Pyle Pro PSLMRP15 Owner's manual

Mosquito Repellent

User Manual

PSLMRP15

Install:

1) Open the back battery compartment (anticlockwise rotation), install 2xAAA battery(not including), and close the

compartment. Take care +/-

2) Pull out the top white cover and put 1 piece absorbent pad (we will offer 12pcs) and then close the cover.

Working Mode:

The item is controlled by intelligent chip and with low power consumption. There are 2 working modes for you to choose:

Mode 1: sonic wave. Push up the switch with speaker, and the item will emit sonic wave which can irritate the mosquito

nervous system to make them painful and discomfortable and then flee away.

Mode 2: Lavender alcohol,The main ingredient is : Lavender alcohol , vanilla aldehyde , lavender oil .Push up the switch

with fans, smell will spread through the fans. The smell will irritate the mosquito sensory system and make them feel painful

anddiscomfortable and then fly away. The effective area for the smell is about 15-30 square meters.

Note: under mode 2, please rotate the top cover and you will see the fans and this will help the smell spread. One piece

absorbent pad can be used for 15 days.

Caution:

1. Keep refill out of reach from small children.

2.Don’t put refill exposure to the sun.

3.Do not contact with eyes.

4.Do not eat the pad.

This manual is also suitable for

Download PDF