GARDE XL 181MCJ1 User guide

Type
User guide
USE CAUTION WHEN CLEANING
07/2023
ITEM NUMBER DESCRIPTION
181PMCJCONE Cone
181PMCJCUP Cup
181PMCJLEVER Lever
181PMCJRCBC Rubber Base Cup Cover
181PMCJRF Rubber Foot
181PMCJRLC Rubber Lever Cover
181PMCJSCREW Screw
181PMCJSQZR Squeezer
181PMCJWASH Washer
These parts can be purchased from the same location as the juicer.
REPLACEMENT PARTS
1. Remove reamer and strainer bowl from base.
2. Wash with mild soap (such as Noble Chemical’s
147SUNBRIGHT) and warm water.
3. Wipe the juicer with damp soft cloth and sanitizer (such as
Noble Chemical’s 147QUIKSAN).
4. Allow parts to dry and reassemble.
1. Position the juicer on a at, dry countertop.
2. Press down on the base so that the suction cups hold the
juicer to the counter.
3. Lock the bowl and straining funnel in place. There are
notches on the bottom of each which can be inserted into
the base and twisted to lock in place.
4. Place a container underneath the funnel to receive the juice.
5. Place halved fruit on reamer and hold in place until the
push block is in contact with the fruit.
REMOVE HAND BEFORE APPLYING DOWNWARD PRESSURE.
6. Press the handle down to extract juice.
OPERATION
Safety:
This juicer should only be operated by trained individuals. Be
sure to read the operation and cleaning guide before using.
CAUTION: KEEP HANDS CLEAR OF JUICING FUNNEL WHEN IN
USE TO AVOID RISK OF INJURY!
SAFETY INSTRUCTIONS
181MCJ1 - Manual Citrus Juicer
MODELS
HEAVY-DUTY MANUAL COMMERCIAL
CITRUS JUICER
181MCJ1
QUICK START GUIDE
  • Page 1 1

GARDE XL 181MCJ1 User guide

Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI