Teeter Heavy Duty Equipment Mat User guide

• DO NOT place sharp objects on the mat or fold the mat as this can cause permanent damage.

• DO NOT leave spills unattended or allow water/moisture to become trapped underneath.

• ALWAYS use caution when cleaning your mat or you could cause damage. See below for proper care instructions.

• ALWAYS use caution when lifting and placing heavy objects onto the mat to avoid injury.

WARNING

Heavy-Duty Equipment Mat

• Ensure that the area on which you intend to place the mat is a dry, level surface and is clean and clear of debris.

• Place the Heavy-Duty Equipment Mat ﬂat on the ﬂoor where you want to setup your equipment.

• Lift or roll the equipment onto the mat, ensuring that the mat stays ﬂat on the ﬂoor and there are no folds in the mat

surface. Ensure that the equipment is level and not hanging off any area of the mat.

• TO CLEAN: Wipe the surface of the mat with a cloth, sponge or paper towel using a mild soap (like dish washing detergent)

and water. Dry thoroughly.

• DO NOT use to clean: Household cleaners such as all-purpose, window or ﬂoor cleaners; degreasers; a power vacuum

cleaner with rotating brush; a washing machine; a steam cleaner or high pressure water/air.

Use & Care Instructions

Teeter and Teeter logo are registered trademarks of Teeter. Speciﬁcations subject to change without notice.