2. EDWARDS
  3. 171-4Z-D4

EDWARDS 171-4Z-D4 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the EDWARDS 171-4Z-D4 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
4/15/2015
171-4Z-D4 Installation Instructions Addendum
DPDT; 2 Independent SPDT Contacts
Each SPDT Switch is independent and will not switch simultaneously.
MAXIMUM Electrical Ratings
Circuit 1, Switch
SPDT
Load Rating AC 100 VA
DC 80 W
Switch Voltage AC 120V (@ 0.8A)
DC 28 V
Switching Current AC 3 A (@ 33V)
DC 3 A
Circuit 2, Switch
SPDT
Load Rating AC 100 VA
DC 80 W
Switch Voltage AC 120V (@ 0.8A)
DC 28 V
Switching Current AC 3 A (@ 33V)
DC 3 A
Sense Range
Nominal Sense Range 1.2” (3.0cm)
Nominal Break Range: 1.5” (3.8cm)
(As measured on a non-ferrous surface)
Circuits are independent and will not switch simultaneously.
Contact Resistance 1.0 ohm
10 Watt minimum switching current required.
Circuits shown with magnet actuator away from switch:
Circuit 1
COM N.O.
N.C
Circuit 2
COM N.O.
N.C
/