Kogan KAMN24FXCLB User guide

24" CURVED 16:9 FHD

GAMING MONITOR

1920 x 1080 144HZ

KAMN24FXCLB

• Read all instructions before using and retain for reference.

• This monitor is designed with ventilation holes on the back of the casing. Do not cover

or block them.

• Ensure the monitor is placed on a flat surface. If the monitor falls down, it may cause

human injury or device damage.

• Store and use the monitor in a cool, dry and well-ventilated place, and keep it away

heat sources.

• Do not insert any object or spray any liquid into the vents.

• Avoid placing the monitor near heaters, stoves, fireplaces or other sources of heat, as

well as in rooms lacking adequate ventilation.

• Do not position the monitor in unsafe locations. If the monitor falls, it may be damaged

and may injure nearby people.

• Unplug the monitor if it is not going to be used for an extended period.

• Do not place heavy objects on the monitor, its power cord or any connected cable.

• Do not open the back panel of the monitor, as it contains a high-voltage current even

when not plugged in.

• There is a polarizer layer (not a protective film) on the surface of the screen. Do not peel

it off, or the product may be damaged and the warranty will be invalid.

The terms HDMI and HDMI High-Definition Multimedia

Interface and the HDMI Logos are trademarks or registered

trademarks of HDMI Licensing Administrator, Inc. in the United

States and other countries.

SAFETY & WARNINGS

Monitor

Stand connector

Stand base

Stand screws (x3)

VESA screws (x4)

Cable guide

Silicone pad

DP cable

Power adapter

User guide

COMPONENTS

Button

Function

M

Menu button: Confirm/call up the main menu.

Down button: Move down in the menu/quickly enter the LED Effect.

Up button: Move up in the menu/quickly enter the ECO.

E

Exit button: Exit/return to the previous menu.

Power button: Turn on/off the monitor.

Indicator

Status

Blue

Power is on and the monitor operating normally.

Red

No horizontal or vertical signal detected, no video input signal or

the monitor is in standby.

Ensure your computer is turned on and operates normally and

check that all video cables are fully plugged in and/or connected to

the monitor.

OVERVIEW

Indicator

+

1. Open the carton, take out the stand and base, insert 2 screws into the base to lock

the stand then install the silicone pad. Attach the cable guide to the stand, as

shown below:

2. Remove the monitor out from the carton. Keep the monitor in the foam and place it

flat and face down, clip the stand assembly into the monitor and release the

button to complete the stand assembly.

3. Stand the monitor up on the assembled base.

ASSEMBLY

Stand screws

Silicone

pad

Cable

guide

button

VESA mounting pattern 75 x 75mm, screw size M4.

Note: VESA mount or mounting accessories are not included.

1. Open the box, take out the monitor with

protection foam attached and gently place it

on a desktop or table. Ensure all components

are removed from the foam covering. Press the

release button to remove the stand plate.

If the monitor is already attached to the stand,

remove the stand before proceeding with

VESA mount assembly.

2. Remove the two screws of the rear case.

3. Remove the four VESA screws from the accessory bag to and attach them to the

rear casing.

VESA MOUNT

Screws

VESA screws

4. During hanging of the product, do not pinch the screen with your hand to avoid

damaging the screen.

Instructions for attaching to the specific wall mount will be included with the

mount.

Notes: To prevent the monitor on the mount from failing, please install it firmly and protect it

fully. Do not place or hang any object on the mount. Ensure the height of the mount is less

than 2 meters.

Mount (not supplied)

Power Adapter

Connect the included power adapter to the monitor power port and then connect the other

end to a power outlet.

Audio Out

Connect an audio output device (speakers, headphone etc.) to the 3.5mm audio port on the

monitor.

CONNECTIVITY

Power adapter

Headphone/speakers

(not included)

HDMI

Connect an HDMI cable from the computer’s display output to the monitor’s display input.

DisplayPort

Use the supplied DP cable to connect the computer’s display output to the monitor’s

display input.

HDMI cable

(not included)

DP cable

1. Connect the monitor to your input device via HDMI or DP.

2. Connect the power cable to your monitor and then connect the other end directly

to a power socket.

3. Use the power button to turn the monitor on.

On-Screen Display (OSD)

The On-Screen Display (OSD) Menu may be used to adjust your monitor’s settings and

appears on the screen after turning on the monitor and pressing the (M) button.

When using the monitor for the first time, it will configure optimal settings automatically.

1. Press one of the buttons ( ) to activate the browser screen.

2. Press (M) to enter the OSD screen.

3. Press up and down ( / ) buttons to browse the functions.

With the desired function highlighted, press (M) button to enter the sub-menu.

Press up and down ( / ) buttons to browse sub-menus, then press (M) button to

confirm the desired function.

Press up and down ( / ) buttons to highlight an option, then press (M) button to

confirm the settings and exit the current menu.

4. Press (E) button to exit the menu screen.

OPERATION

List of Functions

Menu

Sub Menu

Option

BRIGHTNESS

0-100

CONTRAST

0-100

ECO

STANDARD/GAME/RTS/FPS/MOVIE/TEXT

DCR

OFF/NO

IMAGE

H.POSITION

N/A

V.POSITION

N/A

CLOCK

N/A

PHASE

N/A

ASPECT

WIDE/AUTO/4:3

COLOR TEMP.

WARM/USER/COOL

RED

0-100

GREEN

0-100

BLUE

0-100

OSD SETTING

LANGUAGE

ENGLISH/FRANÇAIS/DEUTSCH/简体中文

/ITALIANO/ESPAÑOL/PORTUGUÊS/TURKC

E/ POLSKI/NEDERLANDS/РУССКИЙ

한국/日本語

OSD H. POS.

0-100

OSD V. POS.

0-100

OSD TIMER

5-60

TRANSPARENCY

0-100

RESET

IMAGE AUTO ADJUST

N/A

COLOR AUTO ADJUST

N/A

RESET

MPRT

OFF/ON

MISC

SIGNAL SOURCE

DP/HDMI1/HDMI2

VOLUME

0-100

LOW BLUE RAY

0-100

ADAPTIVE-SYNC

OFF/ON

OVER DRIVE

OFF/HIGH/MIDDLE/LOW

LED EFFECT

NORMAL/FLICKER/OFF

Screen Size

24 inch

Aspect Ratio

16:9

Viewing Angle

178°(H) / 178°(V)

Pixel Pitch

0.09052(H) x 0.27156(V)

Contrast Ratio

3000:1

Display Color

16.7M

Resolution

1920×1080

Refresh Rate

144Hz

Power Input

DC 12V 2.5A

The standard voltage and power supply may vary with

countries, please refer to the label at the back of the product.

Product Dimensions

Without base: 537.8 x 74 x 333.5mm / approx. 2.63kg

With base: 537.8 x 200.4 x 410.1mm / approx. 3.25kg

Tilting Angle

Forward titling：5°±2

Backward tilting：15°±2°

Height Range

N/A

Rotation Angle

N/A

Vertical Angle

N/A

Environmental

Conditions

Action

Temperature: 0°C~40°C (32°F~104°F) Humidity: 10%~90%

RH (non-condensing)

Storage

Temperature: -20°~60° (-4°F~140°F) Humidity: 5%~95% RH

(non-condensing)

SPECIFICATIONS

NOTES

Need more information?

We hope that this user guide has given you

the assistance needed for a simple set-up.

For the most up-to-date guide for your product,

as well as any additional assistance you may require,

head online to help.kogan.com

Kogan KAMN24FXCLB User guide

Kogan KAMN24FXCLB User guide

Other documents