Glowshift GS-CPH-304 Operating instructions

Rev. 2022

1998-2002 Dodge Ram Cup Holder

(Will not fit 2002 Dodge Ram 1500)

Note: This Add on Cup holder is not intended to be used with a manual vehicle.

1. Open the center console lid.

2. Clear out any items that are in the front section of the console.

3. Clean the inside of the console where the pre-applied double-sided tape is mounted to the

underside of the Cup Holder using an alcohol prep pad.

4. Remove the double-sided tape backing and slide the Cup Holder into place making sure that the

12-Volt accessory cover is out of the way and press firmly to seat the tape.

5. Close the console lid firmly to ensure the console lid latches.

All GlowShift Products are subject to the GlowShift Limited Warranty. Please visit

https://www.glowshiftdirect.com/warranty-policies to review complete Warranty, Terms, and Conditions.