 Think Tank Photo PIN0043a
Hydrophobia
®
Rain Cover
EP-15 Eyepiece Attachment
2. Align the groove on the EP-15 with the
rails on the camera’s viewnder.
3. Firmly slide the EP-15 down on the
viewnder rails until fully seated.
1. Remove the camera’s eyepiece by
sliding it upward and o the viewnder.
©2018 Think Tank Photo PIN0045a
Hydrophobia
®
Rain Cover
EP-20 Eyepiece Attachment
2. Align the groove on the EP-20 with the
rails on the camera’s viewnder.
3. Firmly slide the EP-20 down on the
viewnder rails until fully seated.
1. Remove the camera’s eyepiece by
sliding it upward and o the viewnder.
©2018 Think Tank Photo PIN0046a
Hydrophobia® Rain Cover
EP-NZ Eyepiece Attachment
2. Align the groove on the EP-NZ with the
rails on the camera’s viewnder.
3. Firmly slide the EP-NZ down on the
viewnder rails until fully seated.
1. Remove the camera’s eyepiece by
sliding it upward and o the viewnder.
©2018 Think Tank Photo PIN0052a
Hydrophobia® Rain Cover
EP-F Eyepiece Attachment
2. Align the groove on the EP-F with the
rails on the camera’s viewnder.
3. Firmly slide the EP-F down on the
viewnder rails until fully seated.
1. Remove the camera’s eyepiece by
sliding it upward and o the viewnder.
©2019 Think Tank Photo PIN0055a
Hydrophobia® Rain Cover
EP-SP Eyepiece Attachment
2. Align the groove on the EP-SP with
the rails on the camera’s viewnder.
3. Firmly slide the EP-SP down on the
viewnder rails until fully seated.
1. Remove the camera’s eyepiece by
sliding it upward and o the viewnder.
©2021 Think Tank Photo PIN0065a
Hydrophobia® Rain Cover
EP-NZP Eyepiece Attachment
2. Align the groove on the EP-NZP with
the rails on the camera’s viewnder.
3. Firmly slide the EP-NZP down on the
viewnder rails until fully seated.
1. Remove the camera’s eyepiece by
sliding it upward and o the viewnder.
©2022 Think Tank Photo PIN0066a
/