2. Pyle Pro
  3. AZSLSFE18FP

Pyle Pro AZSLSFE18FP, SLSFE18FP, SLSFE24FP Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Pyle Pro AZSLSFE18FP Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Models: SLSFE18FP | SLSFE24FP
FINGERPRINT-ENABLED
ELECTRONIC SAFE
USER MANUAL
2
!
Please do not keep emergency keys in your safe!
FUNCTION
DIAGRAM
FEATURES
• Locks:usinghigh-qualityanti-drillinglockingbolts,high-theftproofperformance.
• Initialization/Addkey:addngerprintregistrationordeletengerprintrecord
• Unlockkey:openthesafe
• Fingercollectorscreen:ngerprintregistration
• Numberkeysonthepanel:representing1,2,3,4separately
• Key"1":setusecode
• Gildedbadge:removethecoverandopenemergencylock
• Powersupply:4XAAbatteries
• Thissafeisahigh-techproduct,andplaysastrongroleinpsecurity.
• Usengerprintrecognitioninsteadofakeyordigitalcodeforgreaterconvenience
• Maximumof20ngerprintscanberegistered
• Constructedfromsolidmaterialstoresistattackfromhand&powertools
• User-friendlyproduct,originaldesign,uniquestructure
3
!
!
!
!
NOTE: For security of your property, you will need to change the preset code.
PREPARATION
POWER SUPPLY
FINGERPRINT REGISTRATION
SET USER CODE
• Thesafeondeliverycomeswithnoregisteredngerprints.
• Thesafeisnotloadedwithbatteries,youmayinserttheemergencykeyintothe
emergencykeyholetoopenthedoor.
• Uncoverthebatterycompartmentcoveratthebackofdoor.Andputin4XAA
batteries.Pleasepayattentiontothepolarityofthebatteries.Fornormaluse,the
batterieslastuptooneyear.
• Thepresetcodeofsafeondeliveryis"1234",theusermayopenthedoorwiththe
presetcodewhenbatteriesareplacedandtestednormal.
• Pullthedooropen.
• Pulloutthebatterycompartmentcover.
• Replace4freshbatteriesbyliningthemupinamannerasindicatedbythe"+"and
"-"signs.
NOTE: If the red light activates, it means the batteries are low. So you can plug
the emergency battery boxes into the jack to power. While choosing batteries,
it’s suggested to use high-powered, high quality alkaline batteries. Please do
not use any inferior, counterfeit or carbon-zinc batteries.
NOTE: A maximum of 20 ngerprints can be registered.
NOTE: Factory preset code is 1234.
• PressInitialization/Addkey,andyou’llhearashort"Bleep,Bleep".
• Putyourngeratngercollectorscreenwheretheredlightis.You’’llhear"Bleep,
Bleep"fortwotimes.
• Afteraboutasecond,along"Bleep"followsashortone,whichmeansthatngerprint
registrationsucceeded.(3 short "Bleep, Bleep, Bleep" means registration failed.)
• Accordingtothismethod,youcanregisterotherngerprints.
Pressnumberkey"1"forabout5seconds,thegreenindicatorlightwillturnon.Input
thecurrent/originalcodeandpresstheunlockkeytoconrm.Afterhearinga"Bleep",
inputnewcode(4to8digits)andpresstheunlockkey.Inputthecodeagain,and
presstheunlockkey.Hearinga"Bleep"meanstheoperationwassuccessful.
4
SET USER CODE
EMERGENCY KEY
• Fingerprint unlock:Pressunlockkey,theredlightatngercollectorscreenison.
Don'tremoveanyngerprintregisteredatngercollectorscreenuntiltheredlight
o.Afterhearingalong"Bleep",thegreenlightshinning,motordrives.Pleaseturn
theknobclockwise,thenunlocksucceed.
• Password unlock:Inputcode(4to8digits)andpressunlockkeytoconrm.After
hearingalong"Bleep",thegreenlightshinning,motordrives.Pleaseturntheknob
clockwise,andunlocksucceed.
NOTE: In order to improve the success rate of nger identication, users
can refer to the following advice: Avoid using the nger collector screen
in bright light. It’s suggested that each user registers 2-3 ngerprints. Women
and children should try to register with thumb and middle nger. Try to press
with even weight for an accurate print. Avoid pressing with too much or too
little weight. If the air is very dry, try breatheing on ngers till a little wet.
NOTE: For your total security, please take care of the emergency key and
keep them in one secret place OUTSIDE of the safe.
!
!
Duringrstuse,incaseofcircuitmalfunction,ifyouforgotyourcodes,oryourngerprint
isn’tbeingrecognized,youcouldalsousetheemergencykeytoopenthesafe.
• Useinside-hexagonalspannertoopenthegildedbadgeonthesafedoor,thenyouwill
seetheemergencylock.
• Unlockwithemergencykey,andturntheemergencykeycounterclockwiseonthe
panel.
• Turntheknobclockwiseandopenthesafedoor.
5
SYSTEM INITIALIZATION/DELETION
IMPORTANT NOTES
PresstheInitialization/Addkeyforaround5seconds,thegreenindicatorlightwillblink
about12times.Letgoofthekeywhenitstopsblinking.Afterhearingalong"tick",alln-
gerprintsrecordsinthemodulewillbeeliminatedandreturntofactorysetting.
• Donotuseliquidorasprayertocleanthesafe.Useawetclothinstead.
• Donotplacetheproductinaninsecureandelevatedplace,lestitmayfalloverand
damagetheproductorhurtpeople.Neverspillliquidoverthecontrolpanel,oritmay
causeelectricalshocktotheelectronicpartsinsideanddisabletheirproperfunctions.
• Nevertrytodismantletheproductbyyourself.UnguidedDismantlingandincorrect
reassemblyoftheinsideofbackcovermaydamagetheelectricalcircuitandaectsits
performance.Wheremaintenanceisrequired,pleasecontactthelocalservicecenteror
localdistributor.
For additional help, please consult the local distributor
/